AI Networking & Data Center

The MikroTik CCR2216-1G-12XS-2XQ is MikroTik's flagship cloud core router — Amazon Annapurna Labs AL73400 16-core ARM64 at 2,000 MHz, Marvell Prestera Aldrin2 98DX8525 switch chip (L3 hardware offloading, 4× 25G CPU lines), 16 GB DDR4 RAM, 128 MB NAND, 2× M.2 SATA slots, RouterOS v7 License 6, 12× SFP28 (25G), 2× QSFP28 (100G), 1× GbE, RJ45 serial console, 2× hot-swap AC PSU (100–240V, 50–60 Hz), 4× hot-swap fans, 128W max / 80W without attachments, CPU + PCB + voltage monitors, IP20, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 2× IEC cord, rack ears, cable management brackets, K-82 fastening set. USD 2,795.00.

The MikroTik ROSE Data Server (RDS2216) is a 1U rackmount enterprise platform that converges 100G networking, 20-bay U.2 NVMe storage, and OCI container compute into a single device — eliminating the cost, complexity, and power overhead of separate storage, networking, and compute infrastructure. Powered by a 16-core AL73400 ARM64 CPU at 2 GHz, 32 GB DDR4 RAM, dual hot-swap PSUs (max 286W), 2× 100G QSFP28, 4× 25G SFP28, 4× 10G SFP+, 2× 10G Ethernet, and the special ROSE edition of RouterOS v7 License Level 6 — it runs MinIO, Nextcloud, PostgreSQL, RAID, NVMe-TCP, iSCSI, BTRFS, and TCG-Opal self-encrypting drives with no subscriptions, no paywalls, and no vendor lock-in. You buy it. You own it. Forever.

The MikroTik CRS518-16XS-2XQ-RM is an enterprise-grade 1U rack-mount switch delivering 16× 25 Gigabit SFP28 ports and 2× 100 Gigabit QSFP28 ports, all driven by the Marvell Prestera Aldrin2 (98DX8525) switch chip with a non-blocking switching fabric of up to 1.2 Tbps. The 25G SFP28 ports are fully backward compatible with 10G and 1G SFP devices. Dual hot-swap power supplies with a 100–240 V AC input range and four active cooling fans ensure reliable operation in demanding data centre and enterprise deployments. Running RouterOS v7 with a Level 6 licence, it supports VLAN (802.1Q, 802.1ad), L3 hardware offloaded routing, ACL, LACP, MLAG, and Jumbo frames — making it a powerful and cost-effective core or aggregation switch for high-density 25G and 100G networks.

The SYNOXX EQD400-LR4 is a 400G QSFP-DD LR4 hot-pluggable optical transceiverdelivering 400Gbps via 4×100G PAM4 WDM lanes at 1310nm over single-mode fiber(SMF) to 10km — the long-reach member of the SYNOXX 400G QSFP-DD transceiverfamily for data centre interconnect (DCI),
campus backbone links, ISP aggregation,and any 400G Ethernet deployment requiring optical reach well beyond the 100m OM4ceiling of SR8 transceivers and the 3m passive copper limit of QSFP-DD DAC cables.Compliant with QSFP-DD MSA, IEEE 802.3bs, and 400GAUI-8, featuring a Duplex LCconnector, DDM/DOM monitoring (temperature, voltage, bias current, Tx/Rx opticalpower), power consumption below 10W, and operating temperature 0°C to 70°C.IC Certified for Canada and the US.

The MikroTik CRS510-8XS-2XQ-IN is a compact 1U 100 Gigabit data centre switch — 8× 25G SFP28 ports + 2× 100G QSFP28 ports, Marvell 98DX4310 Prestera switch ASIC, single-core MIPSBE QCA9531 at 650 MHz, 128 MB RAM, 32 MB FLASH, RouterOS v7 License 5 / SwitchOS (dual-boot), 1× 10/100 Ethernet management port, RJ45 serial console, 5 power input options (2× hot-swap AC PSU slots 100–240V + DC jack 36–57V + 802.3bt PoE-in 42.5–57V + 2-pin terminal 36–57V), 2-fan active cooling, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes 2× IEC cord, rack ears for CRS510, K10 screw kit, connector plug. 

The MikroTik CCR2116-12G-4S+ is a 1U rack-mount ISP edge router — Amazon Annapurna Labs AL73400 16-core ARM64 at 2,000 MHz, Marvell Aldrin 98DX3255 switch chip (L3 hardware offloading, 4× 10G CPU lines), 16 GB DDR4 RAM, 128 MB NAND, 1× M.2 PCIe slot, RouterOS v7 License 6, 12× GbE (switch chip) + 1× GbE (direct CPU management), 4× SFP+ (10G), RJ45 serial console, 2× AC PSU (100–240V, 47–63 Hz), 4 fans, 83W max / 60W without attachments, CPU + PCB + voltage monitors, mode button, 443 × 199 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 2× IEC cord, rack bracket, K-57 kit. USD 995.00.

The SYNOXX EQD400-FR4 is a 400G QSFP-DD FR4 hot-pluggable optical transceiverdelivering 400Gbps via 4 CWDM optical channels using PAM4modulation over single-mode fiber to 2km — the campus edge and metro accessmember of the SYNOXX 400G QSFP-DD optical family, positioned between the EQD400-SR8and the EQD400-LR4 for deployments requiring400G optical reach beyond multimode limits but within the 2km campus or intra-siteSMF plant.
Host FEC is required at the switch port forfull 2km operation — confirm FEC support with your switch vendor before ordering.Compliant with QSFP-DD MSA, IEEE 802.3bs, and 400GAUI-8, with Duplex LC connector,four CWDM4 wavelengths, DDM/DOM monitoring via I2C, DSP-based design, powerconsumption below 10W, and operating temperature 0°C to 70°C.

The MikroTik CRS504-4XQ-IN is a compact 100G switch — Marvell 98DX4310 switch ASIC, QCA9531 management CPU (MIPSBE, 650 MHz), 64 MB RAM, 16 MB FLASH, RouterOS v7 License 5, 4× QSFP28 (100G, breakout-capable to 16× 25G), 1× 10/100 Ethernet (management), RJ45 serial console, 2× AC hot-swap PSU slots (100–240V), 3× DC inputs (DC jack 36–57V + 802.3bt PoE-in 43–57V + 2-pin terminal 36–57V), 2 fans, 41W max / 25W without attachments, PCB temperature monitor, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, K10 screw kit, 2× IEC cord. USD 799.00.

The MikroTik CRS312-4C+8XG-RM is a rackmount switch featuring 8x 10G RJ45 ports, 4 combo 10G SFP+/RJ45 ports, dual power supplies, and robust performance for high-speed networks.

The MikroTik CCR2004-1G-12S+2XS is a 1U rackmount cloud core router — AL32400 quad-core ARM64 at 1,700 MHz, 4 GB ECC RAM, 128 MB NAND flash, RouterOS v7 License 6, 1× GbE + 12× SFP+ 10G + 2× SFP28 25G, RJ45 serial console, dual redundant AC input (100–240V, 2× IEC cords), 60W max / 31W without attachments, 2 fans, IP20, 443 × 224 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Highest single-core performance in the CCR2004 family — up to 3.4 Gbps single IPsec tunnel, strong BGP feed processing. Includes 2× IEC cords, K10 screw and feet kit, rackmount bracket. Free software updates for life of product or minimum 5 years from purchase.