MikroTik RBGPOE-CON-HP 48V–24V Gigabit PoE Converter
The MikroTik RBGPOE-CON-HP is a rugged Gigabit PoE voltage converter that steps 48V PoE input (Passive PoE, Telecom PoE, 802.3af, or 802.3at — any 42–57V source) down to 24V Passive PoE output at up to 1A (24W) — powering any 8–30V RouterBOARD device from a 48V PoE infrastructure without a separate power adapter or injector. Two Gigabit Ethernet ports, integrated heatsink in a rugged metallic case, wall-mountable, shielded Ethernet support. The correct solution when your PoE switch delivers 48V and your RouterBOARD device needs 24V.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MikroTik RBGPOE-CON-HP solves a specific and common infrastructure mismatch: enterprise and carrier-grade PoE switches deliver 48V (802.3af/at) or Telecom/Passive 48V — but many MikroTik RouterBOARD devices require 24V Passive PoE input. Without the RBGPOE-CON-HP, this means running a separate power adapter to the RouterBOARD device, which means a separate power run, a separate outlet, and a more complex installation. With the RBGPOE-CON-HP in the cable run, the 48V PoE from the switch powers the converter, and the converter delivers 24V Passive PoE out to the RouterBOARD — one cable from the switch does both data and power for the entire run.
The input compatibility is the breadth of this product's usefulness. The RBGPOE-CON-HP accepts any 42–57V PoE source — 802.3af (15.4W budget), 802.3at/PoE+ (30W budget), Passive 48V, and Telecom 48V DC. This means it works with virtually every enterprise PoE switch on the market today, every MikroTik PoE switch with 48V output, and every Telco-standard 48V DC PoE infrastructure. If the source is 48V and it is on an Ethernet cable, the RBGPOE-CON-HP will take power from it.
The output is 24V Passive PoE at up to 1A — 24W maximum. This covers the power budget of the majority of MikroTik RouterBOARD devices that accept 8–30V Passive PoE input, including compact access points, outdoor CPEs, and embedded RouterBOARD platforms. The Gigabit Ethernet pass-through ensures that data rates are not the bottleneck — 10/100/1000 Mbps is preserved across both ports.
**Important power budget note:** When powered by an 802.3af-compliant PSE (not 802.3at), total output power must not exceed **12.95W** — this is a hard limit imposed by the 802.3af standard's power budget, not by the converter itself. If the RouterBOARD device being powered requires more than 12.95W, the input source must be 802.3at (PoE+) or a Passive/Telecom 48V source with sufficient current capacity.
The rugged metallic case with integrated heatsink handles the thermal demands of continuous DC-DC step-down conversion without fan noise or moving parts. Wall-mounting holes in the case allow permanent fixed installation at the cable termination point — on a wall, inside a cabinet, or on a mounting bracket alongside the powered device. The shielded Ethernet connector design, with shield pins inside the connectors, supports grounded shielded cable through the converter — an important detail for outdoor runs, industrial environments, and any installation where EMI or ground loop protection is required.
Key features:
- Converts 48V PoE input → 24V Passive PoE output — powers 8–30V RouterBOARD devices from any 48V PoE infrastructure
- Universal 48V input — accepts Passive PoE, Telecom PoE, 802.3af, and 802.3at (42–57V input range)
- 24V Passive PoE output — 1A, 24W max (12.95W max when input is 802.3af only)
- 2× 10/100/1000 Mbps Gigabit Ethernet ports — full Gigabit data pass-through
- Rugged metallic case with integrated heatsink — continuous operation, no fan, no moving parts
- Wall-mountable — mounting holes for permanent fixed installation
- Shielded Ethernet support — shield pins inside connectors, grounding at converter or at either end device
- MTBF: ~100,000 hours at 25°C
- Certified CE, RoHS
**Important note:** The RBGPOE-CON-HP is a PoE voltage converter — the input must be a PoE-powered Ethernet cable (42–57V). It does not add PoE to a non-PoE Ethernet source. The output is 24V Passive PoE — compatible with MikroTik RouterBOARD devices rated 8–30V Passive PoE input. Confirm the input voltage range of the target RouterBOARD device before deployment.
- Product code
- RBGPOE-CON-HP
- Tested ambient temperature
- -35C to +70C
- PoE in
- Passive PoE
- PoE out
- 802.3af/at
- Max total out (A)
- 1A
- 10/100/1000 Ethernet ports
- 2
- Input Voltage
- 42-57V (Passive, Telecom, 802.3af and 802.3at PoE plus supported)
- Output Voltage
- 24 V 1 A
- Certification
- CE, ROHS
General information
All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.
Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.
Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.
Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.
Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.
Remote training sessions and certification exams are not allowed.
MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.
Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.
The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.
Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.
Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.
Certificates will only be valid for three years.
Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.
By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.
Returns:
All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase. All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.