400G & 200G AI Networking

The SYNOXX EQD400-LR4 is a 400G QSFP-DD LR4 hot-pluggable optical transceiverdelivering 400Gbps via 4×100G PAM4 WDM lanes at 1310nm over single-mode fiber(SMF) to 10km — the long-reach member of the SYNOXX 400G QSFP-DD transceiverfamily for data centre interconnect (DCI),
campus backbone links, ISP aggregation,and any 400G Ethernet deployment requiring optical reach well beyond the 100m OM4ceiling of SR8 transceivers and the 3m passive copper limit of QSFP-DD DAC cables.Compliant with QSFP-DD MSA, IEEE 802.3bs, and 400GAUI-8, featuring a Duplex LCconnector, DDM/DOM monitoring (temperature, voltage, bias current, Tx/Rx opticalpower), power consumption below 10W, and operating temperature 0°C to 70°C.IC Certified for Canada and the US.

The SYNOXX EQD400-FR4 is a 400G QSFP-DD FR4 hot-pluggable optical transceiverdelivering 400Gbps via 4 CWDM optical channels using PAM4modulation over single-mode fiber to 2km — the campus edge and metro accessmember of the SYNOXX 400G QSFP-DD optical family, positioned between the EQD400-SR8and the EQD400-LR4 for deployments requiring400G optical reach beyond multimode limits but within the 2km campus or intra-siteSMF plant.
Host FEC is required at the switch port forfull 2km operation — confirm FEC support with your switch vendor before ordering.Compliant with QSFP-DD MSA, IEEE 802.3bs, and 400GAUI-8, with Duplex LC connector,four CWDM4 wavelengths, DDM/DOM monitoring via I2C, DSP-based design, powerconsumption below 10W, and operating temperature 0°C to 70°C.

The SYNOXX EDQD400-4QPx is a high-speed 400G QSFP-DD to 4x100G QSFP56 breakout DAC cable designed for data centers, high-performance computing, storage networks, switches, routers, and telecom infrastructure. It supports 400Gbps aggregate data rate using PAM4 signaling and is available in short-distance passive copper cable lengths.

The SYNOXX EDQD400-4QPx is a high-speed 400G QSFP-DD to 4x100G QSFP56 breakout DAC cable designed for data centers, high-performance computing, storage networks, switches, routers, and telecom infrastructure. It supports 400Gbps aggregate data rate using PAM4 signaling and is available in short-distance passive copper cable lengths.

The SYNOXX EQD400-SR8 is a 400G QSFP-DD SR8 hot-pluggable optical transceiverdelivering 400Gbps via 8×50G PAM4 lanes at 850nm over OM4 multimode fiber to 100m(or OM3 to 70m) — the active optical alternative to 400G QSFP-DD DAC cables fordeployments requiring fiber connectivity beyond the passive copper reach class,including long-distance intra-datacenter 400G spine-to-leaf links, cross-row 400Gfabric connections, and InfiniBand HDR infrastructure requiring optical reach.
Compliant with QSFP-DD MSA, CMIS 4.0, IEEE 802.3cm 400GBASE-SR8, and IEEE 802.3bs400GAUI-8, with MPO-16/APC connector, Digital Diagnostic Monitoring (DDM), andpower consumption below 10W. IC Certified for Canada and the US.

The SYNOXX EDQD400-3-PAM4 is a 400G QSFP-DD to QSFP-DD passive direct attach
copper (DAC) cable delivering 400Gbps via 8×50G PAM4 lanes over a 3-metre passive
twinax connection — purpose-built for adjacent-rack 400G deployments where 1-metre
cables cannot bridge the distance, including cross-rack spine-to-leaf 400G links,
InfiniBand HDR GPU cluster connections spanning neighbouring racks, and 400G
AI/ML fabric interconnects requiring passive copper economics beyond the same-rack
reach class. Compliant with IEEE 802.3cd and InfiniBand HDR standards, featuring
a QSFP-DD interface, I2C management for cable identification, low insertion loss,
and low crosstalk across the full 3m run. Hot-pluggable, RoHS compliant, and
IC Certified.

The SYNOXX EDQD400-1-PAM4 is a 400G QSFP-DD to QSFP-DD passive direct attach
copper (DAC) cable delivering 400Gbps via 8×50G PAM4 lanes over a 1-metre passive
twinax connection — the same-rack 400G interconnect for QSFP-DD-equipped spine
switches, 400G AI/ML cluster fabric, and high-density HPC environments requiring
cost-effective passive copper at the highest current Ethernet and InfiniBand speed
tier. Compliant with IEEE 802.3cd and InfiniBand HDR standards, featuring a
QSFP-DD interface, I2C management for cable identification, low insertion loss,
low crosstalk, and operation from 0°C to 70°C. Hot-pluggable, RoHS compliant,
and IC Certified.

The SYNOXX 16FMTPOM4-10M is a 16-fibre OM4 multimode MPO-to-MPO Type B (crossover)
plenum trunk cable delivering 10-metre structured cabling runs for parallel optic
systems — supporting 2× simultaneous 100G SR8 connections, 1× 400G SR8 link, or
2× 100G CWDM8 wavelengths in a single 16-fibre run, with an OFNP plenum-rated
jacket for installation in air-handling spaces. Built to ≤0.35dB insertion loss at
850nm and 1300nm, MPO female connectors on both ends with Type B crossover polarity,
OM4 50/125µm multimode glass, operating temperature -10°C to 60°C, and compliant
with TIA-568 and IEC 61754-7. IC Certified for Canada and the US.

The MikroTik DDQ+85MP01D is a QSFP-DD 400G optical transceiver module designed for high-speed fibre connections in ultra-fast network environments such as the CRS812 DDQ and CRS804 DDQ. Using an MTP/MPO connector with 850nm multimode optics, it is ideal for 400G deployments where direct-attach cable (DAC) reach is insufficient. The module features built-in digital diagnostics monitoring — covering optical power, voltage, temperature, and laser bias current — for proactive health monitoring in demanding data centre and core network installations. An MTBF of approximately 200,000 hours at 25°C ensures long-term reliability.

The SYNOXX 16FMTPOM4-5M is a 16-fibre OM4 multimode MPO-to-MPO Type B (crossover)
plenum trunk cable delivering 5-metre within-cabinet and short cross-connect runs for
parallel optic systems — purpose-built for same-cabinet 100G and 400G connections where
3m is too short and 10m creates unnecessary cable bulk, supporting 2× simultaneous 100G
SR8 links, 1× 400G SR8 link, or 2× 100G CWDM8 wavelengths in a single 16-fibre run, with
an OFNP plenum-rated jacket for air-handling space code compliance. Built to ≤0.35dB
insertion loss at 850nm and 1300nm, MPO female connectors on both ends, Type B crossover
polarity, OM4 50/125µm multimode glass, and operating temperature -10°C to 60°C. IC
Certified for Canada and the US.