List of products by supplier MikroTik

The mAP (micro Access Point) is a compact, dual-chain 2.4GHz wireless access point with two Ethernet ports, PoE-out capability, and full RouterOS features. It is ideal for portable, versatile networking needs.

The MikroTik CCR2004-16G-2S+ is a 1U rack-mount SMB router — Annapurna Labs AL32400 quad-core ARMv8 Cortex-A57 at 1,700 MHz, Marvell 88E6191X switch chip (two groups of 8× GbE each on a dedicated 10 Gbps full-duplex line to CPU), 4 GB DDR4 RAM, 128 MB NAND, RouterOS v7 License 6, 16× GbE + 2× SFP+ 10G, RJ45 serial console, USB, dual redundant AC PSU (100–240V, 50–60 Hz), 2 fans, 48W max / 35W without attachments, CPU + PCB + voltage monitors, 443 × 210 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS. Includes rack ears, 2× IEC cord, K-57 kit. USD 465.00.

The MikroTik RB5009UG+S+IN is a compact quad-core desktop router — Marvell Armada 88F7040 ARMv8 at 350–1,400 MHz (auto), Marvell Amethyst 88E6393 switch chip, 1 GB DDR4 RAM, 1 GB NAND storage, RouterOS v7 License 5, 7× GbE + 1× 2.5G Ethernet + 1× SFP+ 10G (all connected to switch chip via 10 Gbps full-duplex line to CPU), USB 3.0 type A (1.5A), 3× power inputs (PoE-in 802.3af/at, DC jack 24–57V, 2-pin terminal 24–57V), passive cooling (case as heatsink), CPU temperature monitor, 220 × 125 × 22 mm, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-55 screw kit + 24V 1.5A power adapter. USD 219.00.

The K-65 rackmount ears are designed specifically for the RB4011 series, enabling seamless installation of units in standard rack setups.

The MikroTik MTP250-26V94-OD is an outdoor AC/DC power supply unit — 26V DC output, 250W, IP67 (fully dust-tight + immersion rated), designed for the MikroTik netPower outdoor switch product line and 12–30V outdoor access points and devices, pole/wall mount compatible, sturdy sealed enclosure, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. Companion variant: MTP250-53V47-OD (53V 250W for higher-voltage devices such as PTZ cameras). CE, EAC, RoHS certified. No RouterOS — standalone power supply unit. USD 99.00.

The MikroTik K-79 is a rackmount bracket kit for RB5009UG+S+IN and L009UiGS-2HaxD-IN routers — mounts up to 4× RB5009 or L009 devices side-by-side in a single standard 1U rack space. Compatible with any standard 19" rack or the MikroTik SR-10U desktop rack (40 RB5009 total in 10U). Passive mechanical bracket — no electronics, no firmware, no certification required. MTBF ~100,000 hours at 25°C. Includes all hardware needed for installation. USD 7.00.

The MikroTik CCR2116-12G-4S+ is a 1U rack-mount ISP edge router — Amazon Annapurna Labs AL73400 16-core ARM64 at 2,000 MHz, Marvell Aldrin 98DX3255 switch chip (L3 hardware offloading, 4× 10G CPU lines), 16 GB DDR4 RAM, 128 MB NAND, 1× M.2 PCIe slot, RouterOS v7 License 6, 12× GbE (switch chip) + 1× GbE (direct CPU management), 4× SFP+ (10G), RJ45 serial console, 2× AC PSU (100–240V, 47–63 Hz), 4 fans, 83W max / 60W without attachments, CPU + PCB + voltage monitors, mode button, 443 × 199 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 2× IEC cord, rack bracket, K-57 kit. USD 995.00.

The MikroTik CCR2216-1G-12XS-2XQ is MikroTik's flagship cloud core router — Amazon Annapurna Labs AL73400 16-core ARM64 at 2,000 MHz, Marvell Prestera Aldrin2 98DX8525 switch chip (L3 hardware offloading, 4× 25G CPU lines), 16 GB DDR4 RAM, 128 MB NAND, 2× M.2 SATA slots, RouterOS v7 License 6, 12× SFP28 (25G), 2× QSFP28 (100G), 1× GbE, RJ45 serial console, 2× hot-swap AC PSU (100–240V, 50–60 Hz), 4× hot-swap fans, 128W max / 80W without attachments, CPU + PCB + voltage monitors, IP20, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 2× IEC cord, rack ears, cable management brackets, K-82 fastening set. USD 2,795.00.

The MikroTik UP1302C-12 is a 130W open frame internal AC/DC power supply — 90–264V AC input, 12V DC 10.8A output, 130W, 55 × 106 × 34 mm. Replacement and redundant PSU for CRS326-24S+2Q+RM, CCR2116-12G-4S+, CCR1036-12G-4S r2, CCR1036-12G-4S-EM r2, CCR1036-8G-2S+ r2, and CCR1036-8G-2S+EM r2. Compatible only with r2 revisions of the CCR1036 series — original revisions use a different PSU format. MTBF approximately 100,000 hours at 25°C. EAN 0708747438888. UP1302C-12-Kit variant includes C14 plug socket with locking power cord clip and wire harness.

The MikroTik CCR2004-1G-2XS-PCIe is a PCIe network interface card with a full RouterOS v7 router on-card — Amazon Annapurna Labs AL52400 quad-core ARM64 at 1,500 MHz, 4 GB DDR4 RAM, 128 MB NAND, RouterOS v7 License 6, 2× SFP28 (25G), 1× GbE (management), 4 virtual PCIe Ethernet interfaces (2× passthrough to SFP28 + 2× bridged to GbE), wire-speed 100 Gbps with jumbo frames, 1 fan, 29W max / 22W without attachments, CPU + PCB + voltage + current monitors, IP20, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes small and large brackets. USD 199.00.