MikroTik NetBox 5 ax Wi-Fi 6 Outdoor 5 GHz AP RouterOS
The MikroTik NetBox 5 ax is a compact outdoor Wi-Fi 6 access point delivering up to 1,200 Mbps on the 5 GHz band (802.11ax, 2-chain, 17 dBi directional panel antenna) in a 135 × 135 × 57 mm IP55-rated enclosure rated from -40°C to +70°C — running RouterOS v7 on a dual-core ARM64 IPQ-5010M at 1 GHz with 256 MB RAM. 802.3af/at PoE-in on a single Gigabit Ethernet port, passive cooling, 9W max, WPA3/OWE, CAPsMAN-ready. Includes Gigabit PoE injector, power adapter, and mounting hardware. The correct outdoor Wi-Fi 6 AP for point-to-client fixed wireless delivery, outdoor venue coverage, and any 5 GHz deployment where a directional panel and IP55 weatherproofing are required.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MikroTik NetBox 5 ax is a purpose-built outdoor Wi-Fi 6 access point — not a repurposed indoor AP in a weatherproof shell, but a device designed from the enclosure inward for permanent outdoor deployment. The IP55 rating (complete dust protection, protection against water jets from any direction), -40°C to +70°C operating range, and passive cooling (no fan, no moving parts) combine to produce a device that installs on a wall, pole, or mast and operates continuously through Canadian winter, summer, and everything between — without the maintenance cycles that fan-cooled or inadequately sealed outdoor APs impose.
The 17 dBi directional panel antenna is the defining hardware specification. A standard omnidirectional AP antenna produces 2–5 dBi of gain in all directions — appropriate for indoor 360° coverage. The NetBox 5 ax's 17 dBi directional panel concentrates its radiated energy into a specific direction with significantly higher effective radiated power in that beam. For outdoor fixed wireless delivery — providing Wi-Fi 6 internet access to clients at a defined location, sector, or coverage zone — the 17 dBi directional panel is the correct antenna geometry. It extends usable range beyond what an omni AP achieves at the same transmit power, and it rejects interference from directions outside the beam.
The Wi-Fi 6 (802.11ax) radio on 5 GHz (QCN-5022, 2-chain, 1,200 Mbps max) delivers the OFDMA, MU-MIMO, and BSS colouring improvements that characterise the 802.11ax standard — all relevant in outdoor deployments where multiple clients connect simultaneously and where adjacent-channel interference from neighbouring APs is a real constraint. The 5 GHz-only design is a deliberate choice for this product: 5 GHz provides higher throughput capacity and less interference than 2.4 GHz in most outdoor deployment scenarios where the NetBox 5 ax is the correct tool. Buyers who need 2.4 GHz outdoor coverage should evaluate a different product.
Security is Wi-Fi 6 grade: WPA3-PSK, WPA3-EAP, OWE (Opportunistic Wireless Encryption), and management frame protection. OWE is specifically valuable in outdoor public Wi-Fi deployments — it provides encrypted Wi-Fi sessions for clients connecting to open networks, without requiring a password. For outdoor venue Wi-Fi, public park Wi-Fi, marina Wi-Fi, and campground connectivity where open access is required but client data must still be protected, OWE is the correct security configuration.
CAPsMAN integration (MikroTik's wifi-qcom CAPsMAN) allows any RouterOS device to centrally manage multiple NetBox 5 ax units across a site — SSID policy, security configuration, channel assignment, and roaming policy managed from a single controller rather than configured per-device. For outdoor deployments covering large areas — festival grounds, sports venues, marina docks, campgrounds, outdoor markets, industrial yards — CAPsMAN reduces multi-AP deployment from per-device configuration to controller-level policy, applied simultaneously across all units. Fast roaming (802.11r-compatible) allows client devices to transition between NetBox 5 ax units covering adjacent sectors without re-authentication delays.
Power is delivered via 802.3af/at PoE-in (18–57V) on the single 10/100/1000 Mbps Ethernet port — a single Ethernet cable from the nearest PoE switch or included PoE injector carries both power and data to the mounting point. No separate power run to the pole or wall is required. Maximum power consumption is 9W — low enough that a single PoE port on any 802.3af switch powers the device with headroom to spare. The included Gigabit PoE injector and power adapter provide a complete power solution out of the box. For multi-unit deployments from a central PoE switch, no per-unit injector purchase is required beyond the included unit.
RouterOS v7 on License 4 runs on a dual-core ARM64 IPQ-5010M at 1 GHz with 256 MB RAM and 128 MB NAND — sufficient compute for full RouterOS feature operation including firewall, QoS, VPN, VLAN, scripting, and CAPsMAN client mode. Software updates are included for the life of the product, guaranteed minimum 5 years from purchase. MTBF is ~200,000 hours at 25°C — the highest MTBF tier published in the MikroTik catalogue and consistent with the KNOT LR8G, LHG LTE18, and cAP LTE12 ax.
The physical form factor — 135 × 135 × 57 mm, 415 g — is compact enough for pole, wall, or mast installation without wind loading concerns or heavy mounting hardware. The included fastening set and mounting hardware support standard outdoor installation scenarios.
**Canadian outdoor deployment context:** The NetBox 5 ax's -40°C lower temperature limit matches the most extreme documented winter ambient temperatures in Canadian Prairie and northern communities. The IP55 water jet resistance covers driving rain, pressure washing of adjacent surfaces, and high-humidity coastal environments. The passive cooling design eliminates the fan failure mode that is the primary cause of premature outdoor AP replacement in Canadian conditions — freeze-thaw cycles accelerate fan bearing wear in actively cooled units. For Canadian outdoor Wi-Fi deployments where three-to-five-year unattended operation is the reliability expectation, passive cooling is a material advantage over fan-cooled alternatives.
Key specifications:
- **Wi-Fi:** 802.11a/n/ac/ax, Wi-Fi 6, 5 GHz only, 2-chain, 1,200 Mbps max, QCN-5022
- **Antenna:** 17 dBi integrated directional panel
- **Wi-Fi security:** WPA3-PSK, WPA3-EAP, OWE, management frame protection
- **Ethernet:** 1× 10/100/1000 Mbps, PoE-in
- **PoE-in:** 802.3af/at, 18–57V
- **Max power consumption:** 9W
- **Cooling:** Passive
- **CPU:** IPQ-5010M, dual-core ARM64, 1,000 MHz
- **RAM:** 256 MB
- **Storage:** 128 MB NAND
- **OS:** RouterOS v7, License 4
- **IP rating:** IP55
- **Dimensions:** 135 × 135 × 57 mm
- **Weight:** 415 g
- **Operating temperature:** -40°C to +70°C
- **MTBF:** ~200,000 hours at 25°C
- **Certifications:** CE, EAC, RoHS — no FCC, no IC published
- **Included:** Gigabit PoE injector, power adapter, mounting hardware, fastening set
- **Product code:** NBE-5-axD
Note: 5 GHz only — no 2.4 GHz radio. Clients must support 5 GHz Wi-Fi for association. Confirm IC certification with your MikroTik distributor before listing for the Canadian market.
- Product code
- L11UG-5HaxD-NB
- Architecture
- ARM
- CPU core count
- 2
- CPU nominal frequency
- 800 MHz
- Operating System
- RouterOS v7
- Size of RAM
- 256 MB
- Storage size
- 128 MB
- Storage type
- NAND
- MTBF
- Approximately 200'000 hours at 25C
- Tested ambient temperature
- -40°C to 70°C
- Number of DC inputs
- 1 (PoE-IN)
- Max Power consumption
- 15W
- Max power consumption without attachments
- 6W
- Cooling type
- Passive
- PoE in
- Passive PoE
- PoE in input Voltage
- 18-28 V
- 10/100/1000 Ethernet ports
- 1
- Number of USB ports
- 1
- USB Power Reset
- Yes
- USB slot type
- USB Type A
- Max USB current (A)
- 1.5
- Voltage Monitor
- YES
- PCB temperature monitor
- YES
- Wireless 5 GHz number of chains
- 2
- Wireless 5 GHz standards
- 802.11a/n/ac/ax
- Wireless 5 GHz chip model
- QCN-6102
- Wi-Fi generation
- Wi-Fi 6
- Wireless 5 GHz Max data rate
- 2400 Mbit/s
- Certification
- CE, FCC, IC, EAC, ROHS
- IP rating
- 54
General information
All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.
Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.
Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.
Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.
Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.
Remote training sessions and certification exams are not allowed.
MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.
Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.
The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.
Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.
Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.
Certificates will only be valid for three years.
Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.
By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.
Returns:
All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase. All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.
