AI Networking & Data Center

The MikroTik DDQ+DA0003 is a 400G QSFP-DD passive direct attach copper cable (DAC), 3 metres long — the longer of two DAC options MikroTik offers for the CRS812 and CRS804 400G platforms. With integrated QSFP-DD modules on both ends, it requires no transceivers, no fiber, and no power budget management — simply plug it in and achieve full 400G connectivity between devices across racks. It is the most cost-effective way to connect 400G-capable switches over inter-rack distances in a structured data centre environment.

The SYNOXX EQP85Y-01D is a 100G QSFP28 SR4 optical transceiver delivering 100Gbps 
over multimode fiber using a 4×25G parallel VCSEL array — transmitting and receiving 
across four simultaneous 25G optical lanes via an 8-fiber MPO ribbon connector, 
supporting distances up to 100m on OM3 and OM4 multimode fiber for high-density 
100G data centre switching, 100G parallel breakout deployments, and any 100G 
application requiring MPO-based multimode fiber infrastructure. Compliant with 
QSFP28 MSA and IEEE 802.3bm, featuring integrated Digital Diagnostic Monitoring 
(DDM) for real-time temperature, voltage, TX/RX optical power, and bias current 
monitoring with low power consumption. Hot-pluggable, RoHS compliant, and IC 
Certified.

The SYNOXX ESP312X-10D is a 25G SFP28 LR optical transceiver delivering 25.78Gbps 
transmission over single-mode fiber (SMF) up to 10km using a 1310nm DFB laser 
transmitter and PIN receiver — engineered for 25G long-reach data centre 
interconnects, metro-edge telecom links, campus backbone 25G fiber uplinks, and 
5G CPRI fronthaul over extended SMF distances. Features Digital Diagnostic Monitoring 
(DDM) via I2C for real-time temperature, voltage, TX/RX power, and bias current 
monitoring, compliant with SFP28 MSA, IEEE 802.3cc, and SFF-8472 standards, with 
low power consumption and a standard LC duplex connector. Hot-pluggable, RoHS 
compliant, and IC Certified.

The SYNOXX EDQPY-5-26 is a 100G QSFP28 to QSFP28 passive direct attach copper 
(DAC) cable delivering 100Gbps over a 5-metre 26AWG twinax connection — purpose-built 
for extended-rack and cross-row 100G deployments where 1m and 3m cables fall short, 
including end-of-row switch connections, long cable tray runs, and flexible spine-to-leaf 
links requiring extra reach on the passive copper budget. Based on a 4×25G architecture, 
compliant with SFF-8636 and IEEE 802.3bj, with a two-wire I2C interface for monitoring 
and control, low power consumption, and low crosstalk across the full 5m run. 
Hot-pluggable, RoHS compliant, and IC Certified.

The SYNOXX ES-T7-R is a 10GBase-T SFP+ copper transceiver delivering 10Gbps data 
transfers over standard Cat6a or Cat7 twisted-pair cables up to 100 metres — 
eliminating the need for fiber optics in short-to-medium range enterprise and data 
centre deployments. Supports 10G and 1G data rates with a maximum power consumption 
of 2.5W, hot-pluggable SFP+ form factor, and compliance with IEEE 802.3 and SFP+ MSA 
standards. Hot-pluggable, RoHS compliant, and IC Certified for Canada and the US.

The MikroTik XQ+85MP01D is a dual-rate QSFP+/QSFP28 fibre transceiver module supporting both 40 Gigabit and 100 Gigabit operation over multimode fibre. Using an 850 nm wavelength and a 12-fibre 1×12 MTP/MPO connector in an SR4 configuration, it achieves link distances of up to 100 metres — making it well suited for high-density data centre and core switching deployments within a building or campus. It is compatible with MikroTik's 40G/100G QSFP28-equipped switches and routers such as the CCR2216, CRS504, and CRS518, and provides a cost-effective way to add short-reach 40G or 100G multimode fibre connectivity to any supported platform.

25G BiDi SFP28 transceiver, 10KM, LC, SM, DDM, 1270nm Tx / 1330nm Rx, IEEE 802.3cc, RoHS.

The SYNOXX EB232X-10D/EB322X-10D is a matched 25G SFP28 BiDi transceiver pair 
enabling bidirectional 25Gbps transmission over a single strand of single-mode 
fiber (SMF) up to 10km using complementary wavelengths of 1270nm TX/1330nm RX 
and 1330nm TX/1270nm RX. Supports data rates up to 25.78125Gbps with Digital 
Diagnostic Monitoring (DDM), DFB transmitter, APD receiver, and power consumption 
of ≤1.5W per module, compliant with IEEE 802.3cc, SFF-8431, SFF-8432, and 
SFF-8472 standards. Hot-pluggable, RoHS compliant, and IC Certified.

High-performance 100G QSFP28 to 4x SFP28 passive DAC breakout cable designed for data center and high-speed networking applications, featuring low crosstalk, low insertion loss, and excellent signal integrity.

The SYNOXX EDQPY-4SP3 is a 100G QSFP28 to 4×SFP28 passive direct attach copper 
(DAC) breakout cable that splits a single 100G QSFP28 port into four independent 
25G SFP28 connections over 3 metres of twinax copper — enabling cost-effective 
25G server and storage connectivity from a 100G spine or leaf switch port without 
additional transceivers. Compliant with IEEE 802.3bj, SFF-8636, and SFF-8402 
standards, featuring EEPROM support for device identification, low insertion loss, 
and passive operation with no active components required. Hot-pluggable, RoHS 
compliant, and IC Certified.