List of products by supplier MikroTik

Wireless Wire Dish: Achieve 2 Gbps aggregate speeds over a distance of up to 1.5 km! A revolutionary 60 GHz wireless solution offering fiber-like quality and stability at a fraction of the cost.

The MikroTik QMP-LDF is an advanced pole, mast, and wall mount adapter for the MikroTik LDF series — offering two standard pole/mast mounting configurations plus QMP (Quick Mount Point) compatibility for wall installation, all in a single adapter made from MikroTik's anvilNITE™ composite plastic. It is the correct mounting solution for any LDF series deployment that requires wall mounting, a more flexible pole mount, or a sturdier alternative to the standard LDF bracket. One adapter. Three mounting options. No tools beyond what you already have on site.

The MikroTik wAP LR2 kit (RBwAPR-2nD&R11e-LR2) is an outdoor 2.4 GHz LoRa® IoT gateway — R11e-LR2 miniPCIe LoRa card (2.4 GHz Chirp spread spectrum, 4.7 dBi built-in LoRa antenna), pre-installed UDP packet forwarder to public or private LoRa servers, single-core MIPSBE QCA9531 at 650 MHz, 64 MB RAM, 16 MB FLASH, RouterOS v7 License 4, 2.4 GHz 802.11b/g/n Wi-Fi 4 2-chain 300 Mbps backend (2 dBi built-in WLAN antenna), 1× 10/100 Ethernet with passive PoE-in (9–30V), DC jack 9–30V, automotive input 9–30V, 1× Mini SIM slot, 1× miniPCIe slot, passive cooling, IP54, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS certified. Includes PoE injector, 24V 0.8A power adapter, wAP desktop stand, hose clamp, K-52 fastening set. 

The MikroTik L11UG-5HaxD is a compact outdoor Wi-Fi 6 access point with USB LTE modem support — single-band 5 GHz 802.11ax AX600 2-chain (600 Mbps max), IPQ-5010 dual-core ARM32 at 800 MHz, 256 MB RAM, 128 MB NAND, RouterOS v7 License 4, 1× Gigabit Ethernet with 802.3af/at PoE-in (18–57V), 1× USB 2.0 Type-A for LTE modem or storage, passive cooling, IP66, -40°C to +70°C, MTBF ~100,000 hours at 25°C. CE, EAC, RoHS certified. The correct low-cost compact outdoor 5 GHz Wi-Fi 6 AP for point-to-point or point-to-multipoint deployments, cellular LTE WAN failover via USB modem, and primary LTE connectivity in locations without wired broadband, with full RouterOS v7 management and IP66 weatherproofing.

The MikroTik APA-1 is an automotive-grade DC power protection adapter — multi-layer overvoltage protection combining a gas-discharge tube, TVS (transient voltage suppressor) semiconductor, active polarity protection, low-pass filter, and standard fuse in a single inline adapter for MikroTik LtAP and other DC-powered devices installed in vehicle environments. Jumper-selectable output voltage with pass-through mode option. 100W max power consumption, passive cooling, IP20, -40°C to +85°C, MTBF ~100,000 hours at 25°C. CE, E-MARK, EAC, RoHS certified.

The ACMMCXRPSMA is a 260mm MMCX to RPSMA pigtail, ideal for adding a second wireless interface to BaseBox2 or BaseBox5 devices.

The ACOMNIRPSMA is a 2.4 GHz 5 dBi dipole antenna with an RPSMA connector, designed to enhance wireless connectivity for outdoor setups. Ideal for use with the BaseBox2, it enables 2x2 MIMO 2.4 GHz AP configurations.

The MikroTik R11e-LR8 is a LoRa® 863–870 MHz MiniPCI-e expansion card — adding a LoRa® 868 MHz radio to any MikroTik device with a MiniPCI-e slot, converting a standard RouterOS router or gateway into a LoRa® network server capable of receiving sensor data from up to 1,000 end-devices simultaneously. SX1301 baseband processor, 8 multi-SF channels, -40°C to +85°C, CE and RoHS certified. The correct expansion card for adding LoRa® 868 MHz capability to an existing MikroTik deployment without purchasing a dedicated LoRa® gateway device.

The quickMOUNT extra (QME) is an advanced wall mount adapter designed for large point-to-point and sector antennas, offering 190° antenna adjustment for precise alignment and compatibility with heavy-duty MikroTik antennas.

The MikroTik NetBox 5 ax is a compact outdoor Wi-Fi 6 access point delivering up to 1,200 Mbps on the 5 GHz band (802.11ax, 2-chain, 17 dBi directional panel antenna) in a 135 × 135 × 57 mm IP55-rated enclosure rated from -40°C to +70°C — running RouterOS v7 on a dual-core ARM64 IPQ-5010M at 1 GHz with 256 MB RAM. 802.3af/at PoE-in on a single Gigabit Ethernet port, passive cooling, 9W max, WPA3/OWE, CAPsMAN-ready. Includes Gigabit PoE injector, power adapter, and mounting hardware. The correct outdoor Wi-Fi 6 AP for point-to-client fixed wireless delivery, outdoor venue coverage, and any 5 GHz deployment where a directional panel and IP55 weatherproofing are required.