List of products by supplier MikroTik

The MikroTik CCR2004-1G-12S+2XS is a 1U rackmount cloud core router — AL32400 quad-core ARM64 at 1,700 MHz, 4 GB ECC RAM, 128 MB NAND flash, RouterOS v7 License 6, 1× GbE + 12× SFP+ 10G + 2× SFP28 25G, RJ45 serial console, dual redundant AC input (100–240V, 2× IEC cords), 60W max / 31W without attachments, 2 fans, IP20, 443 × 224 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Highest single-core performance in the CCR2004 family — up to 3.4 Gbps single IPsec tunnel, strong BGP feed processing. Includes 2× IEC cords, K10 screw and feet kit, rackmount bracket. Free software updates for life of product or minimum 5 years from purchase.

XQ+BC0003-XS+ is a versatile QSFP28 to 4x SFP28 break-out cable by MikroTik. Designed for optimized connectivity, it lets you seamlessly connect multiple 25 Gigabit devices to your CRS504 or CCR2216 devices.

The ACSMAUFL is a U.fl to SMA female pigtail designed to connect modems (LTE, LoRa, or wireless cards) with U.fl connectors to external antennas for enhanced signal quality.

Wireless Wire: Achieve 1 Gbps full duplex speeds without cables! A revolutionary 60 GHz wireless solution offering fiber-like quality at a fraction of the cost, perfect for replacing short Gigabit Ethernet runs.

The MikroTik RB5009UPr+S+IN is a high-availability PoE-out router — quad-core ARM64 Marvell 88F7040 at 350–1400 MHz, Marvell 88E6393 switch chip, 1 GB RAM, 1 GB NAND, RouterOS v7 License 5, 7× Gigabit Ethernet (PoE-in reverse Mode B + PoE-out 802.3af/at), 1× 2.5G Ethernet (PoE-in 802.3af/at + PoE-out), 1× SFP+ (10G), USB 3.0, 3 DC inputs (DC jack + PoE-in + 2-pin terminal, all 24–57V), 130W total PoE-out budget (25W per port max), 150W max / 16W without attachments, passive cooling, IP20, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 48V 2A adapter, IEC cord, K-55 screw kit, connector plug. USD 299.00.

The MikroTik CRS518-16XS-2XQ-RM is a 1U rack enterprise switch — Marvell 98DX8525 Prestera Aldrin2 switch ASIC, QCA9531 management CPU (MIPSBE, 650 MHz), 64 MB RAM, 16 MB FLASH, RouterOS v7 License 6, 16× SFP28 (25G, backward compatible 10G/1G), 2× QSFP28 (100G), 1× 10/100 Ethernet (management), RJ45 serial console, USB-A 1A, 2× hot-swap AC PSUs (100–240V), 4× hot-swap fans, 95W max / 45W without attachments, 1.2 Tbps switching capacity, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, 2× IEC cord, K-54 kit. USD 1,595.00.

The MikroTik CSS610-8P-2S+IN is a compact managed PoE switch — Marvell 88E6193X switch ASIC, 64 KB FLASH, SwitchOS Lite, 8× Gigabit Ethernet with 802.3af/at + passive PoE-out (140W total budget, 1000 mA low-voltage / 625 mA high-voltage per port), 2× SFP+ (10G), AC input 100–240V + DC jack 48–57V, 162W max / 12W without attachments, passive cooling, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, K-48 fastening set, IEC cord. USD 229.00. Browser-configurable managed PoE switch for home, SMB, hotel, call centre, and IP camera deployments.

S-85DLC05D is a 1.25G SFP transceiver featuring an 850nm Dual LC connector for up to 550 meters of Multi Mode fiber connectivity, complete with DDM (Digital Diagnostics Monitoring) support.

The S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, designed for Single Mode fiber connections up to 20 km. It features DDM support and compatibility with a wide range of MikroTik and non-MikroTik devices.

The MikroTik netPower 16P (CRS318-16P-2S+OUT) is a compact outdoor 18-port dual-boot PoE switch — 98DX226S dual-core ARM 32-bit at 800 MHz, 256 MB RAM, 16 MB flash, RouterOS v7 License 5 or SwitchOS, 16× GbE 802.3af/at PoE-out (Ether1–16) + 2× SFP+ 10G, 36 Gbps non-blocking throughput, 72 Gbps switching capacity, 53.6 Mpps forwarding rate, dual DC jack input (18–30V or 48–57V), 316W max / 16W without attachments, no onboard voltage converter, passive cooling, IP54, 303 × 212 × 78 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set, 2× hose clamps, 2× DC to terminal block adapters. Power supply NOT included.