Hardware

The quickMOUNT pro (QMP) is an advanced wall mount adapter designed for precise alignment of small point-to-point and sector antennas, with a 140° adjustment range and exceptional durability.

The MikroTik HGO-LTE-W is a single broadband combo antenna covering 699 MHz – 3.8 GHz — replacing separate LTE and LoRa® antennas with one 1.5–4 dBi SMA male element rated for indoor and outdoor use from -40°C to +70°C. Designed for the MikroTik KNOT LR8 and LR9 kits, it supports LTE/5G, CAT-M1/NB-IoT, 868 MHz LoRa®, and 915 MHz LoRa® — including the Canadian 915 MHz LoRa® band — from a single antenna connection. It is the correct single-antenna solution for any KNOT kit deployment where simplicity, cost, and space matter more than maximum gain.

ACGPSA is an active GPS antenna specifically designed for the LtAP series products. Operating in the 1575.4 MHz spectrum, this IP67-rated antenna ensures reliable GPS connectivity in diverse environments, offering versatile installation options and a long 5-meter cable with an SMA connector.

The Flex-guide is a premium 50cm low-loss RPSMA cable designed for superior signal quality, featuring silver-plated copper and soldered connections for both indoor and outdoor applications.

The 18POW is a reliable 24V 0.8A power adapter, ideal for MikroTik routers and devices with low power consumption, ensuring stable and efficient performance.

The MikroTik GPeR-IP67-Case is a weatherproof outdoor enclosure designed exclusively for GPeR units — IP68 rated (dust-tight and submersion-proof despite the IP67 name on the label), wall and pole mountable, suitable for extending Ethernet networks in mines, caves, maintenance shafts, and outdoor installations. Product code GPeR-IP67-Case. EAN 4752224008374. No active electronics — passive mechanical enclosure accessory. MTBF approximately 100,000 hours at 25°C. Dimensions not published by MikroTik.

The RBPOE is a cost-effective passive PoE injector designed for powering 10/100Mbps RouterBOARD devices. It simplifies installations by reducing the number of cables required.

The MikroTik CRS520-4XS-16XQ-RM is a high-density, enterprise-grade 100G core switch combining the switching power of a Marvell 98CX8410 chip with the processing muscle of a quad-core 64-bit ARM CPU running at 2 GHz and 4 GB of RAM. It provides 16 × 100G QSFP28 ports, 4 × 25G SFP28 ports, and 2 × 10G Ethernet ports, running RouterOS v7 for advanced Layer 2 and Layer 3 network management. Two hot-swap power supplies and four hot-swap fans are included as standard, making it a resilient, future-proof solution for data centre and enterprise core network deployments.

The MikroTik CRS804 DDQ (CRS804-4DDQ-hRM) is a compact 1U 400G switch built for AI clusters, storage fabrics, and high-speed aggregation. It features four 400G QSFP56-DD ports with flexible breakout down to 1G, dual 1G/10G Ethernet, a Marvell 98DX7335 switch chip, quad-core 2 GHz ARM CPU, 4 GB DDR4 RAM, dual hot-swap redundant power supplies, and two hot-swap cooling fans — all at 123W max power consumption. Runs RouterOS v7 with License Level 6.

The MikroTik CRS812 DDQ (CRS812-8DS-2DQ-2DDQ-RM) is a high-performance 1U rackmount aggregation switch that brings 50G, 200G, and 400G connectivity to data centres, campus cores, and service provider networks at an accessible price point. Powered by a Marvell 98DX7335 switch chip and a quad-core 2 GHz ARM64 CPU with 4 GB of RAM, it features eight 50G SFP56 ports, two 200G QSFP56 ports, two 400G QSFP56-DD ports, and two 1G/10G Ethernet ports — with full QSFP56/QSFP-DD breakout support down to 1G/2.5G/5G/10G/25G/50G. Equipped with dual hot-swap redundant power supplies, four hot-swap cooling fans, and RouterOS v7, the CRS812 DDQ is designed for top-of-rack, leaf, and aggregation roles in modern high-speed network environments.