100G AI Networking

The MikroTik XQ+85MP01D is a dual-rate QSFP+/QSFP28 fibre transceiver module supporting both 40 Gigabit and 100 Gigabit operation over multimode fibre. Using an 850 nm wavelength and a 12-fibre 1×12 MTP/MPO connector in an SR4 configuration, it achieves link distances of up to 100 metres — making it well suited for high-density data centre and core switching deployments within a building or campus. It is compatible with MikroTik's 40G/100G QSFP28-equipped switches and routers such as the CCR2216, CRS504, and CRS518, and provides a cost-effective way to add short-reach 40G or 100G multimode fibre connectivity to any supported platform.

High-performance 100G QSFP28 to 4x SFP28 passive DAC breakout cable designed for data center and high-speed networking applications, featuring low crosstalk, low insertion loss, and excellent signal integrity.

The SYNOXX EDQPY-4SP3 is a 100G QSFP28 to 4×SFP28 passive direct attach copper 
(DAC) breakout cable that splits a single 100G QSFP28 port into four independent 
25G SFP28 connections over 3 metres of twinax copper — enabling cost-effective 
25G server and storage connectivity from a 100G spine or leaf switch port without 
additional transceivers. Compliant with IEEE 802.3bj, SFF-8636, and SFF-8402 
standards, featuring EEPROM support for device identification, low insertion loss, 
and passive operation with no active components required. Hot-pluggable, RoHS 
compliant, and IC Certified.

High-speed 100G QSFP28 to QSFP28 DAC cable, SFF-8636 compliant, IEEE 802.3bj support, low power consumption, excellent signal integrity.

The SYNOXX EDQPY-3 is a 100G QSFP28 to QSFP28 passive direct attach copper (DAC) 
cable delivering 100Gbps over a 3-metre twinax connection using a 4×25G lane 
architecture — purpose-built for cross-rack and adjacent-rack 100G connections where 
1-metre cables fall short. Compliant with SFF-8636 and IEEE 802.3bj, featuring a 
two-wire I2C interface for monitoring and control, low crosstalk design, and power 
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.

The MikroTik XQ+DA0003 is a 3-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. It is designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices such as the CCR2216, CRS504, CRS518, CRS510, and CRS520, offering a latency-free, plug-and-play alternative to optical transceivers and fibre patch cables for rack-to-rack or within-cabinet connections. The 3-metre length provides enough reach to comfortably span adjacent rack units or nearby racks while keeping cable management tidy and installations clean.

High-speed 100G QSFP28 to QSFP28 DAC cable, SFF-8636 compliant, IEEE 802.3bj support, low power consumption, excellent signal integrity.

The MikroTik MT-HotSwapFan is a hot-swappable replacement fan designed for MikroTik's newest high-performance devices, including the flagship CCR2216 and CRS518. It allows you to replace a failed fan without shutting down or restarting the device, eliminating unnecessary downtime. An essential spare for any network environment where continuous operation is a priority.

The SYNOXX EDQPY-1 is a 100G QSFP28 to QSFP28 passive direct attach copper (DAC) 
cable delivering 100Gbps data transfers over a 1-metre twinax connection using a 
4×25G lane architecture — the ideal same-rack interconnect for 100G spine-leaf 
switching environments. Compliant with SFF-8636 and IEEE 802.3bj, featuring a 
two-wire I2C interface for monitoring and control, low crosstalk, and power 
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.

The MikroTik XQ+DA0001 is a 1-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. Designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices — including the CCR2216, CRS504, CRS518, CRS510, and CRS520 — it offers a plug-and-play, zero-latency alternative to fibre transceivers and patch cables for within-cabinet or same-rack connections. The 1-metre length is the ideal choice for connecting devices installed in adjacent rack units or a tightly grouped cabinet stack.