MikroTik SXTsq Lite2 2.4GHz 10dBi Compact Outdoor CPE
The MikroTik SXTsq Lite2 (RBSXTsq2nD) is a compact, lightweight, and cost-effective 2.4GHz outdoor wireless unit designed primarily for CPE and backbone applications. Featuring a dual-chain 10 dBi integrated antenna with an updated design compared to its predecessor, it supports 802.11b/g/n (Wi-Fi 4) with a maximum data rate of 300 Mbit/s. IP54-rated and powered via passive PoE, the SXTsq Lite2 is an accessible entry-level outdoor wireless solution running MikroTik RouterOS — well suited for WISPs deploying affordable CPE units at customer sites or for short-range wireless backbone links.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MikroTik SXTsq Lite2 is the 2.4GHz member of the SXTsq Lite compact outdoor wireless family. Building on the antenna performance of its predecessor (the SXT Lite2), the SXTsq Lite2 introduces an improved antenna design while retaining the 10 dBi gain that made the original popular — all in a square, low-profile housing that is easy to mount and discreet in appearance.
Wireless Performance
The SXTsq Lite2 uses the QCA9533 wireless chip to deliver dual-chain 2.4GHz 802.11b/g/n (Wi-Fi 4) wireless connectivity with a maximum data rate of 300 Mbit/s. The integrated 10 dBi antenna provides a focused beam pattern suited for point-to-point CPE links and backbone connections at moderate distances. Receive sensitivity ranges from -100 dBm at 1 Mbit/s through to -75 dBm at MCS7, supporting reliable connectivity even in challenging signal environments.
Processing & Storage
The unit is powered by a QCA9533 processor running at 650 MHz on the MIPSBE architecture, with 64 MB of RAM and 16 MB of FLASH storage. RouterOS comes pre-installed and licensed — no additional software purchase is necessary. RouterOS provides a comprehensive networking feature set including routing, bridging, firewall, QoS, VPN, and wireless management, all accessible via WinBox, WebFig, or CLI.
Ethernet & Powering
A single 10/100 Fast Ethernet port handles both data and power input. The SXTsq Lite2 is powered via passive PoE, accepting 10–30 V, with a maximum power consumption of just 5 W — making it highly efficient and suitable for installations with limited power budgets. Passive cooling ensures silent, maintenance-free operation.
Build & Installation
The SXTsq Lite2 is housed in a compact square enclosure measuring 129 × 129 × 34 mm, rated IP54 for outdoor use and tested across an ambient temperature range of -40°C to 70°C. MTBF is rated at approximately 100,000 hours at 25°C. The package includes a 24V 0.38A power adapter, a metal mounting ring, and a PoE injector for straightforward pole or wall mounting.
Use Cases
The SXTsq Lite2 is an ideal choice for WISPs looking for an affordable, reliable 2.4GHz CPE to deploy at customer premises, as well as for short-range point-to-point wireless backbone links where cost-efficiency is a priority. Its compact form factor and low power consumption also make it a practical option for remote or solar-powered installations.
Key Specifications at a Glance
- Product Code: RBSXTsq2nD
- Wireless Standard: 802.11b/g/n (Wi-Fi 4), 2.4GHz dual-chain
- Max Wireless Data Rate: 300 Mbit/s
- Antenna: Integrated 10 dBi
- Ethernet Ports: 1x 10/100 Fast Ethernet (PoE-In)
- PoE Input: Passive PoE, 10–30 V
- CPU: QCA9533, 650 MHz, MIPSBE architecture
- RAM: 64 MB
- Storage: 16 MB FLASH
- Operating System: RouterOS (pre-installed and licensed)
- Max Power Consumption: 5 W
- Weather Rating: IP54
- Operating Temperature: -40°C to 70°C
- Dimensions: 129 × 129 × 34 mm
- Cooling: Passive
- MTBF: ~100,000 hours at 25°C
- Certifications: CE, FCC, IC, EAC, RoHS
- Included: 24V 0.38A power adapter, metal ring, PoE injector
- Product code
- RBSXTsq2nD
- Architecture
- MIPSBE
- CPU core count
- 1
- CPU nominal frequency
- 650 MHz
- Operating System
- RouterOS
- Size of RAM
- 64 MB
- Storage size
- 16 MB
- Storage type
- FLASH
- Tested ambient temperature
- -40°C .. +70°C
- Number of DC inputs
- 1 (PoE-IN)
- Max Power consumption
- 5
- Max power consumption without attachments
- 5W
- PoE in
- Passive PoE
- PoE in input Voltage
- 10-30 V
- 10/100 Ethernet ports
- 1
- Dimensions
- 129 x 129 x 34 mm
- Wireless 2.4 GHz number of chains
- 2
- Wireless 2.4 GHz standards
- 802.11b/g/n
- Antenna gain dBi for 2.4 GHz
- 10
- Wireless 2.4 GHz chip model
- QCA9533
General information
All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.
Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.
Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.
Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.
Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.
Remote training sessions and certification exams are not allowed.
MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.
Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.
The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.
Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.
Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.
Certificates will only be valid for three years.
Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.
By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.
Returns:
All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase. All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.
