MikroTik wAP LTE Kit 2024 CAT4 Outdoor LTE Wi-Fi Router
The MikroTik wAP LTE kit (2024 revision) is a CAT4 outdoor LTE + 2.4 GHz Wi-Fi access point delivering up to 150 Mbps downlink and 50 Mbps uplink — in a tiny IP54-weatherproof enclosure rated from -40°C to +60°C, running RouterOS v7 on License 4. Three power inputs (DC jack, passive PoE-in, automotive plug — all 9–30V), anti-vandal wall mounting, and the newly added Band 28 (700 MHz) for improved rural coverage. Includes 24V adapter, PoE injector, K-52 fastening set, K-50 locking set, wAP mount, ceiling mount bracket, desktop stand, and automotive cable. USD 99.00. MikroTik's own positioning: the best outdoor LTE/Wi-Fi deal on the market for tight budgets — and the 2024 modem refresh makes that claim credible.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MikroTik wAP LTE kit 2024 revision is the most accessible entry point in MikroTik's outdoor LTE product line — a compact, weatherproof, multi-purpose LTE router and Wi-Fi access point at USD 99.00. It is not the highest-performance LTE device in the catalogue — the LHG LTE18 at USD 279.00 delivers CAT18 speeds and 17 dBi directional gain for demanding last-mile deployments. The wAP LTE kit 2024 occupies a different position: small, versatile, budget-grade LTE connectivity for outdoor locations where total simplicity and low cost are the primary requirements, and where a full-size high-gain antenna system is neither necessary nor practical.
The 2024 revision's headline change is the modem upgrade. The new EC200A-EU modem brings improved LTE connectivity over the previous revision and adds Band 28 (700 MHz) to the supported LTE FDD band list. Band 28 is a critical addition for rural coverage — it is one of the primary low-band LTE frequencies used by carriers for extended rural reach in many markets. The 2024 revision also brings a significant price reduction from the previous generation, making it the most price-competitive outdoor LTE kit in the MikroTik line-up.
LTE CAT4 supports download speeds up to 150 Mbps and upload speeds up to 50 Mbps — a meaningful throughput tier for small offices, home outdoor access points, garden buildings, porch installations, vehicles, and any location requiring basic internet connectivity without a high-performance last-mile solution. The supported LTE FDD bands — 1 (2100 MHz), 3 (1800 MHz), 5 (850 MHz), 7 (2600 MHz), 8 (900 MHz), 20 (800 MHz), and 28 (700 MHz) — cover the primary LTE frequency deployments across European and many international markets. LTE TDD bands 38 (2600 MHz), 40 (2300 MHz), and 41n (2500 MHz) extend coverage to TDD-LTE markets. 3G fallback provides Category R7 connectivity (21 Mbps downlink, 5.76 Mbps uplink) on bands 1, 5, and 8, with 2G Class12 fallback on bands 3 and 8 — ensuring connectivity continuity at sites where LTE signal is temporarily unavailable or absent.
The three independent power inputs are the standout deployment flexibility feature. The DC jack (9–30V), passive PoE-in (9–30V), and automotive plug (9–30V) cover virtually every power scenario:
- **DC jack:** Standard wall adapter, solar charge controller, or battery supply
- **Passive PoE-in:** Powered from the included PoE injector or any passive PoE source — single cable from indoors carries both power and data
- **Automotive plug:** Powers directly from a vehicle's 12V or 24V electrical system via the included 0.35m 4-pin automotive adapter cable
The automotive input is a genuine differentiator at this price point. The wAP LTE kit can be installed in commercial vehicles, fleet trucks, construction site equipment, caravans, recreational vehicles, and maritime vessels — permanently powered from the vehicle's electrical system, providing LTE internet and 2.4 GHz Wi-Fi connectivity wherever the vehicle travels. The E-MARK certification (confirmed in the spec table) validates the wAP LTE kit for permanent installation in vehicles — E-MARK is the European automotive electronics certification standard.
The physical installation design reflects MikroTik's attention to field deployment realities. The case fastens to any external wall from the inside — meaning the screws and mount hardware are concealed inside the unit and cannot be accessed without opening the case. The bottom section adds an optional anti-vandal screw that requires the owner's specific tool to remove — appropriate for public-facing, outdoor, or unattended installations where tamper resistance is required. The cable exit at the rear of the case routes the Ethernet cable directly through the wall — the wAP mounts flush against the surface with no visible external cabling. MikroTik's framing: "the wAP attracts less attention and blends into any environment."
The 2.4 GHz Wi-Fi radio (802.11b/g/n, Wi-Fi 4, 2-chain, 300 Mbps max, 2 dBi internal antenna) provides local Wi-Fi distribution from the LTE uplink — the wAP LTE kit functions as both an LTE router and a Wi-Fi access point simultaneously. For a garden office, porch installation, or vehicle deployment, this eliminates the need for a separate indoor Wi-Fi access point behind the LTE gateway.
RouterOS v7 on License 4 provides full network management capability — firewall, QoS, VPN, DHCP, scripting, and MQTT — on the gateway device itself. Software updates are included for the life of the product, guaranteed minimum 5 years from purchase. The MiniPCI-e slot provides modem expansion capability — the installed EC200A-EU modem can be replaced with a compatible MiniPCI-e LTE modem for alternative band or technology support, without replacing the entire device.
The included hardware is unusually comprehensive for a USD 99.00 device. The full kit contains: 24V 0.8A power adapter, PoE injector, K-52 fastening set, K-50 locking set, wAP desktop stand, wAP mount, 0.35m 4-pin automotive adapter cable, wAP ceiling mount bracket. Every primary deployment scenario — wall mount, ceiling mount, desktop, vehicle — is covered by included hardware with no additional accessory purchase required.
Key specifications:
- **LTE modem:** EC200A-EU, CAT4 — 150 Mbps downlink, 50 Mbps uplink
- **LTE FDD bands:** 1 (2100 MHz), 3 (1800 MHz), 5 (850 MHz), 7 (2600 MHz), 8 (900 MHz), 20 (800 MHz), 28 (700 MHz)
- **LTE TDD bands:** 38 (2600 MHz), 40 (2300 MHz), 41n (2500 MHz)
- **3G:** Category R7 — 21 Mbps DL / 5.76 Mbps UL — bands 1, 5, 8
- **2G:** Class12 — bands 3 (1800 MHz), 8 (900 MHz)
- **Wi-Fi:** 2.4 GHz 802.11b/g/n, Wi-Fi 4, 2-chain, 300 Mbps max, 2 dBi internal antenna
- **Ethernet:** 1× 10/100 Mbps, passive PoE-in
- **Power inputs:** DC jack 9–30V, passive PoE-in 9–30V, automotive plug 9–30V
- **Max power consumption:** 7W
- **SIM:** 1× Mini SIM slot (SIM not included)
- **MiniPCI-e:** 1× slot (modem installed)
- **CPU:** QCA9531, single-core MIPSBE, 650 MHz
- **RAM:** 64 MB
- **Storage:** 16 MB FLASH
- **OS:** RouterOS v7, License 4
- **IP rating:** IP54
- **Operating temperature:** -40°C to +60°C
- **MTBF:** ~100,000 hours at 25°C
- **Certifications:** CE, E-MARK, EAC, RoHS — no FCC, no IC published
- **Included:** 24V 0.8A power adapter, PoE injector, K-52 fastening set, K-50 locking set, wAP desktop stand, wAP mount, 0.35m 4-pin automotive adapter cable, wAP ceiling mount bracket
- **Product code:** wAPR-2nD&EC200A-EU
- **Suggested price:** USD 99.00
Note: SIM card not included — LTE connectivity requires a Mini SIM from a compatible carrier. The EC200A-EU modem is the EU-market variant — confirm band compatibility with your specific deployment region and carrier before purchase. Band 4 (AWS) is not in the published FDD band list — confirm with your distributor for Canadian carrier compatibility.
- Product code
- wAPR-2nD&EC200A-EU
- Architecture
- MIPSBE
- CPU
- QCA9531
- CPU core count
- 1
- CPU nominal frequency
- 650 MHz
- RouterOS License
- 4
- Operating System
- RouterOS v7
- Size of RAM
- 64 MB
- Storage size
- 16 MB
- Storage type
- FLASH
- MTBF
- Approximately 100'000 hours at 25C
- Tested ambient temperature
- -40°C to 60°C
- Number of DC inputs
- 3 (Automotive, DC jack, PoE-IN)
- DC jack input Voltage
- 9-30 V
- Max Power consumption
- 7W
- Cooling type
- Passive
- PoE in
- Passive PoE
- PoE in input Voltage
- 9-30 V
- 3G Category
- R7 (21Mbps Downlinks, 5.76Mbps Uplink)
- 3G bands
- 5 (850MHz) / 8 (900MHz) / 1 (2100MHz)
- 10/100 Ethernet ports
- 1
- Number of SIM slots
- 1 Modem (Mini SIM)
- Voltage Monitor
- Yes
- PCB temperature monitor
- Yes
- Wireless 2.4 GHz Max data rate
- 300 Mbit/s
- Wireless 2.4 GHz number of chains
- 2
- Wireless 2.4 GHz standards
- 802.11b/g/n
- Antenna gain dBi for 2.4 GHz
- 2
- Wireless 2.4 GHz chip model
- QCA9531
- MiniPCI-e slots
- 1
- Automotive input Voltage
- 9-30 V
- 2G Category
- Class12
- LTE Category
- 4 (150Mbps Downlink, 50Mbps Uplink)
- LTE FDD bands
- 20 (800MHz) / 3 (1800MHz) / 1 (2100MHz) / 7 (2600MHz) / 8 (900 MHz) / 5 (850MHz) / 28 (700MHz)
- LTE TDD bands
- 40 (2300MHz) / 38 (2600MHz) / 41n (2500MHz)
- TAC
- 86314105
- Wireless 2.4 GHz generation
- Wi-Fi 4
- Certification
- CE, E-MARK, EAC, ROHS
- 2G bands
- 8 (900MHz) / 3 (1800MHz)
- IP rating
- 54
General information
All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.
Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.
Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.
Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.
Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.
Remote training sessions and certification exams are not allowed.
MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.
Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.
The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.
Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.
Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.
Certificates will only be valid for three years.
Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.
By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.
Returns:
All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase. All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.