MikroTik S+RJ10 r3 6-Speed 10G RJ45 SFP+ Copper Module
zoom_out_map
chevron_left chevron_right

MikroTik S+RJ10 – 6-Speed 10G RJ45 SFP+ Copper Module (r3, up to 100 m)

6-speed RJ45 module that brings 10M, 100M, 1G, 2.5G, 5G and 10G Ethernet over familiar twisted-pair copper to any MikroTik SFP+ port — no optical fiber required. The current r3 revision is based on the Marvell MV-CUX3610M, draws 1.5 W max, supports 10GBASE-T links up to 100 m over Cat6/7 and jumbo frames on all advertised speeds.

US$65.00 Tax excluded

US$65.00 Tax excluded

Back-Order, Contact us for the ETA
new_releases Back-Order, delivery 2-3 days
US/Canada
We only offer IC Certified products. For international products, contact us.
Please note!
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.

The MikroTik S+RJ10 is a unique 6-speed RJ45 module that opens up a whole world of high-speed connectivity, delivering up to 10 Gbps over regular twisted-pair cables in products that have SFP+ ports. Any MikroTik device with SFP+ ports can be used without installing optical fiber — just plug in the S+RJ10 and your network is ready for 10 Gbps and the next generation of RJ45 hardware.

Six Speeds in One Module

The S+RJ10 supports 10BASE-T, 100BASE-T, 1000BASE-T, 2.5GBASE-T, 5GBASE-T and 10GBASE-T, so it can connect to legacy gear today and to multi-gig and 10G copper equipment tomorrow — all from the same SFP+ port.

Revision r3 – Lower Power, Longer Reach

The current r3 revision (identified by “/r3” at the end of the serial number) is based on the Marvell MV-CUX3610M and brings several improvements over the earlier r2: lower power consumption of 1.5 W max, 10GBASE-T links up to 100 m over Cat6/7 cable, and jumbo frame support on all advertised speeds.

Maximum Supported Cable Length

  • 10M / 100M / 1G / 5G: up to 100 m over Cat5e/6
  • 2.5G: up to 100 m over Cat5e/6 UTP or STP
  • 10G (r3): up to 100 m over Cat6/7
  • 10G (r2): up to 30 m over Cat6/7
  • Same lengths apply S+RJ10 to S+RJ10, S+RJ10 to other brands, and S+RJ10 to a standard Ethernet port

Compatible MikroTik Devices

Designed for MikroTik devices with SFP+ ports, including the CCR1072-1G-8S+, CCR1036 series, CCR1016-12S-1S+, CCR1009 series, CRS317-1G-16S+RM, CRS210-8G-2S+IN, CRS212-1G-10S-1S+IN and CRS326/CSS326 series. For detailed model compatibility, check the MikroTik wiki.

Key Specifications at a Glance:

  • Product Code: S+RJ10
  • Format: SFP+
  • Connector: RJ45
  • Speeds: 10M / 100M / 1G / 2.5G / 5G / 10G
  • Chipset (r3): Marvell MV-CUX3610M
  • Max Power Consumption (r3): 1.5 W
  • 10GBASE-T reach (r3): up to 100 m over Cat6/7
  • Jumbo frames: supported on all advertised speeds (r3)

Important Revision Notice:

Earlier r2 units (serial ending in “/r2”) are based on the Marvell 88X3310P, draw up to 2.7 W, support 10GBASE-T up to 30 m and can only be used in SFP+ ports. If your installation depends on 10G links longer than 30 m, please confirm the revision with us before ordering.

If you would like to test the device, our return period is 7 days. The product must be returned in good condition with all original parts, accessories, and retail packaging. Incomplete or damaged returns may be subject to a restocking fee of up to 30%.

MikroTik
S+RJ10
New
4752224005106
S+RJ10
Product code
S+RJ10
Format
SFP+
Connector
RJ45
Data Rate
10M / 100M / 1G / 2.5G / 5G / 10G
Distance
100m (r3, 10GBASE-T over Cat6/7)
Max Power consumption
1.5 W
Size of RAM
0 KB
Storage size
256 KB
Storage type
FLASH
chipset
Marvell MV-CUX3610M (r3)
Cable Type
Cat5e/6 up to 5G, Cat6/7 for 10G

General information

All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.

Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.

Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.

Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.

Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.

Remote training sessions and certification exams are not allowed.

MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.

Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.

The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.

Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.

Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.

Certificates will only be valid for three years.

Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.

By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.

Returns:

All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase.  All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.

You might also like