MikroTik mAP lite 2.4GHz Dual-Chain Micro AP PoE Travel Router
The MikroTik mAP lite (RBmAPL-2nD) is MikroTik's smallest wireless access point — barely larger than a matchbox at just 48 × 49 × 11 mm — yet it runs the full MikroTik RouterOS feature set on a dual-chain 2.4GHz 802.11b/g/n (Wi-Fi 4) radio. Designed for portability and versatility, it can be powered via microUSB (5 V) or 802.3af/at PoE, consumes just 3.5 W, and is equally at home as a travel router, a hotel room Wi-Fi extender, a server configuration tool, or a discreet permanent access point installation. Running RouterOS with a QCA9533 processor at 650 MHz and 64 MB of RAM, the mAP lite delivers full networking capability in the smallest possible package — ideal for technicians, travellers, and network professionals who need RouterOS in their pocket.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MikroTik mAP lite takes the concept of the micro access point to its logical extreme. It is the smallest device in MikroTik's wireless lineup — a form factor so compact that MikroTik notes they had to design a special mini case just to house it. Despite this, it ships with the complete RouterOS operating system and all the networking capabilities that entails, making it far more than just a basic Wi-Fi repeater or consumer travel router.
Wireless Performance
The mAP lite uses the QCA9533 chip to deliver dual-chain 2.4GHz 802.11b/g/n (Wi-Fi 4) wireless with a maximum data rate of 300 Mbit/s and an integrated antenna with 1.5 dBi of gain. Receive sensitivity spans from -96 dBm at 1 Mbit/s to -71 dBm at MCS7, providing reliable connectivity for typical indoor short-range applications. The dual-chain design improves throughput and link stability compared to single-chain devices of similar size.
Processing & Storage
The unit is powered by a QCA9533 processor running at 650 MHz on the MIPSBE architecture, with 64 MB of RAM and 16 MB of FLASH storage. RouterOS is pre-installed and licensed — no additional software purchase is required. Despite the tiny hardware footprint, the full RouterOS feature set is available, including routing, bridging, firewall, QoS, VPN, hotspot, and wireless management, all configurable via WinBox, WebFig, or CLI.
Ethernet & Powering
A single 10/100 Fast Ethernet port handles data and PoE input. The mAP lite supports two power input methods: 802.3af/at PoE via the Ethernet port (10–60 V) and a microUSB port (5 V), making it compatible with standard phone chargers, power banks, and laptop USB ports — ideal for travel use. Maximum power consumption is an exceptionally low 3.5 W. Passive cooling keeps the unit completely silent.
Build & Form Factor
At just 48 × 49 × 11 mm, the mAP lite is one of the most discreet networking devices available. It is rated IP20 for indoor use with a tested operating temperature range of -30°C to 70°C. MTBF is approximately 100,000 hours at 25°C. The package includes a 5V 1A power adapter and a K-44 mount kit.
Use Cases
The mAP lite is described by MikroTik as ideal for use as a travel router to extend hotel internet to all your devices, or as a configuration tool for servers when no Ethernet is available on a laptop. It is equally well suited for permanent discreet access point installations, IoT network gateways, in-vehicle Wi-Fi, or any scenario where the smallest possible RouterOS-capable wireless device is needed.
Key Specifications at a Glance
- Product Code: RBmAPL-2nD
- Wireless Standard: 802.11b/g/n (Wi-Fi 4), 2.4GHz dual-chain
- Max Wireless Data Rate: 300 Mbit/s
- Antenna Gain: 1.5 dBi (integrated)
- Ethernet Ports: 1x 10/100 Fast Ethernet (PoE-In)
- PoE Input: 802.3af/at, 10–60 V (Ethernet); microUSB 5 V
- CPU: QCA9533, 650 MHz, MIPSBE architecture
- RAM: 64 MB
- Storage: 16 MB FLASH
- Operating System: RouterOS (pre-installed and licensed)
- Max Power Consumption: 3.5 W
- Weather Rating: IP20 (indoor)
- Operating Temperature: -30°C to 70°C
- Dimensions: 48 × 49 × 11 mm
- Cooling: Passive
- MTBF: ~100,000 hours at 25°C
- Certifications: CE, FCC, IC, EAC, RoHS
- Included: 5V 1A power adapter, K-44 mount kit
- Product code
- RBmAPL-2nD
- Architecture
- MIPSBE
- CPU
- QCA9533
- CPU core count
- 1
- CPU nominal frequency
- 650 MHz
- Operating System
- RouterOS
- Size of RAM
- 64 MB
- Storage size
- 16 MB
- Storage type
- FLASH
- Tested ambient temperature
- -30 + 70 C
- Number of DC inputs
- 2 (PoE-IN, MicroUSB)
- Max Power consumption
- 3.5
- Max power consumption without attachments
- 3.5W
- PoE in
- 802.3af/at
- PoE in input Voltage
- 10-60 V
- 10/100 Ethernet ports
- 1
- Dimensions
- 48x49x11mm
- Wireless 2.4 GHz number of chains
- 2
- Wireless 2.4 GHz standards
- 802.11b/g/n
- Antenna gain dBi for 2.4 GHz
- 1.5
- Wireless 2.4 GHz chip model
- QCA9533
- MicroUSB input Voltage
- 5-5 V
General information
All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.
Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.
Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.
Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.
Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.
Remote training sessions and certification exams are not allowed.
MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.
Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.
The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.
Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.
Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.
Certificates will only be valid for three years.
Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.
By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.
Returns:
All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase. All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.
