MikroTik LHG 60G 60GHz P2MP CPE 800m Outdoor
The MikroTik LHG 60G is a high-speed outdoor 60 GHz CPE unit designed for Point-to-Multipoint wireless deployments. Built around the 802.11ad standard, it is purpose-built for environments where 2.4 GHz and 5 GHz spectrum is congested and unreliable, offering an interference-free 60 GHz alternative with data rates up to 2 Gbps. Up to eight LHG 60G units can connect simultaneously to a compatible 60 GHz access point, such as the wAP 60G AP or wAP 60Gx3 AP, with a maximum P2MP range of 800 metres and P2P range of up to 1,500 metres. The unit features a built-in grid antenna, a single Gigabit Ethernet PoE port, passive cooling, an IP55 weatherproof enclosure, and an operating temperature range of -40°C to +70°C. It runs RouterOS Level 3 on a quad-core ARM processor.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MikroTik LHG 60G (RBLHGG-60ad) is an outdoor 60 GHz CPE device engineered for Point-to-Multipoint (P2MP) wireless links. Operating in the 60 GHz band via the 802.11ad standard, it sidesteps the spectrum congestion common in 2.4 GHz and 5 GHz networks, delivering clean, high-speed connectivity at data rates of up to 2 Gbps. It is designed to be used as a subscriber unit, connecting back to a 60 GHz base station such as MikroTik's wAP 60G AP or wAP 60Gx3 AP, with up to eight LHG 60G units supported per access point.
Range and Antenna The LHG 60G achieves P2MP distances of up to 800 metres and P2P distances of up to 1,500 metres between two units. The antenna element is built directly into the wireless unit, eliminating cable losses. The grid dish design provides structural resistance against wind loads. For precision installation, the unit ships with an Aim tool to assist with exact antenna alignment.
Processing and System The LHG 60G is powered by a Qualcomm IPQ-4019 quad-core ARM 32-bit processor running at 448–896 MHz (auto-scaling), with 256 MB of RAM and 16 MB of FLASH storage. It runs RouterOS Level 3, providing full access to MikroTik's routing, firewall, and management feature set appropriate for a CPE device.
Connectivity The unit includes a single 10/100/1000 Mbps Ethernet port, which also serves as the PoE input, accepting 802.3af/at PoE at 12–57 V. Maximum power consumption is 5 W. A 24V 0.38A power adapter and Gigabit PoE injector are included in the box, along with an LHG mount for installation.
Enclosure and Environmental The LHG 60G carries an IP55 weatherproof rating, making it suitable for permanent outdoor deployment. It is tested and rated for an operating temperature range of -40°C to +70°C, and uses passive cooling with no moving parts.
Certifications CE, FCC, IC, EAC, RoHS.
Key Specifications at a Glance
- Product Code: RBLHGG-60ad
- Architecture: ARM 32bit
- CPU: Qualcomm IPQ-4019, Quad-core, 448–896 MHz (auto)
- RAM: 256 MB
- Storage: 16 MB FLASH
- Operating System: RouterOS
- RouterOS License: Level 3
- Wireless Standard: 802.11ad (60 GHz)
- Max Wireless Data Rate: Up to 2 Gbps
- Max P2MP Range: 800 m (to 60 GHz AP)
- Max P2P Range: 1,500 m (between two LHG 60G units)
- Max Clients per AP: 8
- Ethernet Ports: 1× 10/100/1000 (PoE-IN)
- PoE Input: 802.3af/at, 12–57 V
- Max Power Consumption: 5 W
- Cooling: Passive
- IP Rating: IP55
- Operating Temperature: -40°C to +70°C
- Certifications: CE, FCC, IC, EAC, RoHS
- Included: 24V 0.38A power adapter, Gigabit PoE injector, LHG mount, Aim tool
- Product code
- RBLHGG-60ad
- Architecture
- ARM 32bit
- CPU
- IPQ-4019
- CPU core count
- 4
- CPU nominal frequency
- 716 MHz
- Size of RAM
- 256MB
- Storage size
- 16MB
- Storage type
- FLASH
- Tested ambient temperature
- -40°C to 70°C
- Number of DC inputs
- 1 (PoE-IN)
- Max Power consumption
- 7W
- PoE in
- 802.3af/at
- PoE in input Voltage
- 12-57 V
- 10/100/1000 Ethernet ports
- 1
General information
All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.
Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.
Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.
Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.
Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.
Remote training sessions and certification exams are not allowed.
MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.
Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.
The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.
Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.
Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.
Certificates will only be valid for three years.
Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.
By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.
Returns:
All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase. All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.
