Hardware

TG-LR82 is a compact LoRaWAN multi-sensor device with temperature, humidity, motion, and event detection, designed for long-range IoT monitoring with low power consumption and flexible automation.

The MikroTik MT-HotSwapFan-V2 is a hot-swappable replacement fan module designed exclusively for the CRS804 DDQ switch. It allows a failed or aging fan to be replaced without powering down the switch, eliminating downtime in environments where continuous operation is critical. Ideal for AI clusters, storage networks, and high-speed backbone deployments where sustained airflow and cooling reliability cannot be compromised.

The RB4011 Wall Mount Kit is a secure mounting solution designed to protect your RB4011 router and its Ethernet ports in public or high-traffic areas, preventing unauthorized access and accidental disconnections.

CCR3232-16XG-4DS-2DQ is a high-performance Cloud Core Router powered by Ampere CPUs, offering 200G/400G connectivity, advanced routing features, and scalable performance for modern data center and ISP networks.

The MikroTik Chateau LTE18 ax is the Generation 6 flagship home and office LTE router — CAT18 LTE delivering up to 1.2 Gbps downlink with 4×4 MIMO, dual-band Wi-Fi 6 (574 Mbps at 2.4 GHz, 1,200 Mbps at 5 GHz), four Gigabit Ethernet ports plus a 2.5 Gigabit Ethernet port, 4 built-in LTE antennas with 2 optional external antenna ports, quad-core ARM64 IPQ-6010 at 1.8 GHz, 1 GB RAM, WPA3, USB-A, RouterOS v7 License 4, -40°C to +65°C. Single DC jack input (12–28V), passive cooling, 19W max, 240 × 156 × 44 mm. Includes 24V 1.2A adapter and 1.5m UTP flat cable. The complete LTE home router for households and small offices replacing fixed broadband with a single, elegant device.

The MikroTik Wireless Wire nRAY (nRAYG-60adpair) is a kit of two pre-paired 60 GHz point-to-point devices — 88F3720 dual-core ARM64 at 1 GHz per unit, 256 MB RAM, 16 MB flash, RouterOS v7 License 3, AES-encrypted wireless link, up to 2 Gbps aggregate throughput at distances up to 1,500 m, 1× GbE per unit (802.3af/at PoE-in, 12–57V), 7W max per unit, passive cooling, IP55, snow-resistant form factor, fine-tune alignment screws, 261 × 166 mm per unit, -30°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 2× 24V 0.38A power adapter, 2× Gigabit PoE injector, 2× nRAY solidMOUNT pole adapter, 2× nRAY aiming tool. Pre-configured — plug in and point.

Wireless Wire Dish: Achieve 2 Gbps aggregate speeds over a distance of up to 1.5 km! A revolutionary 60 GHz wireless solution offering fiber-like quality and stability at a fraction of the cost.

The MikroTik LHG LTE18 kit is a CAT18 LTE outdoor router with a built-in 17 dBi high-gain grid antenna — delivering download speeds up to 1.2 Gbps and uploads up to 150 Mbps via carrier aggregation, from locations where standard routers and phones have no usable signal. Powered by 802.3af/at PoE-in (12–57V), running RouterOS v7 on a dual-core 64-bit ARM CPU at 800 MHz with 256 MB RAM, IP54-rated, and rated from -40°C to +70°C. Includes Gigabit PoE injector, 24V adapter, hose clamps, and screw kit. The correct last-mile LTE solution for remote sites, rural properties, and any location where cable or fibre infrastructure is absent.

The MikroTik ATL LTE18 kit is a high-performance outdoor LTE Category 18 router designed for demanding mobile broadband deployments where signal strength, stability, and throughput are critical. Built around a 64-bit ARM processor and powered by a Cat18 modem capable of up to 1.2 Gbps downlink and 150 Mbps uplink, it features 4×4 MIMO on the downlink with a suite of six integrated high-gain antennas — four covering the middle band (1.7–2.7 GHz) and two covering the low band (700 MHz–1 GHz, including LTE Band 28). Its distinctive aerodynamic enclosure is IP54-rated for outdoor use and engineered to shed snow and water in harsh weather. The unit is powered via a single 802.3af/at PoE input, ships with RouterOS v7.

The MikroTik G1270 is a 750W open-frame replacement power supply unit for the MikroTik CRS354-48P-4S+2Q+RM switch — delivering dual-rail DC output at 53Vdc 13.5A and 26.5Vdc 27A from a universal 90–264Vac input, with ~200,000-hour MTBF at 25°C. The correct replacement PSU to stock alongside any CRS354-48P-4S+2Q+RM deployment where power supply failure must not result in switch downtime or a cross-border parts sourcing delay.