Antennas

The MikroTik 915 Omni antenna is a 5.2 dBi omnidirectional antenna kit for LoRa deployments in the 900–928 MHz frequency range — covering the 915 MHz band used in the U.S., Brazil, Australia, New Zealand, and other regions where 915 MHz is preferred over the 868 MHz band. Includes SMA female connector, 1m SMA male-to-SMA male cable with improved durability, and mechanical holder for mast attachment. IP66 rated — protected against powerful water jets — suitable for marine and coastal deployments. Compatible with KNOT LR9 kit, wAP KR9, and any LoRa device with 900–928 MHz support. Passive antenna — no firmware, no configuration. USD 49.00.

mANT LTE 5o is a 5 dBi omnidirectional LTE antenna with 2 x SMA connectors, ideal for enhancing LTE connectivity in areas with poor coverage. Designed for outdoor use, it pairs perfectly with MikroTik LTE devices like the wAP LTE and LtAP series.

The MikroTik HGO-antenna-OUT is a dual-band outdoor screw-on antenna delivering 3.3 dBi on 2.4 GHz and 5.5–7.1 dBi on 5 GHz via RP-SMA male connectors — the official antenna upgrade for the MikroTik NetMetal ac² and any compatible RP-SMA outdoor wireless device. Adding two HGO-antenna-OUT units to a NetMetal ac² transforms it into a full dual-band outdoor access point with extended gain on both bands. Weatherproof outdoor construction. No tools required — screw on, done.

The MikroTik HGO-LTE-W is a single broadband combo antenna covering 699 MHz – 3.8 GHz — replacing separate LTE and LoRa® antennas with one 1.5–4 dBi SMA male element rated for indoor and outdoor use from -40°C to +70°C. Designed for the MikroTik KNOT LR8 and LR9 kits, it supports LTE/5G, CAT-M1/NB-IoT, 868 MHz LoRa®, and 915 MHz LoRa® — including the Canadian 915 MHz LoRa® band — from a single antenna connection. It is the correct single-antenna solution for any KNOT kit deployment where simplicity, cost, and space matter more than maximum gain.

ACGPSA is an active GPS antenna specifically designed for the LtAP series products. Operating in the 1575.4 MHz spectrum, this IP67-rated antenna ensures reliable GPS connectivity in diverse environments, offering versatile installation options and a long 5-meter cable with an SMA connector.

LMR-195 N-Type Male to N-Type Female Cable

MikroTik LGO-LTE-W is a compact antenna for LTE and LoRa connectivity, covering 617–5925 MHz with 3 dBi gain and an SMA male connector. Measuring 172 x 19 x 13 mm, it suits space-limited IoT installations such as industrial cabinets, vending machines and remote monitoring equipment. MikroTik recommends it for KNOT LR8G and LR9G kits, KNOT Embedded LTE and KNOT Embedded LTE4 Global.

The MikroTik TOF-2400-8V-4 is an 8 dBi 2.4 GHz omni antenna designed for the wAP LR2 kit — extending LoRa® gateway coverage up to 3–4 km line of sight while also supporting standard 2.4 GHz WLAN. Includes a 1-metre SMA cable for remote antenna positioning and a mechanical holder for quick mast attachment. Compact, durable, and ready to deploy out of the box. The correct external antenna upgrade for any wAP LR2 deployment where the internal antenna does not provide sufficient coverage.

The MikroTik 868 Omni Antenna is a 6.5 dBi, IP66-rated omni antenna for LoRa® deployments in the 862–876 MHz band — redesigned from community feedback with higher durability, improved cable durability, and full IP66 water resistance in a smaller package. Includes a 1m SMA male-to-male cable, fastening set, and mechanical holder for 25–50 mm mast or wall mounting. Rated for marine and coastal environments. The 862–876 MHz frequency range does not cover the Canadian 915 MHz LoRa® band — confirm frequency compatibility before ordering.**

The MikroTik TOF-2400-8V-4 is a 2.4 GHz 8 dBi omnidirectional antenna — dual-purpose for both 2.4 GHz LoRa and 2.4 GHz WLAN simultaneously, SMA connector, 1m SMA cable included, mechanical mast holder for quick vertical mounting, up to 3–4 km line-of-sight coverage claimed by MikroTik. Compact, outdoor-durable construction. Primary pairing: wAP LR2 kit and R11e-LR2 mini PCIe gateway card. Compatible with any 2.4 GHz device using SMA connector. Passive antenna — no electronics, no firmware, no certification required. Includes 1m SMA cable + mast mechanical holder. USD 49.00.