List of products by supplier MikroTik

The MikroTik wAP ax is a compact dual-band Wi-Fi 6 outdoor and indoor access point — AX3000 with 2×2 MIMO on both 2.4 GHz (574 Mbps, IPQ-5010, 6.9 dBi) and 5 GHz (2,400 Mbps, QCN-6102, 7 dBi), dual-core ARM32 IPQ-5010 at 800 MHz, 256 MB RAM, 128 MB NAND, 2× Gigabit Ethernet ports with 802.3af/at PoE-in, DC jack (12–57V), passive cooling, IP54, -40°C to +70°C, RouterOS v7 License 4, 9W max. WPA3/OWE, CAPsMAN-ready, fast roaming. CE, FCC, IC, EAC, and RoHS certified — fully IC-certified for Canadian sale. Includes 24V 0.8A power adapter, Gigabit PoE injector, desktop stand, ceiling mount bracket, wAP mount, K-52 fastening set, hose clamp, and plastic zip tie. 

The MikroTik GPeRx4 is an IP68-rated outdoor PoE splitter — taking a single 802.3bt 90W PoE-in port and distributing it across three independent 802.3af/at PoE-out ports (Ether2–Ether4), each delivering up to 30W, with a fourth port (Ether1) as the PoE-in uplink. SwOS Lite managed with VLAN, SNMP, traffic shaping, interface monitoring, and GPEN fault detection. 802.3bt PoE-in (48–57V) plus 2-pin terminal input (24–57V), Marvell 88E6341 switch chip, 200 MHz CPU, 64 KB FLASH, 4W without attachments and 115W max, -40°C to +70°C, MTBF ~100,000 hours at 25°C. Includes hose clamp. CE, EAC, and RoHS certified.

The MikroTik CSS318-16G-2S+IN is a compact 10-inch form factor managed switch — 16 Gigabit Ethernet ports and 2 SFP+ 10G uplink ports running SwOS on an Marvell 98DX2518 switch chip, 16 MB FLASH, passive cooling, 10W without attachments and 13W max, -40°C to +70°C, MTBF ~200,000 hours at 25°C, IP20. CE, EAC, and RoHS certified. Mounts in 10-inch racks, standard 19-inch racks, or two units side-by-side in a single 1U 19-inch rack space. Includes IEC cord, screw set (4), and CSS rack ears. The correct managed switch for small and medium offices, home networks, and rackmount environments where 24 ports are too many, 8 ports are too few, and 10G SFP+ uplinks are required.

The MikroTik RB260GS is a compact smart switch with 5x Gigabit Ethernet ports, 1 SFP cage, and SwOS for easy configuration. Ideal for small office and home networks.

The MikroTik CRS328-4C-20S-4S+RM is a 28-port 1U rackmount switch with 20 SFP, 4 SFP+, and 4 combo ports, dual boot OS, and dual power supplies for versatile networking.

MikroTik GrooveA 52: Compact 2.4/5GHz AP/Backbone/CPE with built-in N-male connector, Omni antenna, and AP mode support.

The hAP ac lite is a compact dual-concurrent access point supporting both 2.4GHz and 5GHz Wi-Fi frequencies. Equipped with five Ethernet ports, PoE-out, and USB for 3G/4G modem support, it's perfect for small offices and homes.

The hAP ac lite TC is a dual-concurrent access point with 2.4GHz and 5GHz Wi-Fi support, five Ethernet ports, PoE-out, USB for 3G/4G, and a versatile universal tower case for flexible placement.

The cAP ac is a dual-band wireless access point designed for ceiling or wall mounting. It offers 2.4GHz and 5GHz coverage, dual Gigabit Ethernet ports with PoE support, and IPsec hardware encryption, making it ideal for both aesthetics and functionality.

The MikroTik cAP XL ac (RBcAPGi-5acD2nD-XL) is a dual-band ceiling-mount 802.11ac access point — Qualcomm IPQ-4018 quad-core ARM 32bit at 488–896 MHz, 128 MB RAM, 16 MB FLASH, RouterOS v7 License 4, AC1200 (300 Mbps 2.4 GHz 802.11b/g/n + 867 Mbps 5 GHz 802.11a/n/ac), 2× 2 dual-chain, 6 dBi at 2.4 GHz + 5.5 dBi at 5 GHz, built-in reflector, 360° coverage, 2× GbE (PoE-in Ether1 802.3af/at 18–57V, passive PoE-out Ether2 up to 57V 500 mA), passive cooling, mode button, 191 × 42 mm, -40°C to +70°C, MTBF ~100,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. USD 99.00.