Hardware

The MikroTik hEX S (2025) (E60iUGS) is the most capable compact wired router MikroTik has built a ground-up 2025 refresh with a new dual-core EN7562CT ARM CPU at 950 MHz, 512 MB RAM, EN7523 switch chip, 5× Gigabit Ethernet (PoE-in on Ether1, Passive PoE-out on Ether5), a 2.5G SFP cage for multi-gigabit uplinks, USB 3.0 with USB Power Reset, flexible dual power inputs (DC jack and 802.3af/at PoE-in, 12–57V), wall-mountable design, and RouterOS v7 License Level 4. For home labs, smart offices, small businesses, and anyone with a multi-gigabit fiber plan who needs a proper router — not an ISP plastic box, the hEX S 2025 is the answer.

The S+RJ10 is a 6-speed RJ-45 module supporting up to 10 Gbps connectivity. It allows MikroTik devices with SFP+ ports to achieve high-speed connections using familiar twisted-pair Ethernet cables, eliminating the need for optical fiber.

Dual chain 21dBi 5GHz CPE/Point-to-Point Integrated Antenna, 600Mhz CPU, 64MB RAM

The MikroTik hEX refresh is a refreshed iteration of MikroTik's popular hEX router, delivering significantly improved performance at the same accessible price point. Powered by a dual-core ARM processor and upgraded to 512 MB of RAM, it offers performance gains of up to 100–134% compared to its predecessor. With 5 Gigabit Ethernet ports, a USB port, passive PoE input, and RouterOS v7, the hEX refresh is an excellent choice for home users, small businesses, and network professionals looking for capable, cost-effective wired routing.

The MikroTik hEX is a compact and powerful five-port Gigabit Ethernet router. With a dual-core 880MHz CPU, 256MB RAM, USB, and microSD slot, it delivers exceptional performance for advanced configurations without wireless connectivity.

The MikroTik GPeRx4 is a compact, IP68-rated outdoor PoE extender that splits a single high-power 802.3bt PoE input into three standard 802.3af/at PoE-out connections. It allows a single high-power PoE port to power multiple devices simultaneously, without the need for additional cabling infrastructure. Managed via SwOS Lite, it supports interface monitoring, VLAN configuration, traffic shaping, SNMP reporting, and fault detection — making it a smart and practical solution for outdoor PoE deployments. Note that the output ports are isolated and communicate only with the input port; this device functions as a PoE extender, not a switch.

The MikroTik XS+85LC01D is a cost-effective multimode SFP/SFP+/SFP28 transceiver module supporting 1.25G, 10G, and 25G data rates over distances of up to 100 metres via a Dual LC UPC connector. Operating at 850 nm wavelength, it is compatible with a wide range of MikroTik devices including the RB5009, CCR2116, netPower series, and various CRS and CSS switches. Built-in digital diagnostics provide real-time monitoring of key transceiver parameters to assist with network health visibility and proactive maintenance planning.

The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.

The MikroTik XQ+DA0003 is a 3-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. It is designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices such as the CCR2216, CRS504, CRS518, CRS510, and CRS520, offering a latency-free, plug-and-play alternative to optical transceivers and fibre patch cables for rack-to-rack or within-cabinet connections. The 3-metre length provides enough reach to comfortably span adjacent rack units or nearby racks while keeping cable management tidy and installations clean.

RBM33G: A powerful OEM RouterBOARD with three Gigabit Ethernet ports, two miniPCIe slots, and robust expansion capabilities. Perfect for custom enclosures and versatile networking setups, including multiple 3G/LTE modem configurations.