AI Networking & Data Center

The SYNOXX EDSP2X-3 is a 25G SFP28 to SFP28 passive direct attach copper (DAC) 
cable delivering 25.78Gbps over a 3-metre twinax connection — purpose-built for 
adjacent-rack 25G connections where 1-metre cables fall short, including cross-rack 
leaf-to-server links, flexible cable management through overhead trays and 
under-floor pathways, and 100G breakout target deployments with extra slack. 
Compliant with SFP28 MSA, SFF-8402, and IEEE 802.3by, featuring a hot-pluggable 
SFP28 form factor, low power consumption, and a fully passive copper signal path 
with no active components. Hot-pluggable, RoHS compliant, and IC Certified.

The MikroTik XQ+DA0001 is a 1-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. Designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices — including the CCR2216, CRS504, CRS518, CRS510, and CRS520 — it offers a plug-and-play, zero-latency alternative to fibre transceivers and patch cables for within-cabinet or same-rack connections. The 1-metre length is the ideal choice for connecting devices installed in adjacent rack units or a tightly grouped cabinet stack.

The XS+DA0003 is a 3-meter direct attach cable supporting SFP 1G, SFP+ 10G, and SFP28 25G standards. It provides an affordable, low-latency solution for connecting devices within or across adjacent racks for high-speed networking.

The SYNOXX ESP31X-20D is a 10G SFP+ LR optical transceiver delivering 10Gbps data 
transmission over single-mode fiber (SMF) up to 20km using a 1310nm DFB laser 
transmitter and PIN photodetector receiver. Supports Digital Diagnostic Monitoring 
(DDM) for real-time parameter tracking, with under 1W power consumption, LC duplex 
connector, and compliance with SFF-8431, SFF-8432, SFF-8472, and IEEE 802.3ae 
standards. Hot-pluggable, RoHS compliant, and IC Certified for Canada and the US.

High-performance 25G SFP28 to SFP28 direct attach copper cable designed for short-range, high-speed connectivity. Supports up to 25.78Gbps with low power consumption and excellent EMI performance.

The SYNOXX EDSP2X-1 is a 25G SFP28 to SFP28 passive direct attach copper (DAC) 
cable delivering 25.78Gbps over a 1-metre twinax connection — the standard 
same-rack interconnect for 25G leaf-to-server links, high-density SFP28 switch 
stacking, and 100G breakout target deployments where short-reach passive copper 
outperforms active optics on cost and power. Compliant with SFP28 MSA, SFF-8402, 
and IEEE 802.3by, featuring a hot-pluggable SFP28 form factor, low power consumption, 
and low-latency passive copper signal path with no active components required. 
Hot-pluggable, RoHS compliant, and IC Certified.

The MikroTik XS+DA0001 is a 1-metre tri-rate Direct Attach Cable (DAC) that supports 1G SFP, 10G SFP+, and 25G SFP28 interfaces in a single cable — offering greater flexibility and value compared to single-rate DAC alternatives. It provides a low-cost, low-power, and low-latency copper interconnect solution for short-distance connections within a rack or between adjacent racks. Fully compliant with SFP+ MSA specifications and supporting 25-Gigabit Ethernet and Fibre Channel standards, it is an ideal choice for high-density data centre and server room cabling where SFP, SFP+, or SFP28 ports need to be directly connected. A 3-metre version is also available as the XS+DA0003.

The SYNOXX EDSPX-5-24 is a 10G SFP+ to SFP+ passive direct attach copper (DAC) 
cable delivering 10Gbps — and backward-compatible 1Gbps — over a 5-metre 24AWG 
twinax connection, purpose-built for extended-rack and end-of-row 10G deployments 
where 1m and 3m cables fall short, including cross-rack ToR switch-to-server links, 
long overhead tray runs, and flexible 10G fabric connections requiring extra passive 
copper reach. Compliant with SFP+ MSA, SFF-8431, and SFF-8432 standards, with 
power consumption below 0.2W per end, hot-pluggable SFP+ form factor, and 
operating temperature range of 0°C to 70°C. Hot-pluggable, RoHS compliant, and 
IC Certified.

The SYNOXX ESP85X-03D is a 10G SFP+ SR optical transceiver delivering 10Gbps 
transmission over multimode fiber (MMF) up to 300m using an 850nm VCSEL transmitter 
and PIN photodetector — purpose-built for high-density, short-range data centre and 
enterprise fiber links. Supports data rates up to 10Gbps with Digital Diagnostic 
Monitoring (DDM), all-metal housing for EMI protection, and compliance with IEEE 
802.3ae and SFF-8431 standards, with power consumption under 1W. Hot-pluggable, 
RoHS compliant, and IC Certified.

High-speed 10G SFP+ to SFP+ direct attach copper cable for multi-gigabit data transfer, low power consumption, and reliable short-range connectivity.