AI Networking & Data Center

The MikroTik CRS317-1G-16S+RM is a 1U rackmount managed switch built for high-density 10GbE fibre environments, featuring sixteen SFP+ cages and one Gigabit Ethernet port. Powered by the 98DX8216 next-generation switching chip with a dual-core 800 MHz ARM CPU and 1 GB of RAM, it delivers non-blocking Layer 2 wire-speed switching across all 16 SFP+ ports simultaneously. Supporting both RouterOS and SwitchOS via dual boot, it offers the flexibility of a full-featured Layer 3 router or a streamlined managed switch interface. Dual redundant power supplies and passive chassis cooling (supplemented by two fans) ensure reliability in demanding environments. 

The MikroTik CRS320-8P-8B-4S+RM is MikroTik's first 802.3bt PoE++ rackmount switch — 16× Gigabit Ethernet PoE-out ports (Ether1–8: 802.3af/at up to 30W; Ether9–16: 802.3bt up to 90W per port), 1× Gigabit Ethernet management port, 4× SFP+ 10G uplinks, dual-core ARM32 98DX226S at 800 MHz, 256 MB RAM, 32 MB FLASH, dual-boot RouterOS v7 License 5 / SwitchOS, RJ45 serial console, 3-fan active cooling, 600W hot-swap PSU (second PSU slot for 1150W total), 963W total PoE output at full dual-PSU configuration, IP20, -10°C to +50°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes IEC cord, rackmount ears, cable management brackets, K-57 kit. 

The MikroTik CCR2004-16G-2S+ is a powerful 1U rack-mount router built on the Annapurna Labs AL32400 quad-core ARM64 processor running at 1700 MHz with 4 GB of RAM, making it the strongest single-core performer in the CCR2004 series. It provides 16× Gigabit Ethernet ports and 2× 10G SFP+ ports, runs RouterOS v7 with a Level 6 licence, and features dual hot-swap PSU slots accepting 100–240 V AC — giving it full power redundancy for mission-critical deployments. With IPsec hardware acceleration reaching up to 2.6 Gbps and routing throughput of up to 35 Gbps at 1518-byte frames, it is suited to ISPs, enterprise networks, and data centres requiring a high-performance, versatile router at an accessible price point.

The SYNOXX EDQD400-4QPx is a high-speed 400G QSFP-DD to 4x100G QSFP56 breakout DAC cable designed for data centers, high-performance computing, storage networks, switches, routers, and telecom infrastructure. It supports 400Gbps aggregate data rate using PAM4 signaling and is available in short-distance passive copper cable lengths.

The SYNOXX EDQD400-4QPx is a high-speed 400G QSFP-DD to 4x100G QSFP56 breakout DAC cable designed for data centers, high-performance computing, storage networks, switches, routers, and telecom infrastructure. It supports 400Gbps aggregate data rate using PAM4 signaling and is available in short-distance passive copper cable lengths.

The MikroTik CRS309-1G-8S+IN is a compact desktop switch with 8x 10G SFP+ ports, 1 Gigabit Ethernet port, dual boot OS, and advanced network performance.

The SYNOXX EQP29Y-10D is a 100G QSFP28 LR4 optical transceiver delivering 100Gbps 
transmission over single-mode fiber up to 10km using four LAN Wavelength Division 
Multiplexing (LWDM) channels around 1310nm — a standard LC duplex interface 
enabling long-reach 100G data centre interconnects, inter-building campus links, 
and metro-edge telecom connections without MPO ribbon fiber infrastructure. 
Compliant with QSFP28 MSA and IEEE 802.3ba, featuring a CAUI-4 (4×25G) electrical 
host interface, integrated Digital Diagnostic Monitoring (DDM) for real-time 
temperature, voltage, TX/RX power, and bias current monitoring, and low power 
consumption. Hot-pluggable, RoHS compliant, and IC Certified.

100G LR4 10KM Optical Transceiver for MikroTik 100Gbps Hardware.

The MikroTik XQ+31LC02D is a 100 Gigabit QSFP28 optical transceiver module designed for single-mode fibre links of up to 2 kilometres. It uses the CWDM4 (Coarse Wavelength Division Multiplexing) architecture, transmitting across four separate wavelengths — 1271 nm, 1291 nm, 1311 nm, and 1331 nm — over a standard Dual LC UPC connector, making it compatible with widely available OS2 single-mode fibre patch cables. The XQ+31LC02D is well suited for inter-building, campus, or data centre interconnects where DAC cables or short-reach multimode optics cannot cover the required distance, and is compatible with MikroTik's QSFP28-equipped core switches and routers including the CCR2216, CRS504, CRS518, CRS510, and CRS520.

The SYNOXX EQD400-SR8 is a 400G QSFP-DD SR8 hot-pluggable optical transceiverdelivering 400Gbps via 8×50G PAM4 lanes at 850nm over OM4 multimode fiber to 100m(or OM3 to 70m) — the active optical alternative to 400G QSFP-DD DAC cables fordeployments requiring fiber connectivity beyond the passive copper reach class,including long-distance intra-datacenter 400G spine-to-leaf links, cross-row 400Gfabric connections, and InfiniBand HDR infrastructure requiring optical reach.
Compliant with QSFP-DD MSA, CMIS 4.0, IEEE 802.3cm 400GBASE-SR8, and IEEE 802.3bs400GAUI-8, with MPO-16/APC connector, Digital Diagnostic Monitoring (DDM), andpower consumption below 10W. IC Certified for Canada and the US.