List of products by brand MikroTik

The MikroTik Audience is a tri-band indoor home access point with built-in mesh (CAPsMAN) support, combining one 2.4 GHz and two 5 GHz radios for a combined AC2900 wireless throughput. The second 5 GHz radio uses a dedicated Qualcomm QCA9984 four-chain chipset delivering up to 1733 Mbps, while the first 5 GHz radio (up to 867 Mbps, two chains) and the 2.4 GHz radio (up to 300 Mbps, two chains) handle client connections and interference avoidance in congested wireless environments. Built on the Qualcomm IPQ-4019 quad-core ARM CPU with 256 MB of RAM, it features two Gigabit Ethernet ports, runs RouterOS with a Level 4 licence, and supports passive PoE-in and DC jack powering. 

The MikroTik DDQ+85MP01D is a QSFP-DD 400G optical transceiver module designed for high-speed fibre connections in ultra-fast network environments such as the CRS812 DDQ and CRS804 DDQ. Using an MTP/MPO connector with 850nm multimode optics, it is ideal for 400G deployments where direct-attach cable (DAC) reach is insufficient. The module features built-in digital diagnostics monitoring — covering optical power, voltage, temperature, and laser bias current — for proactive health monitoring in demanding data centre and core network installations. An MTBF of approximately 200,000 hours at 25°C ensures long-term reliability.

The MikroTik CSS326-24G-2S+RM is a 1U rackmount smart switch with 24 Gigabit Ethernet ports and 2 SFP+ ports, powered by SwOS for versatile network management.

The MikroTik CRS305-1G-4S+IN is a compact, silent desktop switch with 1 Gigabit Ethernet port, 4 SFP+ 10Gbps ports, dual boot OS, and power redundancy.

The XS+31LC10D is a versatile 1.25G SFP, 10G SFP+, and 25G SFP28 module that's perfect for varied network setups. With extended compatibility, it is a direct upgrade from the previous 10G SFP+ 10 km model, offering more features at the same price.

The MikroTik GPERx6 (CSS606-1G-2Gi-3S+OUT) is a rugged, IP66-rated outdoor switch designed to simplify long-distance deployments by combining high-speed fibre, PoE, and DC power output in a single compact unit. Featuring three 10G SFP+ ports, three Gigabit Ethernet ports (with PoE-in and PoE-out), three DC outputs, and a dedicated 10G switch chip, it is purpose-built for use with hybrid fibre and copper cables — enabling power and data to be delivered over distances of 1–2 km to remote cameras, access points, and IoT devices. Passively cooled and rated for -40°C to 70°C operation, the GPERx6 runs SwOS and is ideal for perimeter surveillance, CCTV towers, industrial IoT, and solar-powered edge deployments.

The MikroTik CSS318-16G-2S+IN is a compact, passively cooled managed switch featuring 16 Gigabit Ethernet ports and 2 SFP+ 10G uplink ports, running MikroTik's lightweight SwOS operating system. Housed in a 10-inch form factor chassis that also fits 19-inch racks, it is ideal for deployments where 24 ports are too many and 8 ports simply are not enough. With browser-based configuration, broad SwOS feature support, and very low power consumption, it offers a practical and scalable solution for small to medium network environments.

The MikroTik G1483-0600WNB is a 600W hot-swap replacement or expansion power supply unit designed exclusively for the CRS320-8P-8B-4S+RM PoE++ switch. The CRS320 ships with a single 600W PSU as standard, and includes an expansion slot for a second PSU — adding this unit raises the total combined power output to 1150W, enabling up to 90W per PoE++ port. As a hot-swap unit, it can be installed or replaced without powering down the switch, making it ideal for environments where uptime cannot be compromised.

The MikroTik hAP ax³ (C53UiG+5HPaxD2HPaxD) is MikroTik's top-of-line home Wi-Fi 6 router — quad-core ARM64 IPQ-6010 at 864–1800 MHz, 1 GB RAM, 128 MB NAND, RouterOS v7 License 6, dual-band Wi-Fi 6 AX1800 (5 GHz QCN-5052 1200 Mbps 5.5 dBi + 2.4 GHz QCN-5022 574 Mbps 3.3 dBi), RP-SMA external antenna ports, 4× Gigabit Ethernet, 1× 2.5G Ethernet (PoE-in passive 18–28V), passive PoE-out on Ether1 (15W max), USB 3.0 Type-A 1.5A, DC jack 12–28V, 38W max, passive cooling, IP20, -40°C to +70°C, MTBF ~200,000 hours. CE, FCC, IC, EAC, RoHS certified. Includes 24V 1.5A adapter, HGO indoor antenna kit, K-47 wall mount set, hAP case base. USD 139.00.

The MikroTik netPower Lite 7R (CSS610-1Gi-7R-2S+OUT) is an outdoor reverse PoE switch designed for MikroTik's GPEN concept — Marvell 88E6193X switch chip, SwitchOS Lite, 8× GbE (7× reverse PoE-in 12–57V passive + 1× passive PoE-out) + 2× SFP+ 10G, 28 Gbps non-blocking throughput, 56 Gbps switching capacity, 41.7 Mpps forwarding rate, triple power input (DC jack, passive PoE-in, 2-pin terminal, all 12–57V), 29W max / 7W without attachments, passive cooling, IP54, 303.5 × 211.9 × 71.3 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set and 2× hose clamps. Power supply not included.