Hardware

wAP LR9 kit is an out-of-the-box gateway solution for LoRa® technology, operating in the 902-928 MHz frequency range. It includes a weatherproof access point with a 2.4 GHz WLAN interface and an Ethernet port, pre-configured for seamless connectivity to public or private LoRa® servers.

The MikroTik wAP LR8G kit (RBwAPR-2nD&R11e-LR8G) is a compact weatherproof outdoor LoRa gateway — QCA9531 single-core MIPSBE at 650 MHz, 64 MB RAM, 16 MB flash, RouterOS v7 License 4, 868 MHz LoRa module (enhanced Rx sensitivity, MiniPCI-e slot), built-in GPS (uUFL connector), 2.4 GHz 802.11b/g/n 2×2 MIMO Wi-Fi 4 (300 Mbps, 2 dBi), 1× 10/100 Ethernet, passive PoE-in (9–30V), DC jack (9–30V), automotive input (12–30V), 1× Mini SIM slot, PCB temperature + voltage monitors, passive cooling, IP54, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. The Things Network ready. Includes 24V 0.8A adapter, K-52 fastening set, desktop stand, ceiling mount bracket, metal ring, PoE injector, 0.35m automotive adapter cable.

The QRT 5 is a rugged outdoor flat-panel antenna with an integrated high-power 5GHz dual-chain wireless transmitter. Featuring a 24dBi antenna and a Gigabit Ethernet port, it is perfect for point-to-point links requiring reliable and high-speed connectivity.

The MikroTik wAP LR8G Kit is a compact, weatherproof outdoor LoRa® gateway combining 868 MHz LoRa® connectivity, 2.4 GHz Wi-Fi, an integrated GPS chip, and a 10/100 Ethernet port in a durable, IP54-rated enclosure. Running RouterOS v7 and compatible with The Things Network, it is designed for easy deployment of wide-area IoT networks in demanding outdoor environments. The kit includes everything needed to get started, including a PoE injector, power adapter, mounting hardware, and an automotive power adapter cable.

The MikroTik wAP LR2 kit (RBwAPR-2nD&R11e-LR2) is an outdoor 2.4 GHz LoRa® IoT gateway — R11e-LR2 miniPCIe LoRa card (2.4 GHz Chirp spread spectrum, 4.7 dBi built-in LoRa antenna), pre-installed UDP packet forwarder to public or private LoRa servers, single-core MIPSBE QCA9531 at 650 MHz, 64 MB RAM, 16 MB FLASH, RouterOS v7 License 4, 2.4 GHz 802.11b/g/n Wi-Fi 4 2-chain 300 Mbps backend (2 dBi built-in WLAN antenna), 1× 10/100 Ethernet with passive PoE-in (9–30V), DC jack 9–30V, automotive input 9–30V, 1× Mini SIM slot, 1× miniPCIe slot, passive cooling, IP54, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS certified. Includes PoE injector, 24V 0.8A power adapter, wAP desktop stand, hose clamp, K-52 fastening set. 

The MikroTik LHG 60G is a high-speed outdoor 60 GHz CPE unit designed for Point-to-Multipoint wireless deployments. Built around the 802.11ad standard, it is purpose-built for environments where 2.4 GHz and 5 GHz spectrum is congested and unreliable, offering an interference-free 60 GHz alternative with data rates up to 2 Gbps. Up to eight LHG 60G units can connect simultaneously to a compatible 60 GHz access point, such as the wAP 60G AP or wAP 60Gx3 AP, with a maximum P2MP range of 800 metres and P2P range of up to 1,500 metres. The unit features a built-in grid antenna, a single Gigabit Ethernet PoE port, passive cooling, an IP55 weatherproof enclosure, and an operating temperature range of -40°C to +70°C. It runs RouterOS Level 3 on a quad-core ARM processor. 

The NetMetal 5 is a rugged, dual-chain 5GHz wireless device with 802.11a/n/ac support. It features a miniPCI-e slot, Gigabit Ethernet, external RP-SMA antenna connectors, and a waterproof metal enclosure for demanding outdoor applications.

The MikroTik FTC11XG is a weatherproof IP55 10 Gigabit fiber-to-copper media converter — 1× SFP+ 10G fiber input, 1× 10/100/1000/10G RJ45 Ethernet output, Marvell 88E6193 switch chip, SwitchOS Lite with VLAN, SNMP, ACL, and traffic shaping, 64 KB FLASH, dual power input (DC jack 18–57V, 802.3bt PoE-in 43–57V), passive cooling, IP55, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes K-81 fastening set, 48V 0.95A power adapter, Gigabit PoE injector. The correct managed 10G fiber-to-copper converter for outdoor, ceiling-mount, and harsh-environment deployments where a 10G SFP+ fiber run must terminate to a 10G RJ45 device without a full switch layer, with VLAN, ACL, and SNMP management built in.

The MikroTik OmniTIK 5 PoE ac (RBOmniTikPG-5HacD) is a significant upgrade to MikroTik's popular OmniTIK 5GHz access point line, combining an integrated 7.5 dBi omnidirectional antenna with 802.11ac (Wi-Fi 5) wireless performance in a weather-resistant outdoor enclosure. Built around a dual-chain 5GHz radio capable of up to 867 Mbit/s, it features five Gigabit Ethernet ports — four of which support 802.3af/at PoE output — making it ideal for powering additional devices directly from the unit. Running MikroTik's RouterOS, the OmniTIK 5 PoE ac suits network installers, ISPs, and enterprises looking for a versatile outdoor access point that also serves as a compact PoE distribution hub in a single, pole-mountable unit.

The MikroTik SXT SA5 ac (RBSXTG-5HPacD-SAr2) is a high-output 5GHz 802.11ac outdoor wireless device featuring an integrated wide-beamwidth 90° sector antenna. Designed for both access point and CPE applications, it delivers up to 867 Mbit/s over the air using the 802.11a/n/ac standard set, making it well suited as a drop-in upgrade for existing 5GHz 802.11a/n deployments. Compact and weather-resistant (IP54), the SXT SA5 ac is powered via PoE, runs MikroTik RouterOS with a Level 4 licence, and comes ready to pole-mount straight out of the box. It is an ideal choice for ISPs, wireless network operators, and system integrators needing reliable, high-throughput sector coverage in a cost-effective outdoor unit.