List of products by brand MikroTik

The MikroTik XS+85LC01D is a cost-effective multimode SFP/SFP+/SFP28 transceiver module supporting 1.25G, 10G, and 25G data rates over distances of up to 100 metres via a Dual LC UPC connector. Operating at 850 nm wavelength, it is compatible with a wide range of MikroTik devices including the RB5009, CCR2116, netPower series, and various CRS and CSS switches. Built-in digital diagnostics provide real-time monitoring of key transceiver parameters to assist with network health visibility and proactive maintenance planning.

The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.

The MikroTik hAP ax lite (L41G-2axD) is a compact and affordable Wi-Fi 6 (802.11ax) home access point and router designed to deliver next-generation wireless performance without breaking the bank. Powered by an 800 MHz ARM CPU with 256 MB of RAM and running RouterOS v7, it offers four Gigabit Ethernet ports, AX600 dual-chain wireless on the 2.4 GHz band, and convenient USB-C power delivery — all in a small, passively cooled form factor. Ideal for budget-conscious deployments where modern wireless standards and powerful routing software are still a must.

The MikroTik XQ+DA0003 is a 3-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. It is designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices such as the CCR2216, CRS504, CRS518, CRS510, and CRS520, offering a latency-free, plug-and-play alternative to optical transceivers and fibre patch cables for rack-to-rack or within-cabinet connections. The 3-metre length provides enough reach to comfortably span adjacent rack units or nearby racks while keeping cable management tidy and installations clean.

RBM33G: A powerful OEM RouterBOARD with three Gigabit Ethernet ports, two miniPCIe slots, and robust expansion capabilities. Perfect for custom enclosures and versatile networking setups, including multiple 3G/LTE modem configurations.

The S+85DLC03D is a 10G SFP+ transceiver designed for 300-meter Multi Mode fiber connections. It features an LC connector and is compatible with a wide range of MikroTik and non-MikroTik SFP+ devices.

The hAP ac lite TC is a dual-concurrent access point with 2.4GHz and 5GHz Wi-Fi support, five Ethernet ports, PoE-out, USB for 3G/4G, and a versatile universal tower case for flexible placement.

The hAP ac lite is a compact dual-concurrent access point supporting both 2.4GHz and 5GHz Wi-Fi frequencies. Equipped with five Ethernet ports, PoE-out, and USB for 3G/4G modem support, it's perfect for small offices and homes.

The MikroTik RB260GSP is a compact SOHO smart switch offering five Gigabit Ethernet ports, one SFP cage, and passive PoE output on four of its five Ethernet ports — all in a lightweight desktop plastic enclosure. Powered by the QCA8337 switch chip and running MikroTik's dedicated SwOS (SwitchOS) operating system, it delivers straightforward yet flexible Layer 2 switching management through a clean web interface. Ports 2–5 pass through passive PoE at the same voltage applied to the unit, making it simple to power compatible wireless access points, IP cameras, or small routers without the need for separate PoE injectors. 

The MikroTik CADDY is a 10-pack of replacement NVMe drive tray inserts purpose-built for the MikroTik ROSE Data server (RDS). Each tray provides quick, secure NVMe drive mounting within the RDS chassis — allowing drives to be installed, swapped, or replaced cleanly without improvised mounting solutions. For a pack of 10, the CADDY is the essential on-site spare for any ROSE Data server deployment where NVMe drives are added, replaced, or rotated over the server's operational life.