List of products by supplier MikroTik
MikroTik is a globally recognized networking brand that offers advanced solutions such as routers, switches, and wireless systems designed to meet the needs of ISPs, enterprises, and individuals. Powered by RouterOS, MikroTik products are known for their reliability, scalability, and cost-efficiency, enabling seamless connectivity and management.
There are 253 products.
MikroTik MTP60-12V50-RS-DC 60W DC-DC Hot-Swap Power Supply
Product available for back-orders
The MikroTik MTP60-12V50-RS-DC is a 60W DC-DC hot-swappable power supply designed for compatible MikroTik devices including the CCR2004-16G-2S+, CRS504-4XQ-IN, and CRS510-8XS-2XQ-IN. It accepts -36V to -57V DC input and provides 12V DC output at up to 5A, making it ideal for integrating these devices into -48V DC-powered infrastructure while maintaining redundant power capability.
$87.32
MikroTik CRS328-4C-20S-4S+RM 20x SFP 4x SFP+ 4x Combo Dual Boot Rackmount Switch
Product available for back-orders
The MikroTik CRS328-4C-20S-4S+RM is a feature-rich 1U rackmount managed switch offering 28 independent ports in a highly flexible configuration: twenty 1GbE SFP cages, four 10GbE SFP+ cages, and four combo ports that accept either a Gigabit Ethernet RJ45 connection or an SFP module. Powered by the 98DX3236 switching chip with a dual-core 800 MHz ARM CPU and 512 MB of RAM, it delivers non-blocking Layer 2 wire-speed switching. Like other CRS-series devices, it supports dual boot between RouterOS and SwitchOS, allowing operators to choose between full Layer 3 routing capability or a streamlined managed switch interface. Dual redundant power supplies provide high-availability operation.
$664.52
MikroTik hAP ac lite Dual Band AC750 5-Port SOHO AP with PoE Out USB
Product available for back-orders
The hAP ac lite is a compact dual-concurrent access point supporting both 2.4GHz and 5GHz Wi-Fi frequencies. Equipped with five Ethernet ports, PoE-out, and USB for 3G/4G modem support, it's perfect for small offices and homes.
$87.32
MikroTik RB4011iGS+5HacQ2HnD-IN 10-Port Gigabit Dual-Band 2.4/5GHz 802.11ac Router with SFP+
Product available for back-orders
The MikroTik RB4011iGS+5HacQ2HnD-IN is a powerful indoor router combining ten Gigabit Ethernet ports, a 10Gbps SFP+ cage, and integrated dual-band 802.11ac Wi-Fi in a single desktop unit. At its core is a quad-core Cortex A15 AL21400 processor — the same architecture used in MikroTik's carrier-grade hardware — paired with 1 GB of RAM and hardware-accelerated IPsec, delivering serious routing performance for demanding environments. The 5GHz four-chain radio delivers up to 1733 Mbit/s (Wi-Fi 5), while the 2.4GHz two-chain radio adds 300 Mbit/s 802.11n coverage. Running RouterOS v7 with a MiniPCI-e expansion slot, passive PoE output on port 10, and dual power input options.
$407.00
wAP ac LTE6 kit
Product available for back-orders
The wAP ac LTE6 kit is a robust, dual-band wireless access point with CAT6 LTE modem for up to 300 Mbps download speed. Designed for indoor and outdoor use, it’s ideal for homes, remote areas, or as a backup connectivity solution.
$309.32
MikroTik GESP+POE-IN Passive PoE Injector Surge Protection
Product available for back-orders
The MikroTik GESP+POE-IN is a passive PoE injector with built-in surge protection — injects passive PoE power to mast-mounted antennas and access points while protecting downstream switches from lightning strikes and static build-up on outdoor cable runs. Designed as the ground-level companion to the GESP surge protector (mounted at the top of the mast) — together forming a dual-end surge protection system for outdoor deployments. Passive device — no RouterOS, no firmware, no configuration. Includes K-73 fastening set. Recommended attachment: PVC zip ties. USD 12.00.
$17.76
MikroTik PW48V-12V85W ±48V Telecom PSU CCR r2
Product available for back-orders
The MikroTik PW48V-12V85W is an open-frame DC-DC power supply designed specifically for use with MikroTik Cloud Core Routers (CCR) from revision r2 onwards. It accepts ±48V DC telecom power input (with a supported range of 36V to 57V at up to 3A) and converts it to a regulated 12V / 7A (85W) output, allowing CCR devices to be powered directly from standard telecom ±48V DC plant infrastructure. An ideal solution for ISP and carrier-grade deployments where ±48V DC power is the standard.
$81.40
MikroTik XQ+CM0000-XS+ QSFP28 to SFP28 Converter
Product available for back-orders
The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.
$87.32
MikroTik DPS-550AB-36G 550W Replacement Hot-Swap PSU
Product available for back-orders
The MikroTik DPS-550AB-36G is the official 550W hot-swap replacement power supply unit for the MikroTik ROSE Data Server (RDS2216). Engineered to match the RDS2216's energy-efficient, low heat-output architecture, it can be installed and replaced live — no shutdown, no service interruption, no data loss. At 12V / 550W output, the DPS-550AB-36G is the correct spare PSU to keep on-site for any ROSE Data Server deployment where uptime is a requirement.
$205.72
MikroTik LHG 5 ax 24.5 dBi Wi-Fi 6 Outdoor PtP CPE
Product available for back-orders
The MikroTik LHG 5 ax (LHG-5axD) is the compact, budget-entry Wi-Fi 6 long-range outdoor CPE in MikroTik's LHG ax series — the same modern 802.11ax platform as the XL model, at 24.5 dBi antenna gain. With 5 GHz Wi-Fi 6 at 1,200 Mbps, WPA3 security, Gigabit Ethernet with passive PoE-in (12–28V), dual-core IPQ-5010 ARM CPU, 256 MB RAM, aerodynamic grid antenna, IP54 weatherproofing, and FCC and IC certification, it is purpose-built for stable point-to-point links up to 20 km — ideal for building-to-building bridges, WISP CPE deployments, and remote site connectivity at an accessible entry price.
$146.52