MikroTik CRS418-8P-8G-2S+WiFi Wi-Fi 6 Rackmount Switch
The MikroTik CRS418-8P-8G-2S+5axQ2axQ-RM is the Wi-Fi edition of the proven CRS418 rackmount platform — adding 4×4 MIMO dual-band Wi-Fi 6 to an already powerful 1U switch. It combines 16× Gigabit Ethernet ports (8 with 802.3af/at PoE-out), a dedicated Gigabit management port, 2× 10G SFP+ uplinks, a quad-core 2.2 GHz ARM64 CPU with L3 hardware offloading, 1 GB RAM, dual redundant AC power supplies, USB 3.0, and RouterOS v7 License Level 5 — all at USD 499. Eliminate the separate access point, the separate router, and the separate firewall, and replace them with one clean 1U device that does it all.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MikroTik CRS418-8P-8G-2S+5axQ2axQ-RM is the answer to the perennial server room problem: too many boxes, too many cables, too many points of failure. This is a single 1U rackmount device that handles switching, routing, PoE distribution, 10G fiber uplinks, Wi-Fi 6 coverage, USB storage, firewall duties, and CAPsMAN wireless control — simultaneously, without subscriptions, and without breaking the budget.
The 4×4 MIMO dual-band Wi-Fi 6 radio is MikroTik's strongest to date in a rackmount form factor — 1,148 Mbps at 2.4 GHz and 2,400 Mbps at 5 GHz. MikroTik engineered dedicated pigtail holes in the rear panel so external antennas can be routed outside the rack enclosure — solving the coverage problem that has always made rack-mounted wireless impractical.
The quad-core IPQ-8072A ARM64 CPU at 2.2 GHz, paired with 1 GB RAM and the 98DX226S switch chip with L3 hardware offloading, delivers enough processing power to run as an internet gateway, full firewall, VLAN router, and CAPsMAN controller simultaneously — replacing what would typically require three or four separate devices.
Key features:
- 4×4 MIMO dual-band Wi-Fi 6 — 1,148 Mbps at 2.4 GHz (802.11b/g/n/ax, QCN-5024, 5 dBi) + 2,400 Mbps at 5 GHz (802.11a/n/ac/ax, QCN-5054, 6 dBi)
- Dedicated pigtail holes in rear panel — route external antennas outside the rack for real-world coverage
- 16× 10/100/1000 Mbps Gigabit Ethernet ports + 1× dedicated Gigabit management port with direct CPU line (17 total)
- 8× PoE-out ports (Ether9–Ether16) — 802.3af/at, 150W total PoE budget, low-voltage limit 1.1A / high-voltage limit 0.56A
- 2× 10G SFP+ uplink cages — fiber ISP hand-off, core switch uplinks, high-speed NAS
- L3 hardware offloading — wire-speed routing between VLANs without CPU overhead
- Quad-core IPQ-8072A ARM 64-bit CPU, 2,208 MHz, 1 GB RAM, 128 MB NAND
- 98DX226S switch chip
- Dual redundant AC power inputs (100–240V, 50–60 Hz) — hot-swap capable, 2 PSU slots
- 1× USB 3.0 Type-A port (up to 1A) with USB Power Reset — storage, backups, configuration
- RJ45 serial console port for out-of-band management
- 4-fan active cooling, -20°C to +70°C, MTBF ~200,000 hours at 25°C
- Max power consumption 227W (43W without attachments)
- CPU temperature, PCB temperature, current, and voltage monitoring
- RouterOS v7, License Level 5 — VLANs, ACLs, SNMP, firewall, CAPsMAN, traffic shaping, advanced monitoring — no subscriptions, no paywalls
- Certified CE, FCC, IC, EAC, RoHS | IP20
In the box: IEC cord (×2), K-100 fastening set.
Ideal for: small and medium offices consolidating switching, routing, PoE, and Wi-Fi into a single 1U device; server rooms and network closets replacing a stack of separate appliances; WISPs and ISPs needing a CAPsMAN controller with built-in switching; homelabs and network labs; and any deployment where budget, rack space, and cable hygiene all matter at the same time.
General information
All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.
Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.
Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.
Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.
Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.
Remote training sessions and certification exams are not allowed.
MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.
Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.
The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.
Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.
Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.
Certificates will only be valid for three years.
Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.
By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.
Returns:
All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase. All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.
