AI Networking & Data Center

The MikroTik CCR2004-16G-2S+ is a powerful 1U rack-mount router built on the Annapurna Labs AL32400 quad-core ARM64 processor running at 1700 MHz with 4 GB of RAM, making it the strongest single-core performer in the CCR2004 series. It provides 16× Gigabit Ethernet ports and 2× 10G SFP+ ports, runs RouterOS v7 with a Level 6 licence, and features dual hot-swap PSU slots accepting 100–240 V AC — giving it full power redundancy for mission-critical deployments. With IPsec hardware acceleration reaching up to 2.6 Gbps and routing throughput of up to 35 Gbps at 1518-byte frames, it is suited to ISPs, enterprise networks, and data centres requiring a high-performance, versatile router at an accessible price point.

The SYNOXX EDQD400-4QPx is a high-speed 400G QSFP-DD to 4x100G QSFP56 breakout DAC cable designed for data centers, high-performance computing, storage networks, switches, routers, and telecom infrastructure. It supports 400Gbps aggregate data rate using PAM4 signaling and is available in short-distance passive copper cable lengths.

The SYNOXX EDQD400-4QPx is a high-speed 400G QSFP-DD to 4x100G QSFP56 breakout DAC cable designed for data centers, high-performance computing, storage networks, switches, routers, and telecom infrastructure. It supports 400Gbps aggregate data rate using PAM4 signaling and is available in short-distance passive copper cable lengths.

The MikroTik CRS309-1G-8S+IN is a compact desktop switch with 8x 10G SFP+ ports, 1 Gigabit Ethernet port, dual boot OS, and advanced network performance.

The SYNOXX EQP29Y-10D is a 100G QSFP28 LR4 optical transceiver delivering 100Gbps 
transmission over single-mode fiber up to 10km using four LAN Wavelength Division 
Multiplexing (LWDM) channels around 1310nm — a standard LC duplex interface 
enabling long-reach 100G data centre interconnects, inter-building campus links, 
and metro-edge telecom connections without MPO ribbon fiber infrastructure. 
Compliant with QSFP28 MSA and IEEE 802.3ba, featuring a CAUI-4 (4×25G) electrical 
host interface, integrated Digital Diagnostic Monitoring (DDM) for real-time 
temperature, voltage, TX/RX power, and bias current monitoring, and low power 
consumption. Hot-pluggable, RoHS compliant, and IC Certified.

The MikroTik XQ+31LC02D is a 100 Gigabit QSFP28 optical transceiver module designed for single-mode fibre links of up to 2 kilometres. It uses the CWDM4 (Coarse Wavelength Division Multiplexing) architecture, transmitting across four separate wavelengths — 1271 nm, 1291 nm, 1311 nm, and 1331 nm — over a standard Dual LC UPC connector, making it compatible with widely available OS2 single-mode fibre patch cables. The XQ+31LC02D is well suited for inter-building, campus, or data centre interconnects where DAC cables or short-reach multimode optics cannot cover the required distance, and is compatible with MikroTik's QSFP28-equipped core switches and routers including the CCR2216, CRS504, CRS518, CRS510, and CRS520.

The SYNOXX EQD400-SR8 is a 400G QSFP-DD SR8 hot-pluggable optical transceiverdelivering 400Gbps via 8×50G PAM4 lanes at 850nm over OM4 multimode fiber to 100m(or OM3 to 70m) — the active optical alternative to 400G QSFP-DD DAC cables fordeployments requiring fiber connectivity beyond the passive copper reach class,including long-distance intra-datacenter 400G spine-to-leaf links, cross-row 400Gfabric connections, and InfiniBand HDR infrastructure requiring optical reach.
Compliant with QSFP-DD MSA, CMIS 4.0, IEEE 802.3cm 400GBASE-SR8, and IEEE 802.3bs400GAUI-8, with MPO-16/APC connector, Digital Diagnostic Monitoring (DDM), andpower consumption below 10W. IC Certified for Canada and the US.

The SYNOXX EDQD400-3-PAM4 is a 400G QSFP-DD to QSFP-DD passive direct attach
copper (DAC) cable delivering 400Gbps via 8×50G PAM4 lanes over a 3-metre passive
twinax connection — purpose-built for adjacent-rack 400G deployments where 1-metre
cables cannot bridge the distance, including cross-rack spine-to-leaf 400G links,
InfiniBand HDR GPU cluster connections spanning neighbouring racks, and 400G
AI/ML fabric interconnects requiring passive copper economics beyond the same-rack
reach class. Compliant with IEEE 802.3cd and InfiniBand HDR standards, featuring
a QSFP-DD interface, I2C management for cable identification, low insertion loss,
and low crosstalk across the full 3m run. Hot-pluggable, RoHS compliant, and
IC Certified.

The SYNOXX EDQD400-2QPx is a high-speed 400G QSFP-DD to 2x200G QSFP56 Direct Attach Copper breakout cable designed for short-distance, high-bandwidth network connections. It supports 400Gbps aggregate data rate using PAM4 signaling, making it suitable for data centers, high-performance computing, storage networks, telecom, and switch-to-switch interconnections.

The MikroTik CRS304-4XG-IN is a compact 4-port 10 Gigabit Ethernet desktop switch and router — 4× RJ45 10GbE copper ports (no SFP, no SFP+), Marvell Prestera 98DX3236 switch chip, quad-core ARM64 AL21400 at 1,400 MHz, 1 GB RAM, 1 GB NAND, dual-boot SwOS and RouterOS v7 License 6, USB 3.0 Type-A, DC jack (18–28V), passive cooling, IP20, -20°C to +50°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes 24V 1.2A power adapter. The correct compact 10GbE desktop switch for homelab operators, small server rooms, and 10G-ready workstation deployments where RJ45 copper 10GbE connectivity is required without SFP+ cabling, transceivers, or rack infrastructure.