SFP/QSFP

The MikroTik XS+85LC01D is a cost-effective multimode SFP/SFP+/SFP28 transceiver module supporting 1.25G, 10G, and 25G data rates over distances of up to 100 metres via a Dual LC UPC connector. Operating at 850 nm wavelength, it is compatible with a wide range of MikroTik devices including the RB5009, CCR2116, netPower series, and various CRS and CSS switches. Built-in digital diagnostics provide real-time monitoring of key transceiver parameters to assist with network health visibility and proactive maintenance planning.

The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.

The MikroTik XQ+DA0003 is a 3-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. It is designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices such as the CCR2216, CRS504, CRS518, CRS510, and CRS520, offering a latency-free, plug-and-play alternative to optical transceivers and fibre patch cables for rack-to-rack or within-cabinet connections. The 3-metre length provides enough reach to comfortably span adjacent rack units or nearby racks while keeping cable management tidy and installations clean.

The S+85DLC03D is a 10G SFP+ transceiver designed for 300-meter Multi Mode fiber connections. It features an LC connector and is compatible with a wide range of MikroTik and non-MikroTik SFP+ devices.

The S+AO0005 is a 5-meter SFP+ Active Optics direct attach cable that supports 10Gbps connectivity. It provides a cost-effective solution for connecting two SFP/SFP+ devices within or across adjacent racks.

The MikroTik XQ+DA0001 is a 1-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. Designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices — including the CCR2216, CRS504, CRS518, CRS510, and CRS520 — it offers a plug-and-play, zero-latency alternative to fibre transceivers and patch cables for within-cabinet or same-rack connections. The 1-metre length is the ideal choice for connecting devices installed in adjacent rack units or a tightly grouped cabinet stack.

The XS+DA0003 is a 3-meter direct attach cable supporting SFP 1G, SFP+ 10G, and SFP28 25G standards. It provides an affordable, low-latency solution for connecting devices within or across adjacent racks for high-speed networking.

The S-RJ01 is an RJ45 SFP module supporting 10/100/1000M speeds for copper Ethernet connections. Compatible with most Gigabit SFP ports, it offers seamless integration with various networking devices.

The MikroTik XS+DA0001 is a 1-metre tri-rate Direct Attach Cable (DAC) that supports 1G SFP, 10G SFP+, and 25G SFP28 interfaces in a single cable — offering greater flexibility and value compared to single-rate DAC alternatives. It provides a low-cost, low-power, and low-latency copper interconnect solution for short-distance connections within a rack or between adjacent racks. Fully compliant with SFP+ MSA specifications and supporting 25-Gigabit Ethernet and Fibre Channel standards, it is an ideal choice for high-density data centre and server room cabling where SFP, SFP+, or SFP28 ports need to be directly connected. A 3-metre version is also available as the XS+DA0003.

The S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, designed for Single Mode fiber connections up to 20 km. It features DDM support and compatibility with a wide range of MikroTik and non-MikroTik devices.