Switches

The MikroTik CRS305-1G-4S+IN is a compact, silent desktop switch with 1 Gigabit Ethernet port, 4 SFP+ 10Gbps ports, dual boot OS, and power redundancy.

The MikroTik GPERx6 (CSS606-1G-2Gi-3S+OUT) is a rugged IP66 outdoor switch purpose-built for deployments where running separate power and data cables over long distances is impractical. Using hybrid fiber + copper cables, it carries 10G fiber data and DC power simultaneously over distances of 1–2 km — then splits them at the far end into 3× 10G SFP+ uplinks, 2× Gigabit Ethernet PoE-out ports, and 3× DC outputs for IoT gear and devices that do not support PoE. Built for perimeter surveillance, remote CCTV towers, solar-powered edge sites, and industrial campuses where every cable run matters.

The MikroTik CSS318-16G-2S+IN is a compact 10-inch form factor managed switch — 16 Gigabit Ethernet ports and 2 SFP+ 10G uplink ports running SwOS on an Marvell 98DX2518 switch chip, 16 MB FLASH, passive cooling, 10W without attachments and 13W max, -40°C to +70°C, MTBF ~200,000 hours at 25°C, IP20. CE, EAC, and RoHS certified. Mounts in 10-inch racks, standard 19-inch racks, or two units side-by-side in a single 1U 19-inch rack space. Includes IEC cord, screw set (4), and CSS rack ears. The correct managed switch for small and medium offices, home networks, and rackmount environments where 24 ports are too many, 8 ports are too few, and 10G SFP+ uplinks are required.

The MikroTik netPower Lite 7R (CSS610-1Gi-7R-2S+OUT) is an outdoor reverse PoE switch designed for MikroTik's GPEN concept — Marvell 88E6193X switch chip, SwitchOS Lite, 8× GbE (7× reverse PoE-in 12–57V passive + 1× passive PoE-out) + 2× SFP+ 10G, 28 Gbps non-blocking throughput, 56 Gbps switching capacity, 41.7 Mpps forwarding rate, triple power input (DC jack, passive PoE-in, 2-pin terminal, all 12–57V), 29W max / 7W without attachments, passive cooling, IP54, 303.5 × 211.9 × 71.3 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set and 2× hose clamps. Power supply not included.

The MikroTik CSS610-8G-2S+IN is a compact 10-port Layer 2 managed switch — 88E6393X switch chip, 8× GbE + 2× SFP+ 10G, 20 Gbps full-duplex switching capacity, SwOS web management interface, 1× RJ45 serial console, passive cooling, desktop or rackmount (1U with SFP+ ports facing rear), DC jack (24–57V) or 802.3af/at PoE-in on Ether1, 7.5W max without attachments, 175 × 110 × 28 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Non-PoE variant of the CSS610-8P-2S+IN. Includes 24V 1A power adapter and K-55 screw set. USD 99.00.

The MikroTik RB260GSP is a compact smart switch with 5x Gigabit Ethernet ports, PoE-out on ports 2-5, 1 SFP cage, and SwOS for easy management.

The MikroTik RB260GS is a compact smart switch with 5x Gigabit Ethernet ports, 1 SFP cage, and SwOS for easy configuration. Ideal for small office and home networks.

The MikroTik CRS804 DDQ (CRS804-4DDQ-hRM) is a compact 1U 400G switch built for AI clusters, storage fabrics, and high-speed aggregation. It features four 400G QSFP56-DD ports with flexible breakout down to 1G, dual 1G/10G Ethernet, a Marvell 98DX7335 switch chip, quad-core 2 GHz ARM CPU, 4 GB DDR4 RAM, dual hot-swap redundant power supplies, and two hot-swap cooling fans — all at 123W max power consumption. Runs RouterOS v7 with License Level 6.

The MikroTik CRS106-1C-5S is a compact smart switch with 5x SFP cages, 1x combo SFP/Gigabit port, RouterOS L5, and desktop case. Ideal for SFP device connections.