List of products by supplier MikroTik

The MikroTik HGO-LTE-W is a single broadband combo antenna covering 699 MHz – 3.8 GHz — replacing separate LTE and LoRa® antennas with one 1.5–4 dBi SMA male element rated for indoor and outdoor use from -40°C to +70°C. Designed for the MikroTik KNOT LR8 and LR9 kits, it supports LTE/5G, CAT-M1/NB-IoT, 868 MHz LoRa®, and 915 MHz LoRa® — including the Canadian 915 MHz LoRa® band — from a single antenna connection. It is the correct single-antenna solution for any KNOT kit deployment where simplicity, cost, and space matter more than maximum gain.

The MikroTik KNOT LR8G kit is an industrial-grade multi-radio IoT gateway combining LoRa® (868 MHz), LTE CAT-M1/NB-IoT, concurrent GPS, Bluetooth 5.2, 2.4 GHz Wi-Fi (802.11b/g/n), RS485/Modbus, and dual 100 Mbps Ethernet with PoE-in and PoE-out — running full RouterOS v7 on a compact 122 × 87 × 26 mm platform at 6W idle consumption. Three power input options (DC jack 12–57V, 802.3af/at PoE-in, or 5V MicroUSB), DIN rail and wall mount hardware included, -40°C to +70°C operating range, 200,000-hour MTBF. **Canadian buyers: this is the 868 MHz LoRa® version — confirm LoRa® frequency band and LTE CAT-M1 band compatibility with Canadian carriers before ordering.**

The MikroTik 868 Omni Antenna is a 6.5 dBi, IP66-rated omni antenna for LoRa® deployments in the 862–876 MHz band — redesigned from community feedback with higher durability, improved cable durability, and full IP66 water resistance in a smaller package. Includes a 1m SMA male-to-male cable, fastening set, and mechanical holder for 25–50 mm mast or wall mounting. Rated for marine and coastal environments. The 862–876 MHz frequency range does not cover the Canadian 915 MHz LoRa® band — confirm frequency compatibility before ordering.**

The MikroTik TOF-2400-8V-4 is an 8 dBi 2.4 GHz omni antenna designed for the wAP LR2 kit — extending LoRa® gateway coverage up to 3–4 km line of sight while also supporting standard 2.4 GHz WLAN. Includes a 1-metre SMA cable for remote antenna positioning and a mechanical holder for quick mast attachment. Compact, durable, and ready to deploy out of the box. The correct external antenna upgrade for any wAP LR2 deployment where the internal antenna does not provide sufficient coverage.

The MikroTik R11e-LR2 is a 2.4 GHz LoRa Concentrator Gateway card in mini PCIe form factor — installs in any MikroTik device with a mini PCIe slot and connected USB lines, 4 RX channels + 1 TX channel, Chirp Spread Spectrum modulation (no interference with 2.4 GHz WLAN), designed for high-density industrial IoT sensor deployments, 2W max power consumption, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. CE, FCC, IC, RoHS certified. Compatible with RouterBOARD and other MikroTik mini PCIe hosts. USD 69.00.

The MikroTik Wireless Wire nRAY (nRAYG-60adpair) is a kit of two pre-paired 60 GHz point-to-point devices — 88F3720 dual-core ARM64 at 1 GHz per unit, 256 MB RAM, 16 MB flash, RouterOS v7 License 3, AES-encrypted wireless link, up to 2 Gbps aggregate throughput at distances up to 1,500 m, 1× GbE per unit (802.3af/at PoE-in, 12–57V), 7W max per unit, passive cooling, IP55, snow-resistant form factor, fine-tune alignment screws, 261 × 166 mm per unit, -30°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 2× 24V 0.38A power adapter, 2× Gigabit PoE injector, 2× nRAY solidMOUNT pole adapter, 2× nRAY aiming tool. Pre-configured — plug in and point.

The MikroTik nRayAIM-DH1 is a precision alignment and aiming attachment for the Wireless Wire nRAY 60 GHz point-to-point link — allowing installers to attach a scope of their choice directly to the nRAY for accurate beam alignment during installation. At 60 GHz, precise antenna aiming is not optional: even minor angular misalignment causes significant signal degradation. The nRayAIM-DH1 turns nRAY installation from an approximation exercise into a precision operation. It is the most cost-effective way to ensure every nRAY link is aligned correctly on the first attempt.

The MikroTik G1070 is a 500W open-frame replacement power supply unit for the MikroTik CRS328-24P-4S+RM switch — delivering dual-rail DC output at 53Vdc 8.8A and 26.5Vdc 17.6A from a universal 90–264Vac input, -10°C to +55°C tested ambient temperature, ~200,000-hour MTBF at 25°C. The correct replacement PSU to stock alongside any CRS328-24P-4S+RM deployment where power supply failure must not result in switch downtime or an emergency parts sourcing event.

The MikroTik G1270 is a 750W open-frame replacement power supply unit for the MikroTik CRS354-48P-4S+2Q+RM switch — delivering dual-rail DC output at 53Vdc 13.5A and 26.5Vdc 27A from a universal 90–264Vac input, with ~200,000-hour MTBF at 25°C. The correct replacement PSU to stock alongside any CRS354-48P-4S+2Q+RM deployment where power supply failure must not result in switch downtime or a cross-border parts sourcing delay.

The MikroTik RBGPOE-CON-HP is a rugged Gigabit PoE voltage converter that steps 48V PoE input (Passive PoE, Telecom PoE, 802.3af, or 802.3at — any 42–57V source) down to 24V Passive PoE output at up to 1A (24W) — powering any 8–30V RouterBOARD device from a 48V PoE infrastructure without a separate power adapter or injector. Two Gigabit Ethernet ports, integrated heatsink in a rugged metallic case, wall-mountable, shielded Ethernet support. The correct solution when your PoE switch delivers 48V and your RouterBOARD device needs 24V.