Accessories

The MikroTik G1483-0600WNB is a 600W hot-swap replacement or expansion power supply unit designed exclusively for the CRS320-8P-8B-4S+RM PoE++ switch. The CRS320 ships with a single 600W PSU as standard, and includes an expansion slot for a second PSU — adding this unit raises the total combined power output to 1150W, enabling up to 90W per PoE++ port. As a hot-swap unit, it can be installed or replaced without powering down the switch, making it ideal for environments where uptime cannot be compromised.

Pre-terminated Category 6 (Cat6) solid U/UTP cable — 4-pair, 350 MHz, 24 AWG, CMR-rated.

The PW48V-12V150W is a hot-swap -48V DC telecom power supply, designed for seamless replacement in MikroTik devices such as the CCR2216, CRS518, and CRS520. It supports an input voltage range of -36 to -57V, ensuring reliable power delivery for critical network installations without requiring a device restart.

The 12POW150 is a hot-swap 12V 150W AC/DC power supply designed for MikroTik CCR2216 and CRS518 units. It ensures zero downtime by providing seamless replacement without restarting devices.

The MikroTik MTP250-26V94-OD is an outdoor AC/DC power supply unit — 26V DC output, 250W, IP67 (fully dust-tight + immersion rated), designed for the MikroTik netPower outdoor switch product line and 12–30V outdoor access points and devices, pole/wall mount compatible, sturdy sealed enclosure, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. Companion variant: MTP250-53V47-OD (53V 250W for higher-voltage devices such as PTZ cameras). CE, EAC, RoHS certified. No RouterOS — standalone power supply unit. USD 99.00.

The MikroTik MTP250-53V47-OD is an outdoor-rated AC/DC power supply unit designed to provide centralised 53 V power for MikroTik's netPower product line and other outdoor devices requiring higher-voltage DC power. Delivering up to 250 W at 53 V (approximately 4.7 A), it is housed in a rugged IP67-rated enclosure that provides full protection against dust ingress and immersion, making it suitable for demanding pole or wall-mount outdoor installations. It is the higher-voltage companion to the MTP250-26V94-OD (26 V / 250 W), and the appropriate choice for setups such as networks of PTZ security cameras or other outdoor equipment that requires a higher DC supply voltage. Two hose clamps are included for pole mounting. Certifications include CE, EAC, and RoHS.

The MikroTik UP1302C-12 is a 12 V 10.8 A internal replacement power supply unit designed for use in the CCR1036 series routers and the CRS326-24S+2Q+RM switch. It is compatible specifically with r2 revisions of CCR1036 devices — those featuring a screw terminal connector — and provides a direct internal power source for these platforms. It is the appropriate spare or replacement PSU for operators maintaining CCR1036 or CRS326-24S+2Q+RM installations.

The MikroTik GPeRx4 is a compact, IP68-rated outdoor PoE extender that splits a single high-power 802.3bt PoE input into three standard 802.3af/at PoE-out connections. It allows a single high-power PoE port to power multiple devices simultaneously, without the need for additional cabling infrastructure. Managed via SwOS Lite, it supports interface monitoring, VLAN configuration, traffic shaping, SNMP reporting, and fault detection — making it a smart and practical solution for outdoor PoE deployments. Note that the output ports are isolated and communicate only with the input port; this device functions as a PoE extender, not a switch.

The MikroTik CADDY is a 10-pack of replacement NVMe drive tray inserts purpose-built for the MikroTik ROSE Data server (RDS). Each tray provides quick, secure NVMe drive mounting within the RDS chassis — allowing drives to be installed, swapped, or replaced cleanly without improvised mounting solutions. For a pack of 10, the CADDY is the essential on-site spare for any ROSE Data server deployment where NVMe drives are added, replaced, or rotated over the server's operational life.

The MikroTik SR-10U SolidRack 10 is a 19" 10U desktop rack — adjustable angle, aluminium construction, rear multi-plug extension cord attachment point, cable management space, includes screws for 10 devices plus rack mounting hardware. Compatible with all standard 19" rack-mount devices from MikroTik and other vendors. With the optional K-79 accessory kit, fits up to 4× RB5009UG+S+IN routers per 1U (40 RB5009 total). Mount under a desk, on a desk, or on a bench. No electronics, no firmware, no certification required. MTBF ~100,000 hours at 25°C. Suggested price USD 49.00.