List of products by brand MikroTik

The MikroTik CCR2004-16G-2S+ is a powerful 1U rack-mount router built on the Annapurna Labs AL32400 quad-core ARM64 processor running at 1700 MHz with 4 GB of RAM, making it the strongest single-core performer in the CCR2004 series. It provides 16× Gigabit Ethernet ports and 2× 10G SFP+ ports, runs RouterOS v7 with a Level 6 licence, and features dual hot-swap PSU slots accepting 100–240 V AC — giving it full power redundancy for mission-critical deployments. With IPsec hardware acceleration reaching up to 2.6 Gbps and routing throughput of up to 35 Gbps at 1518-byte frames, it is suited to ISPs, enterprise networks, and data centres requiring a high-performance, versatile router at an accessible price point.

The MikroTik CRS418-8P-8G-2S+RM is the wireless-free 1U rackmount edition of the CRS418 platform — all the switching, routing, PoE, and 10G uplink capability of the CRS418 series without the Wi-Fi 6 radio. It combines 16× Gigabit Ethernet ports (8 with 802.3af/at PoE-out), a dedicated Gigabit management port, 2× 10G SFP+ uplinks, the quad-core IPQ-8072A 2.2 GHz ARM64 CPU with L3 hardware offloading, 1 GB RAM, dual redundant AC power supplies, USB 3.0, and RouterOS v7 License Level 5 — a clean, no-compromise rackmount switch-router for environments where Wi-Fi is handled separately or not needed at all.

The MikroTik CRS328-4C-20S-4S+RM is a feature-rich 1U rackmount managed switch offering 28 independent ports in a highly flexible configuration: twenty 1GbE SFP cages, four 10GbE SFP+ cages, and four combo ports that accept either a Gigabit Ethernet RJ45 connection or an SFP module. Powered by the 98DX3236 switching chip with a dual-core 800 MHz ARM CPU and 512 MB of RAM, it delivers non-blocking Layer 2 wire-speed switching. Like other CRS-series devices, it supports dual boot between RouterOS and SwitchOS, allowing operators to choose between full Layer 3 routing capability or a streamlined managed switch interface. Dual redundant power supplies provide high-availability operation. 

The MikroTik RB5009UPr+S+IN is a high-availability PoE-out router — quad-core ARM64 Marvell 88F7040 at 350–1400 MHz, Marvell 88E6393 switch chip, 1 GB RAM, 1 GB NAND, RouterOS v7 License 5, 7× Gigabit Ethernet (PoE-in reverse Mode B + PoE-out 802.3af/at), 1× 2.5G Ethernet (PoE-in 802.3af/at + PoE-out), 1× SFP+ (10G), USB 3.0, 3 DC inputs (DC jack + PoE-in + 2-pin terminal, all 24–57V), 130W total PoE-out budget (25W per port max), 150W max / 16W without attachments, passive cooling, IP20, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 48V 2A adapter, IEC cord, K-55 screw kit, connector plug. USD 299.00.

The MikroTik Wireless Wire Cube Pro (CubeG-5ac60aypair) is a preconfigured point-to-point kit of two Cube 60Pro ac devices — 802.11ay 60 GHz primary link (up to 2.4 km tested), automatic 5 GHz 802.11a/n/ac failover (433 Mbps, 11.5 dBi directional antenna), Qualcomm IPQ-4019 quad-core ARM 32bit at 448–896 MHz, 256 MB RAM, 64 MB FLASH, RouterOS v7 License 4, 1× GbE PoE-in (802.3af/at, 18–48V) per unit, GPS, passive cooling, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS certified. Includes 2× cube mount brackets, 2× 24V 0.8A adapters, 2× hose clamps, 2× GbE PoE injectors. USD 298.00 per pair.

The MikroTik netPower 16P (CRS318-16P-2S+OUT) is a compact outdoor 18-port dual-boot PoE switch — 98DX226S dual-core ARM 32-bit at 800 MHz, 256 MB RAM, 16 MB flash, RouterOS v7 License 5 or SwitchOS, 16× GbE 802.3af/at PoE-out (Ether1–16) + 2× SFP+ 10G, 36 Gbps non-blocking throughput, 72 Gbps switching capacity, 53.6 Mpps forwarding rate, dual DC jack input (18–30V or 48–57V), 316W max / 16W without attachments, no onboard voltage converter, passive cooling, IP54, 303 × 212 × 78 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set, 2× hose clamps, 2× DC to terminal block adapters. Power supply NOT included.

The MikroTik CRS309-1G-8S+IN is a compact desktop switch with 8x 10G SFP+ ports, 1 Gigabit Ethernet port, dual boot OS, and advanced network performance.

The mANT30 PA is a high-performance 5 GHz parabolic dish antenna with a 30 dBi gain, designed for long-distance wireless links. This model features a precision alignment mount for accurate and stable installations.

The MikroTik Cloud Hosted Router (CHR) P-Unlimited License provides a powerful, feature-rich solution for optimizing and securing modern cloud networks. Advanced QoS, high-speed connectivity, and robust security ensure reliable and efficient performance for diverse networking needs.

The MikroTik netFiber 9 is a powerful IP54-rated outdoor fibre switch combining 1 Gigabit Ethernet port, 5 SFP ports, and 4 SFP+ 10G ports in a passively cooled, weatherproof enclosure. Supporting both RouterOS v7 and SwitchOS (dual boot), it is capable of light routing tasks in addition to switching, making it a versatile solution for building outdoor optical 10G networks — particularly suited for connections exceeding 100 metres where maintaining data rates is essential. It ships as a complete kit with a PoE injector, power adapter, and mounting hardware.