MikroTik CRS418-8P-8G-2S+RM Rackmount PoE Switch 1U
The MikroTik CRS418-8P-8G-2S+RM is the wireless-free 1U rackmount edition of the CRS418 platform — all the switching, routing, PoE, and 10G uplink capability of the CRS418 series without the Wi-Fi 6 radio, at USD 449. It combines 16× Gigabit Ethernet ports (8 with 802.3af/at PoE-out), a dedicated Gigabit management port, 2× 10G SFP+ uplinks, the quad-core IPQ-8072A 2.2 GHz ARM64 CPU with L3 hardware offloading, 1 GB RAM, dual redundant AC power supplies, USB 3.0, and RouterOS v7 License Level 5 — a clean, no-compromise rackmount switch-router for environments where Wi-Fi is handled separately or not needed at all.
We only offer IC Certified products. For international products, contact us.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge.
The MikroTik CRS418-8P-8G-2S+RM is built on the same foundation as the CRS418-8P-8G-2S+WiFi — same quad-core CPU, same switch chip, same port mix, same dual redundant PSUs — with one deliberate difference: no Wi-Fi radio. For network environments where wireless is already covered by dedicated access points, a ceiling-mount CAPsMAN deployment, or an upstream wireless controller, paying for an integrated radio you will never use makes no sense. The CRS418-8P-8G-2S+RM strips that out and passes the savings directly to USD 449.
What remains is a formidable 1U rackmount platform. The quad-core IPQ-8072A ARM64 CPU at 2.2 GHz, paired with 1 GB RAM and the 98DX226S switch chip with L3 hardware offloading, provides the processing power to run as an internet gateway, full RouterOS firewall, VLAN router, and CAPsMAN controller simultaneously — approximately 3× faster than the CRS320 or CRS328 at a comparable or lower price.
The 8× PoE-out ports (Ether9–Ether16) with 802.3af/at and 24V Passive PoE-out support up to 150W total PoE budget — enough to power access points, IP cameras, VoIP phones, and IoT devices directly from the switch. The 2× 10G SFP+ uplinks handle ISP fiber hand-off, core switch connectivity, and high-speed NAS links without a bottleneck. The dedicated Gigabit management port with direct CPU line keeps out-of-band management clean and available regardless of data plane load.
Key features:
- 16× 10/100/1000 Mbps Gigabit Ethernet ports + 1× dedicated Gigabit management port (17 total)
- 8× PoE-out ports (Ether9–Ether16) — 802.3af/at and 24V Passive PoE-out, 150W total PoE budget, low-voltage limit 1.1A / high-voltage limit 0.56A, max 5.4A total
- 2× 10G SFP+ uplink cages — fiber ISP hand-off, core switch uplinks, high-speed NAS
- L3 hardware offloading — wire-speed routing between VLANs without CPU overhead
- Quad-core IPQ-8072A ARM 64-bit CPU, 2,208 MHz, 1 GB RAM, 128 MB NAND
- 98DX226S switch chip
- Dual redundant AC power inputs (100–240V, 50–60 Hz), 2 PSU slots
- 4-fan active cooling, -20°C to +70°C
- Max power consumption 215W (28W without attachments)
- 1× USB 3.0 Type-A port (up to 1A) with USB Power Reset — storage, backups, configuration
- RJ45 serial console port for out-of-band management
- CPU temperature, PCB temperature, current, and voltage monitoring
- Mode button
- RouterOS v7, License Level 5 — VLANs, ACLs, SNMP, firewall, CAPsMAN, traffic shaping, advanced monitoring — no subscriptions, no paywalls, free updates for life (minimum 5 years)
- Certified CE, EAC, RoHS | IP20
- MTBF ~200,000 hours at 25°C
In the box: 2× IEC cords, K-54 kit, rack ears.
Ideal for: small and medium offices that already use dedicated access points or a CAPsMAN deployment; server rooms and network closets replacing a stack of switch, router, and firewall appliances with a single 1U device; WISPs and ISPs needing a managed PoE switch with 10G uplinks and full RouterOS routing; homelabs and network labs; and any deployment where Wi-Fi is handled externally and the priority is maximum switching, routing, and PoE capability per rack unit at the best price.
- Product code
- CRS418-8P-8G-2S+RM
- CPU architecture
- ARM 64bit
- CPU
- Quad-Core IPQ-8072 2208 MHz
- Switch chip model
- 98DX226S
- Operating System
- RouterOS v7, License level 5
- Size of RAM
- 1 GB, DDR3L
- Storage size
- 128 MB, NAND
- Max Power consumption
- 215 W
- Max power consumption without attachments
- 28 W
- PoE out ports
- Ether9 - Ether16
- PoE out
- 802.3af/at
- Max total out (A)
- 5.4 A
- Total output power
- 150 W
- Dimensions
- 443 x 230 x 44
- Number of AC inputs
- 2
- AC input range
- 100-240 V
- Number of USB ports
- 1 USB 3.0 type A
- Operating Temperature
- -20°C to +70°C
- Number of 10G SFP+ ports
- 2
- Number of 1G Ethernet ports
- 17
- Max out per port output (input below 30 V)
- 1.1 A
- Max out per port output (input above 30 V)
- 0.55 A
General information
All students who attend the Training can receive a free L4 license from MikroTik. Training should be at least three days long.
Students are allowed to take the certification test ONLY upon the attendance of individual training course, in the class, under the supervision of a MikroTik Certified Training Partner.
Each certification test consists of a pre-defined % of random questions (multiple choice and true/false) from specific question categories. Items also have a difficulty parameter. MTCNA test is generated from more straightforward questions, Advanced tests – from more difficult questions.
Only one attempt is allowed. The test must be finished within one hour. The passing grade is set to 60%. There are 25 questions in the exam.
Certificate numbers and RouterOS L4 licenses are assigned automatically by MikroTik. Students can see their certificates and generate license keys once logged into the account server. Printed documents from MikroTik cost USD 30 per piece. Shipping is not included.
Remote training sessions and certification exams are not allowed.
MikroTik Certification Test without prior attendance of particular MikroTik Training Session is not allowed.
Wireless Netware offers every participant a free RouterBOARD hAP-ac-lite.
The price includes class attendance, course materials, coffee breaks and lunch, "Only for local Training." The amount does not cover travel and accommodation expenses.
Please bring (very important): Laptop, power extension strip (10ft./3m) with five sockets, one long Ethernet cable (16ft./5m+) and several short Ethernet cables.
Cost: Early bird price for the course is $850. It is valid 15 days before the scheduled session, referring to the MikroTik Training website. The price will be $1050 after the early bird date. The price includes class attendance, course materials, coffee breaks and lunch," Only for local Training." The amount does not cover travel and accommodation expenses. Seating is limited to only four students. The seat is reserved and guaranteed just after the payment is received in full amount.
Certificates will only be valid for three years.
Become a consultant: It's simple if you have MTCNA (score 75%+) and at least one valid MikroTik Engineer level certificate (MTCRE, MTCWE, MTCTCE, MTCUME or MEDICINE) with score 75%+, apply by email with your mikrotik.com account name and fields of expertise and MikroTik will add you to the list. To stay on the consultant list, you will have to have valid certificates, participate in the MikroTik Forum and attend the ...M.U.M. events in your country conducting RouterOS case studies or workshops for the rest of the attendees.
By purchasing any of "Training Courses," you signify your agreement to these terms and conditions. If you do not agree to these Terms and Conditions, do not use this Site or Service. *WNT may modify this ...T.O.C. at any time and such changes will be effective on the date that such modified ...T.O.C. is posted on this Site. Use of the Site or Service after such changes have taken effect constitutes acceptance of all changes. Training classes, courses, and workshops may be subject to additional notices, class/course descriptions and policies (collectively "Additional Terms"), all of which are made part of this ...T.O.C. by this reference. If there is any conflict between this ...T.O.C. and Additional Terms posted for or applicable to a specific part of Sites such as training course description, the latter supersedes concerning using that particular part of the Site or accurate Service, please read these terms carefully, and keep a copy of them for your reference.
Returns:
All returns to WNT LTD. are handled as exchanges or store credit toward a future purchase. All returns must have a valid ...R.M.A. Number. To request an ...R.M.A. number, log into your account and select. ...R.M.A. from the options menu at the left of your screen. Identify the order and the product you wish to ...R.M.A. and follow instructions on the screen. Once your ...R.M.A. request is received, our ...R.M.A. The team will review your application and respond within two business days or sooner. All products returned for an exchange or store credit must be returned within 30 days of the invoice date. Defective products received by the customer as ...D.O.A. must be reported within seven days. Shipping errors, such as incorrect quantities or incorrect product received, must be reported within seven days. Products purchased from our Clearance Sale, Overstock, Open Box or Special Order (...S.P.O.), or non-stocked items, or custom-assembled products, cannot be returned or exchanged. Order shipments, which arrived damaged, must have a completed. "Damage Parcel Report" with ...U.P.S., USPS, or DHL. All products being returned must be shipped pre-paid. Returns sent C.O.D. will not be accepted and returned to the shipper at the customer's expense. If the repair is under warranty, WNT LTD. will return the product to the customer, within Canada-Post, using Standard Service at no charge. Expedited shipping methods, international shipping costs, customs fees, and duties are the customer's sole responsibility. For non-warranty returns, the customer is responsible for all related shipping costs. All products being returned for store credit must be in the original box with all accessories, warranty cards and instructional sheets, and new, unused condition with the factory seal intact. We do not accept returns for products that have been opened or have missing parts, manuals, warranty cards, or damaged when returned (unless it's ...D.O.A.). A 25% restocking fee will apply. To ensure that the product remains in returnable condition, do not use the product box as the shipping box. You must repackage in another box with appropriate packing materials. Products arriving in a product box will be returned to the shipper at the customer's expense. The customer is responsible for adequately packaging the products returned. Contents of the package not matching the information on the ...R.M.A. form will be cause for the return of ALL equipment.
