MikroTik hAP ax2 Wi-Fi 6 AX1800 Dual-Band ROS7 L4
The MikroTik hAP ax² is a powerful dual-band Wi-Fi 6 home access point and router, representing the next generation of the widely popular hAP ac² platform. It delivers AX1800 wireless speeds — up to 1200 Mbps on 5 GHz and 574 Mbps on 2.4 GHz — via a dual-chain 802.11ax radio on each band, powered by a Qualcomm IPQ-6010 quad-core ARM64 CPU running at 864 MHz with 1 GB of RAM. The unit features five Gigabit Ethernet ports, passive PoE-in and PoE-out on Ether 1, runs RouterOS v7 with a Level 4 licence, and supports IPsec hardware encryption. It can be mounted vertically, horizontally, or on the wall using the included accessories, making it an excellent all-in-one solution for home users, small offices, and network enthusiasts.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The hAP ax² (C52iG-5HaxD2HaxD-TC) is MikroTik's Generation 6 successor to the hAP ac², bringing Wi-Fi 6 (802.11ax) to the beloved hAP form factor. Both radio bands have been substantially upgraded: the 5 GHz radio delivers up to 1200 Mbps (up to 40% faster than its predecessor) and the 2.4 GHz radio delivers up to 574 Mbps (up to 90% faster), using a dual-chain configuration on each band with the Qualcomm QCN-5052 (5 GHz) and QCN-5022 (2.4 GHz) chips. Antenna gain is 4.5 dBi on 5 GHz and 4 dBi on 2.4 GHz. The combined rated Wi-Fi speed is AX1800.
At the heart of the hAP ax² is the Qualcomm IPQ-6010 system-on-chip, which serves as both the CPU and the switch chip. The quad-core, quad-thread ARM 64-bit processor runs at 864 MHz and is backed by 1 GB of RAM and 128 MB of NAND flash storage — a significant upgrade in memory over older hAP models. This gives the unit substantial headroom for demanding RouterOS tasks including complex firewall rulesets, IPsec VPN tunnels with hardware acceleration, traffic shaping with multiple queues, and container workloads. IPsec throughput testing shows up to 878 Mbps in a single tunnel using AES-128-CBC + SHA1 at 1400-byte packets. RouterOS v7 is included with a Level 4 licence.
The wired side provides five 10/100/1000 Mbps Gigabit Ethernet ports. Port 1 (Ether 1) supports both passive PoE-in and passive PoE-out — the unit can be powered via PoE from an upstream device, and simultaneously deliver up to 16.8 W / 0.6 A of passive PoE to a connected downstream device such as a MikroTik access point or IP camera. Alternatively, the device can be powered via its DC jack (12–28 V). Passive PoE-in accepts 18–28 V, and the DC jack accepts 12–28 V. Maximum power consumption is 27 W under full load, and just 12 W without attached PoE devices. Cooling is entirely passive.
The unit ships with the hAP case base, K-47 wall mount set, and a 24 V 1.2 A power supply, and supports vertical, horizontal, and wall mounting orientations to suit any installation. A mode button and CPU temperature monitor are included. The device is rated for -40 °C to 50 °C operating temperatures. Certifications include CE, FCC, IC, EAC, and RoHS.
Key Specifications at a Glance
- Product Code: C52iG-5HaxD2HaxD-TC
- Architecture: ARM 64-bit
- CPU: Qualcomm IPQ-6010, Quad-Core @ 864 MHz
- Switch Chip: IPQ-6010
- RouterOS Licence: Level 4
- Operating System: RouterOS v7
- RAM: 1 GB
- Storage: 128 MB NAND
- Wi-Fi Speed: AX1800
- 2.4 GHz Radio: Wi-Fi 6, 802.11b/g/n/ax, 2 chains, up to 574 Mbps, 4 dBi, QCN-5022
- 5 GHz Radio: Wi-Fi 6, 802.11a/n/ac/ax, 2 chains, up to 1200 Mbps, 4.5 dBi, QCN-5052
- Ethernet Ports: 5× 10/100/1000 Mbps
- PoE-out Ports: 1× (Ether 1) — Passive PoE, up to 16.8 W / 0.6 A
- Power Inputs: 2 (DC jack 12–28 V, Passive PoE-in 18–28 V)
- Max Power Consumption: 27 W (12 W without attachments)
- Cooling: Passive
- Operating Temperature: -40 °C to 50 °C
- MTBF: ~100,000 hours at 25 °C
- Certifications: CE, FCC, IC, EAC, RoHS
- Included: hAP case base, K-47 wall mount set, 24 V 1.2 A power supply
- Product code
- C52iG-5HaxD2HaxD-TC
- Architecture
- ARM 64bit
- CPU
- Quad-Core IPQ-6010 864 MHz
- Switch chip model
- IPQ-6010
- Operating System
- RouterOS, License level 4
- Size of RAM
- 1 GB
- Storage size
- 128 MB, NAND
- Number of DC inputs
- 2 (PoE-in, DC jack)
- DC jack input Voltage
- 12-28 V
- PoE in
- 18-28 V
- Wireless AP
- 2.4 GHz 802.11ax dual-chain, 5 GHz 802.11 802.11ax dual-chain
- Dimensions
- 120 x 101 x 37 mm
- Antenna gain dBi for 2.4 GHz
- 4.5 dBi
- Antenna gain dBi for 5 GHz
- 4 dBi
- Operating Temperature
- -40°C to +50°C
- Number of 1G Ethernet ports
- 5
- Number of 1G Ethernet ports with PoE-out
- 1
- Wireless interface model
- QCN-5052
General information
All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.
Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.
Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.
Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.
Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.
Remote training sessions and certification exams are not allowed.
MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.
Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.
The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.
Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.
Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.
Certificates will only be valid for three years.
Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.
By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.
Returns:
All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase. All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.
