New products

The SYNOXX EDSP5X-3 is a 56G SFP56 to SFP56 passive Direct Attach Copper (DAC) cable designed for high-speed short-distance network connections. Supporting data rates up to 56 Gbps over a 3-metre twinax copper cable, it is ideal for server-to-switch, storage, leaf-to-server, and adjacent-rack connections. The cable uses PAM4 signaling, supports hot-pluggable SFP56 interfaces, and provides a low-power, low-latency, cost-effective alternative to optical transceivers for short-reach 56G Ethernet deployments.

The SYNOXX EDQD400-2QPx is a high-speed 400G QSFP-DD to 2x200G QSFP56 Direct Attach Copper breakout cable designed for short-distance, high-bandwidth network connections. It supports 400Gbps aggregate data rate using PAM4 signaling, making it suitable for data centers, high-performance computing, storage networks, telecom, and switch-to-switch interconnections.

The SYNOXX EDQD400-4QPx is a high-speed 400G QSFP-DD to 4x100G QSFP56 breakout DAC cable designed for data centers, high-performance computing, storage networks, switches, routers, and telecom infrastructure. It supports 400Gbps aggregate data rate using PAM4 signaling and is available in short-distance passive copper cable lengths.

Outdoor 5G CPE with an omnidirectional antenna system that connects to the best available network without antenna realignment. Built-in eSIM and microSIM support, GNSS positioning (GPS, Galileo, BeiDou, QZSS), and Gigabit Ethernet with PoE-in. IP67-rated and EN 60945 maritime certified for ports, marinas, industrial sites, and urban or backup deployments.

Industrial-grade 1G/2.5G multi-mode SFP module for fiber links up to 550 m over 850 nm with a duplex LC connector. Built-in DDM digital diagnostics monitor optical power, voltage, temperature, and laser bias current in real time. Ideal for enterprise networks, data centers, industrial deployments, and ISP infrastructure.

Industrial-grade 1G/2.5G single-mode SFP module for long-distance links up to 20 km over 1310 nm with a duplex LC connector. Built-in DDM digital diagnostics monitor optical power, voltage, temperature, and laser bias current in real time. Ideal for backbone links, campus networks, industrial deployments, and ISP infrastructure.

The SYNOXX EDQD400-4QPx is a high-speed 400G QSFP-DD to 4x100G QSFP56 breakout DAC cable designed for data centers, high-performance computing, storage networks, switches, routers, and telecom infrastructure. It supports 400Gbps aggregate data rate using PAM4 signaling and is available in short-distance passive copper cable lengths.

The MikroTik ATL 5G R16 (ATLGM&RG520F-EU) is MikroTik's first outdoor 5G CPE with built-in eSIM — a rugged, IP66-rated, snow-resistant outdoor unit combining a 16 dBi high-gain directional antenna array (4× mid-band + 4× low-band), 5G Release 16 modem with LTE Cat 20, 4×4 MIMO, full Band 28 support for rural low-band coverage, eSIM with MikroTik Connectivity alongside Micro SIM, 1× Gigabit Ethernet with 802.3af/at PoE-in, dual-core ARM64 88F3720 CPU at 800 MHz, 512 MB RAM, passive cooling, and RouterOS v7 License Level 3. Install it on any rooftop, pole, or mast, power it with a single PoE cable, and be online in minutes with no SIM card required.

The MikroTik G1251-0150WNA is a 150W hot-swappable replacement power supply designed for the CRS812 DDQ. It delivers 12V DC at 12.5A and can be replaced while the switch is running, helping maintain network uptime without restarting the device. 

The MikroTik MTP60-12V50-RS-DC is a 60W DC-DC hot-swappable power supply designed for compatible MikroTik devices including the CCR2004-16G-2S+, CRS504-4XQ-IN, and CRS510-8XS-2XQ-IN. It accepts -36V to -57V DC input and provides 12V DC output at up to 5A, making it ideal for integrating these devices into -48V DC-powered infrastructure while maintaining redundant power capability.