25G/100G Solutions
There are 41 products.
MikroTik S+31DLC10D 10G SFP+ LR 1310nm 10km LC
Available!
The MikroTik S+31DLC10D is a new industrial-grade 10G SFP+ single-mode module for long-distance fiber links up to 10 km using the widely supported 1310 nm wavelength and dual-LC connector. It delivers all the essential capabilities of the popular XS+31LC10D at almost half the price — purpose-built for customers who need reliable 10G connectivity without 25G SFP28 overhead. Features built-in DDM for real-time monitoring of optical power, temperature, voltage, and laser bias current.
$102.12
SYNOXX 100G QSFP28 DAC Cable EDQPY-3 QSFP28 3m
In stock
The SYNOXX EDQPY-3 is a 100G QSFP28 to QSFP28 passive direct attach copper (DAC)
cable delivering 100Gbps over a 3-metre twinax connection using a 4×25G lane
architecture — purpose-built for cross-rack and adjacent-rack 100G connections where
1-metre cables fall short. Compliant with SFF-8636 and IEEE 802.3bj, featuring a
two-wire I2C interface for monitoring and control, low crosstalk design, and power
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.
cable delivering 100Gbps over a 3-metre twinax connection using a 4×25G lane
architecture — purpose-built for cross-rack and adjacent-rack 100G connections where
1-metre cables fall short. Compliant with SFF-8636 and IEEE 802.3bj, featuring a
two-wire I2C interface for monitoring and control, low crosstalk design, and power
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.
$100.64
MikroTik XS+85LC01D 1G/10G/25G SFP/SFP+/SFP28 Multimode LC
Available!
The MikroTik XS+85LC01D is a cost-effective multimode SFP/SFP+/SFP28 transceiver module supporting 1.25G, 10G, and 25G data rates over distances of up to 100 metres via a Dual LC UPC connector. Operating at 850 nm wavelength, it is compatible with a wide range of MikroTik devices including the RB5009, CCR2116, netPower series, and various CRS and CSS switches. Built-in digital diagnostics provide real-time monitoring of key transceiver parameters to assist with network health visibility and proactive maintenance planning.
$87.32
MikroTik XQ+DA0003 40G/100G QSFP+/QSFP28 DAC Cable 3m Twinax
Available!
The MikroTik XQ+DA0003 is a 3-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. It is designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices such as the CCR2216, CRS504, CRS518, CRS510, and CRS520, offering a latency-free, plug-and-play alternative to optical transceivers and fibre patch cables for rack-to-rack or within-cabinet connections. The 3-metre length provides enough reach to comfortably span adjacent rack units or nearby racks while keeping cable management tidy and installations clean.
$87.32
SYNOXX 25G SFP28 SR Transceiver ESP852X-01D LC 100m
In stock
The SYNOXX ESP852X-01D is a 25G SFP28 SR optical transceiver delivering 25.78Gbps
transmission over multimode fiber — up to 100m on OM4, 70m on OM3, and 20m on OM2
— using an 850nm VCSEL laser and PIN photodiode, purpose-built for high-density 25G
Ethernet switching, 5G CPRI fronthaul, and 100G breakout target deployments.
Features a hot-pluggable SFP28 form factor, LC duplex connector, and Digital
Diagnostic Monitoring (DDM) via SFF-8472, with low power consumption and compliance
with IEEE 802.3cc and SFF-8402 standards. Hot-pluggable, RoHS compliant, and IC
Certified.
transmission over multimode fiber — up to 100m on OM4, 70m on OM3, and 20m on OM2
— using an 850nm VCSEL laser and PIN photodiode, purpose-built for high-density 25G
Ethernet switching, 5G CPRI fronthaul, and 100G breakout target deployments.
Features a hot-pluggable SFP28 form factor, LC duplex connector, and Digital
Diagnostic Monitoring (DDM) via SFF-8472, with low power consumption and compliance
with IEEE 802.3cc and SFF-8402 standards. Hot-pluggable, RoHS compliant, and IC
Certified.
$59.20
SYNOXX 100G QSFP28 DAC Cable EDQPY-1 QSFP28 1m
In stock
The SYNOXX EDQPY-1 is a 100G QSFP28 to QSFP28 passive direct attach copper (DAC)
cable delivering 100Gbps data transfers over a 1-metre twinax connection using a
4×25G lane architecture — the ideal same-rack interconnect for 100G spine-leaf
switching environments. Compliant with SFF-8636 and IEEE 802.3bj, featuring a
two-wire I2C interface for monitoring and control, low crosstalk, and power
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.
cable delivering 100Gbps data transfers over a 1-metre twinax connection using a
4×25G lane architecture — the ideal same-rack interconnect for 100G spine-leaf
switching environments. Compliant with SFF-8636 and IEEE 802.3bj, featuring a
two-wire I2C interface for monitoring and control, low crosstalk, and power
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.
$57.72
SYNOXX 25G SFP28 DAC Cable EDSP2X-3 SFP28 3m
In stock
The SYNOXX EDSP2X-3 is a 25G SFP28 to SFP28 passive direct attach copper (DAC)
cable delivering 25.78Gbps over a 3-metre twinax connection — purpose-built for
adjacent-rack 25G connections where 1-metre cables fall short, including cross-rack
leaf-to-server links, flexible cable management through overhead trays and
under-floor pathways, and 100G breakout target deployments with extra slack.
Compliant with SFP28 MSA, SFF-8402, and IEEE 802.3by, featuring a hot-pluggable
SFP28 form factor, low power consumption, and a fully passive copper signal path
with no active components. Hot-pluggable, RoHS compliant, and IC Certified.
cable delivering 25.78Gbps over a 3-metre twinax connection — purpose-built for
adjacent-rack 25G connections where 1-metre cables fall short, including cross-rack
leaf-to-server links, flexible cable management through overhead trays and
under-floor pathways, and 100G breakout target deployments with extra slack.
Compliant with SFP28 MSA, SFF-8402, and IEEE 802.3by, featuring a hot-pluggable
SFP28 form factor, low power consumption, and a fully passive copper signal path
with no active components. Hot-pluggable, RoHS compliant, and IC Certified.
$57.72
MikroTik XS+DA0003 Tri-Rate 1G/10G/25G SFP28 DAC Cable 3m for CCR2004 and SFP28 Devices
Available!
The XS+DA0003 is a 3-meter direct attach cable supporting SFP 1G, SFP+ 10G, and SFP28 25G standards. It provides an affordable, low-latency solution for connecting devices within or across adjacent racks for high-speed networking.
$57.72
MikroTik XQ+DA0001 40G/100G QSFP+/QSFP28 DAC Cable 1m Twinax
Available!
The MikroTik XQ+DA0001 is a 1-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. Designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices — including the CCR2216, CRS504, CRS518, CRS510, and CRS520 — it offers a plug-and-play, zero-latency alternative to fibre transceivers and patch cables for within-cabinet or same-rack connections. The 1-metre length is the ideal choice for connecting devices installed in adjacent rack units or a tightly grouped cabinet stack.
$57.72
SYNOXX 25G SFP28 DAC Cable EDSP2X-1 SFP28 1m
In stock
The SYNOXX EDSP2X-1 is a 25G SFP28 to SFP28 passive direct attach copper (DAC)
cable delivering 25.78Gbps over a 1-metre twinax connection — the standard
same-rack interconnect for 25G leaf-to-server links, high-density SFP28 switch
stacking, and 100G breakout target deployments where short-reach passive copper
outperforms active optics on cost and power. Compliant with SFP28 MSA, SFF-8402,
and IEEE 802.3by, featuring a hot-pluggable SFP28 form factor, low power consumption,
and low-latency passive copper signal path with no active components required.
Hot-pluggable, RoHS compliant, and IC Certified.
cable delivering 25.78Gbps over a 1-metre twinax connection — the standard
same-rack interconnect for 25G leaf-to-server links, high-density SFP28 switch
stacking, and 100G breakout target deployments where short-reach passive copper
outperforms active optics on cost and power. Compliant with SFP28 MSA, SFF-8402,
and IEEE 802.3by, featuring a hot-pluggable SFP28 form factor, low power consumption,
and low-latency passive copper signal path with no active components required.
Hot-pluggable, RoHS compliant, and IC Certified.
$44.40