MikroTik CCR2004-16G-2S+PC Passive 16-Port Router L6
The MikroTik CCR2004-16G-2S+PC is a passively cooled cloud core router — quad-core ARM64 Amazon Annapurna Labs AL32400 (Alpine v2) at 1.2 GHz, 2× Marvell 88E6191 switch chips, 4 GB DDR4 RAM, 128 MB NAND, RouterOS v7 License 6, 16× Gigabit Ethernet (2× groups of 8, each with dedicated 10G CPU uplink), 2× SFP+ (10G), RJ45 serial console, 1× USB, 2× DC inputs (DC jack + 2-pin terminal, 36–57V), 36W max / 30W without attachments, fully passive cooling, IP20, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, 48V 0.95A adapter, K-83 kit. USD 465.00.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MikroTik CCR2004-16G-2S+PC is the fanless variant of the CCR2004-16G-2S+PC — identical routing hardware to the CCR2004 series, with the fans replaced by passive thermal management for completely silent operation at USD 465.00. It is the correct choice when router performance equivalent to the previous-generation CCR1009 is required without fan noise — in an office, studio, homelab, or server room where acoustic environment matters.
**AL32400 Alpine v2 — quad-core ARM64 Cortex-A57 at 1.2 GHz**
The Amazon Annapurna Labs AL32400 is a quad-core ARM64 Cortex-A57 at 1.2 GHz — the same CPU family used across the CCR2004 series. MikroTik benchmarks the CCR2004-16G-2S+PC at up to 300% faster than the previous-generation CCR1009 routers at the same routing tasks — routing, firewall, NAT, WireGuard VPN, IPsec, and BGP table processing. With 4 GB DDR4 RAM — the largest RAM in any device in this session, four times the RB5009UPr+S+IN's 1 GB — the CCR2004-16G-2S+PC has headroom for large BGP full routing tables (approximately 900,000+ IPv4 routes in a full internet BGP feed), extensive firewall rulesets, WireGuard tunnels, and RouterOS container workloads simultaneously.
**Dual Marvell 88E6191 switch chips — no internal bottleneck**
The 16 Gigabit Ethernet ports are divided into two independent groups of 8, each connected to a dedicated Marvell 88E6191 Amethyst family switch chip. Each switch chip has its own dedicated 10 Gbps full-duplex line to the AL32400 CPU — and each SFP+ cage also has a separate dedicated 10 Gbps full-duplex line to the CPU. MikroTik's own framing: "no bottlenecks — as long as the CPU can handle the processing, all ports can reach wire speed." In practice, traffic between ports within the same 8-port group is hardware-switched by the 88E6191 at line rate without CPU involvement. Inter-group and routed traffic passes through the CPU's four ARM64 cores.
**Passive cooling — completely silent operation**
The "PC" suffix denotes Passive Cooling — no fans, no moving parts, zero acoustic output. The CCR2004-16G-2S+PC dissipates its 36W max thermal load (30W without attachments) through the enclosure heatsink alone. MikroTik's marketing for this device is direct: "the silent powerhouse — enjoy all the power of a real CCR in peace and quiet — get rid of all the hum and buzz in your office, studio, server room or homelab without sacrificing the performance." The operating temperature range (-20°C to +60°C) reflects the passive cooling constraint — slightly narrower than the RB5009UPr+S+IN's -40°C to +60°C. For deployment in a temperature-controlled server room, office, or homelab, the -20°C to +60°C range presents no operational limitation.
**RouterOS v7 License 6 — full enterprise routing feature set**
License 6 provides unlimited BGP peers, OSPF areas, and VRF instances — directly relevant for the CCR2004-16G-2S+PC's primary use case as a silent BGP edge router or core router for a small or medium ISP, enterprise, or advanced homelab. WireGuard, IPsec, hotspot gateway, CAPsMAN controller, VLAN, scripting, SNMP, and ARM64 container support are all available at License 6 with 4 GB DDR4 RAM providing substantial container and workload headroom.
**SMB and ISP deployment architecture**
MikroTik's own recommended deployment: "Gigabit Ethernet ports for the internal network; SFP+ ports for downlink and uplink — the perfect all-in-one solution for small and medium-sized businesses." In practice: Ether1 as WAN (or SFP+ for 10G ISP handoff), Ether2–16 as LAN switch ports across two independent 88E6191 switch domains, SFP+ ports for 10G uplinks to CRS510, CRS518, or upstream provider equipment.
**5-year software support guarantee:** RouterOS v7 updates free for life of product or minimum 5 years from date of purchase.
**Canadian market note:** CE, EAC, RoHS only — no FCC, no IC (ISED) published. Wired router, no wireless transmitter — no ISED wireless advisory applies. Confirm CSA/cUL electrical safety requirements with distributor before listing, particularly given the DC jack 36–57V input range.
Key specifications:
- **Product code:** CCR2004-16G-2S+PC
- **CPU:** Amazon Annapurna Labs AL32400, quad-core ARM64 Cortex-A57, 1.2 GHz
- **Switch chips:** 2× Marvell 88E6191 (Amethyst family), 8 ports each
- **RAM / Storage:** 4 GB DDR4 / 128 MB NAND
- **OS:** RouterOS v7, License 6
- **GbE ports:** 16× (10/100/1000), 2 groups of 8
- **SFP+ ports:** 2× (10G)
- **Serial console:** RJ45
- **USB:** 1×
- **DC inputs:** 2× (DC jack 36–57V + 2-pin terminal 36–57V)
- **Max power:** 36W (30W without attachments)
- **Cooling:** Fully passive (PC suffix)
- **IP rating:** IP20
- **Operating temp:** -20°C to +60°C
- **MTBF:** ~200,000 hours at 25°C
- **Dimensions:** 272 × 195 × 44 mm
- **Certifications:** CE, EAC, RoHS — no FCC, no IC
- **Included:** Rack ears, 48V 0.95A adapter, K-83 kit
- **Suggested price:** USD 465.00
- Product code
- CCR2004-16G-2S+PC
- Architecture
- ARM 64bit
- CPU core count
- 4
- CPU nominal frequency
- 1200 MHz
- Size of RAM
- 4 GB
- Storage type
- NAND
- MTBF
- Approximately 200'000 hours at 25C
- Tested ambient temperature
- -20°C to 60°C
- Number of DC inputs
- 2 (DC jack, 2-pin terminal)
- DC jack input Voltage
- 36-57 V
- Max Power consumption
- 36 W
- Max power consumption without attachments
- 30 W
- 10/100/1000 Ethernet ports
- 16
- Dimensions
- 272 x 195 x 44 mm
- 2-pin terminal input Voltage
- 36-57 V
- CPU temperature monitor
- Yes
- Voltage Monitor
- Yes
- PCB temperature monitor
- Yes
- RouterOS Compatibility
- RouterOS
- Certification
- CE, EAC, ROHS
General information
All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.
Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.
Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.
Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.
Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.
Remote training sessions and certification exams are not allowed.
MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.
Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.
The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.
Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.
Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.
Certificates will only be valid for three years.
Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.
By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.
Returns:
All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase. All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.
