AI Networking & Data Center

The MikroTik CRS804 DDQ (CRS804-4DDQ-hRM) is a compact 1U 400G switch built for AI clusters, storage fabrics, and high-speed aggregation. It features four 400G QSFP56-DD ports with flexible breakout down to 1G, dual 1G/10G Ethernet, a Marvell 98DX7335 switch chip, quad-core 2 GHz ARM CPU, 4 GB DDR4 RAM, dual hot-swap redundant power supplies, and two hot-swap cooling fans — all at 123W max power consumption. Runs RouterOS v7 with License Level 6.

The MikroTik CRS812 DDQ (CRS812-8DS-2DQ-2DDQ-RM) is a high-performance 1U rackmount aggregation switch that brings 50G, 200G, and 400G connectivity to data centres, campus cores, and service provider networks at an accessible price point. Powered by a Marvell 98DX7335 switch chip and a quad-core 2 GHz ARM64 CPU with 4 GB of RAM, it features eight 50G SFP56 ports, two 200G QSFP56 ports, two 400G QSFP56-DD ports, and two 1G/10G Ethernet ports — with full QSFP56/QSFP-DD breakout support down to 1G/2.5G/5G/10G/25G/50G. Equipped with dual hot-swap redundant power supplies, four hot-swap cooling fans, and RouterOS v7, the CRS812 DDQ is designed for top-of-rack, leaf, and aggregation roles in modern high-speed network environments.

The MikroTik CCR2116-12G-4S+ is a 1U rack-mount ISP edge router — Amazon Annapurna Labs AL73400 16-core ARM64 at 2,000 MHz, Marvell Aldrin 98DX3255 switch chip (L3 hardware offloading, 4× 10G CPU lines), 16 GB DDR4 RAM, 128 MB NAND, 1× M.2 PCIe slot, RouterOS v7 License 6, 12× GbE (switch chip) + 1× GbE (direct CPU management), 4× SFP+ (10G), RJ45 serial console, 2× AC PSU (100–240V, 47–63 Hz), 4 fans, 83W max / 60W without attachments, CPU + PCB + voltage monitors, mode button, 443 × 199 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 2× IEC cord, rack bracket, K-57 kit. USD 995.00.

The MikroTik CRS504-4XQ-IN is a compact 100G switch — Marvell 98DX4310 switch ASIC, QCA9531 management CPU (MIPSBE, 650 MHz), 64 MB RAM, 16 MB FLASH, RouterOS v7 License 5, 4× QSFP28 (100G, breakout-capable to 16× 25G), 1× 10/100 Ethernet (management), RJ45 serial console, 2× AC hot-swap PSU slots (100–240V), 3× DC inputs (DC jack 36–57V + 802.3bt PoE-in 43–57V + 2-pin terminal 36–57V), 2 fans, 41W max / 25W without attachments, PCB temperature monitor, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, K10 screw kit, 2× IEC cord. USD 799.00.

Multi-rate SFP/SFP+/SFP28 optical module for long-distance single-mode fiber links. Supports 1.25G, 10G and 25G in one module, reaches up to 40 km at 1310 nm over a Dual LC UPC connector, and includes DDM digital diagnostics for monitoring optical power, voltage, temperature and laser bias current.

The XS+31LC20D is a versatile 1.25G SFP, 10G SFP+, and 25G SFP28 module that's perfect for varied network setups. With extended compatibility, it is a direct upgrade from the previous 10G SFP+ 20 km model, offering more features at the same price.

A pair of industrial-grade 10G SFP+ BiDi modules for single-mode links up to 10 km over a single fiber strand. By transmitting and receiving on split wavelengths (1270/1330 nm), the pair delivers efficient long-distance connectivity while halving fiber requirements. Built-in DDM monitors optical power, voltage, temperature, and laser bias current in real time.

The MikroTik G1382-0350WNA is an optional -48V DC hot-swappable power supply for the CRS804 DDQ switch. It enables the switch to draw power directly from standard -48V DC telecom infrastructure, adding flexible power input options alongside the default AC module. It can be installed or replaced while the device is running, providing additional redundancy and operational flexibility for carrier-grade, remote site, and DC-powered deployments.

The MikroTik G1394-0350WNA is a 12VDC 27.5A 350W hot-swappable replacement power supply designed exclusively for the CRS804 DDQ switch. It allows a failed or degraded power module to be replaced without shutting down the switch, restoring full power redundancy instantly. Built for data centres, enterprise racks, and labs where uninterrupted operation is non-negotiable.

The MikroTik G1251-0150WNA is a 150W hot-swappable replacement power supply designed for the CRS812 DDQ. It delivers 12V DC at 12.5A and can be replaced while the switch is running, helping maintain network uptime without restarting the device.