Hardware

The MikroTik CRS520-4XS-16XQ-RM is a high-density, enterprise-grade 100G core switch combining the switching power of a Marvell 98CX8410 chip with the processing muscle of a quad-core 64-bit ARM CPU running at 2 GHz and 4 GB of RAM. It provides 16 × 100G QSFP28 ports, 4 × 25G SFP28 ports, and 2 × 10G Ethernet ports, running RouterOS v7 for advanced Layer 2 and Layer 3 network management. Two hot-swap power supplies and four hot-swap fans are included as standard, making it a resilient, future-proof solution for data centre and enterprise core network deployments.

The MikroTik ROSE Data Server (RDS2216) is a 1U rackmount enterprise platform that converges 100G networking, 20-bay U.2 NVMe storage, and OCI container compute into a single device — eliminating the cost, complexity, and power overhead of separate storage, networking, and compute infrastructure. Powered by a 16-core AL73400 ARM64 CPU at 2 GHz, 32 GB DDR4 RAM, dual hot-swap PSUs (max 286W), 2× 100G QSFP28, 4× 25G SFP28, 4× 10G SFP+, 2× 10G Ethernet, and the special ROSE edition of RouterOS v7 License Level 6 — it runs MinIO, Nextcloud, PostgreSQL, RAID, NVMe-TCP, iSCSI, BTRFS, and TCG-Opal self-encrypting drives with no subscriptions, no paywalls, and no vendor lock-in. You buy it. You own it. Forever.

The MikroTik CRS518-16XS-2XQ-RM is an enterprise-grade 1U rack-mount switch delivering 16× 25 Gigabit SFP28 ports and 2× 100 Gigabit QSFP28 ports, all driven by the Marvell Prestera Aldrin2 (98DX8525) switch chip with a non-blocking switching fabric of up to 1.2 Tbps. The 25G SFP28 ports are fully backward compatible with 10G and 1G SFP devices. Dual hot-swap power supplies with a 100–240 V AC input range and four active cooling fans ensure reliable operation in demanding data centre and enterprise deployments. Running RouterOS v7 with a Level 6 licence, it supports VLAN (802.1Q, 802.1ad), L3 hardware offloaded routing, ACL, LACP, MLAG, and Jumbo frames — making it a powerful and cost-effective core or aggregation switch for high-density 25G and 100G networks.

The MikroTik CRS804 DDQ (CRS804-4DDQ-hRM) is a compact 1U 400G switch built for AI clusters, storage fabrics, and high-speed aggregation. It features four 400G QSFP56-DD ports with flexible breakout down to 1G, dual 1G/10G Ethernet, a Marvell 98DX7335 switch chip, quad-core 2 GHz ARM CPU, 4 GB DDR4 RAM, dual hot-swap redundant power supplies, and two hot-swap cooling fans — all at 123W max power consumption. Runs RouterOS v7 with License Level 6.

The MikroTik CRS812 DDQ (CRS812-8DS-2DQ-2DDQ-RM) is a high-performance 1U rackmount aggregation switch that brings 50G, 200G, and 400G connectivity to data centres, campus cores, and service provider networks at an accessible price point. Powered by a Marvell 98DX7335 switch chip and a quad-core 2 GHz ARM64 CPU with 4 GB of RAM, it features eight 50G SFP56 ports, two 200G QSFP56 ports, two 400G QSFP56-DD ports, and two 1G/10G Ethernet ports — with full QSFP56/QSFP-DD breakout support down to 1G/2.5G/5G/10G/25G/50G. Equipped with dual hot-swap redundant power supplies, four hot-swap cooling fans, and RouterOS v7, the CRS812 DDQ is designed for top-of-rack, leaf, and aggregation roles in modern high-speed network environments.

The MikroTik CRS326-4C+20G+2Q+RM is a high-density rack-mounted switch designed for environments where 2.5 Gigabit connectivity is essential, such as offices, studios, and professional environments transitioning to multi-gigabit speeds. It delivers 20 × 2.5G Ethernet ports, 4 × Combo ports (2.5G Ethernet or 10G SFP+), 2 × 40G QSFP+ uplink ports, a dedicated 100 Mbps management port, and dual-redundant hot-swap power supplies. Running both RouterOS v7 and SwitchOS, it combines powerful Layer 2/Layer 3 switching with flexible management options.

The MikroTik CRS354-48P-4S+2Q+RM is a high-density 1U rackmount dual-boot PoE switch — QCA9531 single-core MIPSBE at 650 MHz, 128 MB RAM, 32 MB flash, RouterOS v7 License 5 or SwitchOS, 48× GbE 802.3af/at PoE-out (auto-sensing + passive PoE + low voltage PoE) + 4× SFP+ 10G + 2× QSFP+ 40G, 168 Gbps non-blocking throughput, 336 Gbps switching capacity, 235 Mpps forwarding rate, 1× AC input 100–240V, 700W total PoE output, 800W max / 85W without attachments, 4 fans, RJ45 serial console, IP20, 443 × 382 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes IEC cord, cable management brackets, rackmount ears, rear support ears, K-48 fastening set. Free software updates for life of product or minimum 5 years from purchase.

The MikroTik CCR2116-12G-4S+ is a 1U rack-mount ISP edge router — Amazon Annapurna Labs AL73400 16-core ARM64 at 2,000 MHz, Marvell Aldrin 98DX3255 switch chip (L3 hardware offloading, 4× 10G CPU lines), 16 GB DDR4 RAM, 128 MB NAND, 1× M.2 PCIe slot, RouterOS v7 License 6, 12× GbE (switch chip) + 1× GbE (direct CPU management), 4× SFP+ (10G), RJ45 serial console, 2× AC PSU (100–240V, 47–63 Hz), 4 fans, 83W max / 60W without attachments, CPU + PCB + voltage monitors, mode button, 443 × 199 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 2× IEC cord, rack bracket, K-57 kit. USD 995.00.

The MikroTik CRS504-4XQ-IN is a compact 100G switch — Marvell 98DX4310 switch ASIC, QCA9531 management CPU (MIPSBE, 650 MHz), 64 MB RAM, 16 MB FLASH, RouterOS v7 License 5, 4× QSFP28 (100G, breakout-capable to 16× 25G), 1× 10/100 Ethernet (management), RJ45 serial console, 2× AC hot-swap PSU slots (100–240V), 3× DC inputs (DC jack 36–57V + 802.3bt PoE-in 43–57V + 2-pin terminal 36–57V), 2 fans, 41W max / 25W without attachments, PCB temperature monitor, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, K10 screw kit, 2× IEC cord. USD 799.00.

The MikroTik CRS312-4C+8XG-RM is a rackmount switch featuring 8x 10G RJ45 ports, 4 combo 10G SFP+/RJ45 ports, dual power supplies, and robust performance for high-speed networks.