AI Networking & Data Center

The MikroTik CRS310-1G-5S-4S+IN is a 1U rack-mount fibre switch — Marvell 98DX226S dual-core ARM 32bit switch chip at 800 MHz (CPU + switch ASIC combined), 256 MB RAM, 16 MB FLASH, RouterOS v7 / SwitchOS dual boot, License 5, 5× SFP (1G), 4× SFP+ (10G), 1× GbE (direct switch chip connection), RJ45 serial console, 2× DC inputs (DC jack 18–57V + 802.3af/at PoE-in 18–57V), 1 fan, 20W max / 8W without attachments, CPU + PCB + voltage monitors, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-48 fastening set, rack ears, 24V 1.2A adapter. USD 199.00.

The MikroTik CCR2004-1G-2XS-PCIe is a unique PCIe network interface card that embeds a complete, fully licensed RouterOS router directly inside a server. Installed into a standard PCIe slot, it presents itself to the host as a network interface while simultaneously running RouterOS v7 on its own dedicated quad-core ARM64 AL52400 processor running at 1500 MHz with 4 GB of RAM. The card provides 1× Gigabit Ethernet and 2× 25G SFP28 ports, and can operate in two modes: a standard RouterOS mode for full routing, firewall, and VPN functionality, or a Passthrough mode for near-transparent, wire-speed bridging at up to 100 Gbps with Jumbo frames. Supported on Linux hosts and RouterOS hosts, it is aimed for those who want to add powerful router capabilities to an existing server.

The SYNOXX EDQD400-1-PAM4 is a 400G QSFP-DD to QSFP-DD passive direct attach
copper (DAC) cable delivering 400Gbps via 8×50G PAM4 lanes over a 1-metre passive
twinax connection — the same-rack 400G interconnect for QSFP-DD-equipped spine
switches, 400G AI/ML cluster fabric, and high-density HPC environments requiring
cost-effective passive copper at the highest current Ethernet and InfiniBand speed
tier. Compliant with IEEE 802.3cd and InfiniBand HDR standards, featuring a
QSFP-DD interface, I2C management for cable identification, low insertion loss,
low crosstalk, and operation from 0°C to 70°C. Hot-pluggable, RoHS compliant,
and IC Certified.

The SYNOXX 16FMTPOM4-10M is a 16-fibre OM4 multimode MPO-to-MPO Type B (crossover)
plenum trunk cable delivering 10-metre structured cabling runs for parallel optic
systems — supporting 2× simultaneous 100G SR8 connections, 1× 400G SR8 link, or
2× 100G CWDM8 wavelengths in a single 16-fibre run, with an OFNP plenum-rated
jacket for installation in air-handling spaces. Built to ≤0.35dB insertion loss at
850nm and 1300nm, MPO female connectors on both ends with Type B crossover polarity,
OM4 50/125µm multimode glass, operating temperature -10°C to 60°C, and compliant
with TIA-568 and IEC 61754-7. IC Certified for Canada and the US.

The MikroTik DDQ+85MP01D is a QSFP-DD 400G optical transceiver module designed for high-speed fibre connections in ultra-fast network environments such as the CRS812 DDQ and CRS804 DDQ. Using an MTP/MPO connector with 850nm multimode optics, it is ideal for 400G deployments where direct-attach cable (DAC) reach is insufficient. The module features built-in digital diagnostics monitoring — covering optical power, voltage, temperature, and laser bias current — for proactive health monitoring in demanding data centre and core network installations. An MTBF of approximately 200,000 hours at 25°C ensures long-term reliability.

The SYNOXX 16FMTPOM4-5M is a 16-fibre OM4 multimode MPO-to-MPO Type B (crossover)
plenum trunk cable delivering 5-metre within-cabinet and short cross-connect runs for
parallel optic systems — purpose-built for same-cabinet 100G and 400G connections where
3m is too short and 10m creates unnecessary cable bulk, supporting 2× simultaneous 100G
SR8 links, 1× 400G SR8 link, or 2× 100G CWDM8 wavelengths in a single 16-fibre run, with
an OFNP plenum-rated jacket for air-handling space code compliance. Built to ≤0.35dB
insertion loss at 850nm and 1300nm, MPO female connectors on both ends, Type B crossover
polarity, OM4 50/125µm multimode glass, and operating temperature -10°C to 60°C. IC
Certified for Canada and the US.

The MikroTik CRS305-1G-4S+IN is a compact, silent desktop switch with 1 Gigabit Ethernet port, 4 SFP+ 10Gbps ports, dual boot OS, and power redundancy.

The XS+31LC10D is a versatile 1.25G SFP, 10G SFP+, and 25G SFP28 module that's perfect for varied network setups. With extended compatibility, it is a direct upgrade from the previous 10G SFP+ 10 km model, offering more features at the same price.

The MikroTik DDQ+DA0003 is a 400G QSFP-DD passive direct attach copper cable (DAC), 3 metres long — the longer of two DAC options MikroTik offers for the CRS812 and CRS804 400G platforms. With integrated QSFP-DD modules on both ends, it requires no transceivers, no fiber, and no power budget management — simply plug it in and achieve full 400G connectivity between devices across racks. It is the most cost-effective way to connect 400G-capable switches over inter-rack distances in a structured data centre environment.

The SYNOXX EQP85Y-01D is a 100G QSFP28 SR4 optical transceiver delivering 100Gbps 
over multimode fiber using a 4×25G parallel VCSEL array — transmitting and receiving 
across four simultaneous 25G optical lanes via an 8-fiber MPO ribbon connector, 
supporting distances up to 100m on OM3 and OM4 multimode fiber for high-density 
100G data centre switching, 100G parallel breakout deployments, and any 100G 
application requiring MPO-based multimode fiber infrastructure. Compliant with 
QSFP28 MSA and IEEE 802.3bm, featuring integrated Digital Diagnostic Monitoring 
(DDM) for real-time temperature, voltage, TX/RX optical power, and bias current 
monitoring with low power consumption. Hot-pluggable, RoHS compliant, and IC 
Certified.