MikroTik G1317-0600W – 600W DC-DC Hot-Swap Power Supply for CRS320
600 W hot-swap DC-DC power supply for the MikroTik CRS320-8P-8B-4S+RM PoE++ switch. Accepts 36–72 V DC input (20 A max) and delivers +54.5 V / 11 A plus +12 Vsb / 3 A standby. Run the switch directly from existing DC infrastructure, add a second DC PSU for up to 1,200 W combined, or pair with an AC PSU for AC + DC redundancy.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MikroTik G1317-0600W is a 600 W hot-swap DC-DC power supply designed for the CRS320-8P-8B-4S+RM PoE++ switch. It brings a 54.5 V, 11 A DC power option to the switch’s hot-swap PSU system, making the CRS320 easy to integrate into installations with existing DC power infrastructure — from telecom sites and data rooms to battery-backed and off-grid deployments.
Run the CRS320 from DC Power
Replace the included AC power supply with a G1317-0600W to run the switch directly from your existing DC infrastructure. The power supply accepts a 36–72 V DC input (20 A max) and provides a +54.5 V / 11 A main output together with a +12 Vsb / 3 A standby output.
Choose Your Power Setup
The CRS320-8P-8B-4S+RM supports two hot-swap power supplies in three configurations: AC + AC, DC + DC, or AC + DC. With two DC supplies installed, both PSUs share the load, and the DC source can be an existing DC system, a battery bank or a compatible DC generator. Mixing an AC and a DC supply gives you source redundancy — if AC power fails, the DC supply can keep the switch running.
Up to 1,200 W Combined Power
With two power supplies installed, the CRS320 has up to 1,200 W of combined power capacity — ample headroom for demanding PoE installations powering cameras, access points and other high-draw devices.
Hot-Swap Design
The hot-swap design makes installation and maintenance easier, allowing PSU changes without shutting down the switch when sufficient power remains available from the other supply.
Built for the CRS320-8P-8B-4S+RM
The CRS320-8P-8B-4S+RM is built for demanding PoE installations, combining 8× Gigabit 802.3af/at ports (up to 30 W per port), 8× Gigabit 802.3bt PoE++ ports (up to 90 W per port), 4× 10G SFP+ uplinks and two hot-swap PSU slots. From offices and hotels to security installations and telecom infrastructure, it delivers both data and power over the same Ethernet cables, reducing the need for separate power adapters and injectors.
Key Specifications at a Glance:
- Product Code: G1317-0600W
- Type: Hot-swap DC-DC power supply
- DC Input: 36–72 V, 20 A max
- DC Output: +54.5 V / 11 A (main), +12 Vsb / 3 A (standby)
- DC Output Power: 600 W
- Combined capacity: up to 1,200 W with two PSUs installed
- Supported configurations: AC + AC, DC + DC, AC + DC
- Compatible with: MikroTik CRS320-8P-8B-4S+RM
- Operating Temp: -5°C to +50°C
Important Compatibility Notice:
The G1317-0600W is designed for the MikroTik CRS320-8P-8B-4S+RM. Before purchasing, please confirm your switch model and that your DC power source is within the 36–72 V input range and can supply up to 20 A.
If you would like to test the device, our return period is 7 days. The product must be returned in good condition with all original parts, accessories, and retail packaging. Incomplete or damaged returns may be subject to a restocking fee of up to 30%.
- Product code
- G1317-0600W
- PSU type
- Hot-swap DC-DC
- DC input
- 36-72 V, 20 A max
- DC output voltage
- +54.5 V, +12 Vsb standby
- DC output current
- 11 A (54.5 V), 3 A (12 Vsb)
- Operating Temperature
- -5°C to +50°C
- DC output power
- 600 W
- Redundant supply
- Yes, AC+AC, DC+DC or AC+DC
- Compatible with
- CRS320-8P-8B-4S+RM
General information
All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.
Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.
Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.
Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.
Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.
Remote training sessions and certification exams are not allowed.
MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.
Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.
The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.
Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.
Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.
Certificates will only be valid for three years.
Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.
By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.
Returns:
All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase. All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.
