Hardware

The MikroTik CSS318-16G-2S+IN is a compact, passively cooled managed switch featuring 16 Gigabit Ethernet ports and 2 SFP+ 10G uplink ports, running MikroTik's lightweight SwOS operating system. Housed in a 10-inch form factor chassis that also fits 19-inch racks, it is ideal for deployments where 24 ports are too many and 8 ports simply are not enough. With browser-based configuration, broad SwOS feature support, and very low power consumption, it offers a practical and scalable solution for small to medium network environments.

The MikroTik G1483-0600WNB is a 600W hot-swap replacement or expansion power supply unit designed exclusively for the CRS320-8P-8B-4S+RM PoE++ switch. The CRS320 ships with a single 600W PSU as standard, and includes an expansion slot for a second PSU — adding this unit raises the total combined power output to 1150W, enabling up to 90W per PoE++ port. As a hot-swap unit, it can be installed or replaced without powering down the switch, making it ideal for environments where uptime cannot be compromised.

The MikroTik hAP ax³ (C53UiG+5HPaxD2HPaxD) is MikroTik's top-of-line home Wi-Fi 6 router — quad-core ARM64 IPQ-6010 at 864–1800 MHz, 1 GB RAM, 128 MB NAND, RouterOS v7 License 6, dual-band Wi-Fi 6 AX1800 (5 GHz QCN-5052 1200 Mbps 5.5 dBi + 2.4 GHz QCN-5022 574 Mbps 3.3 dBi), RP-SMA external antenna ports, 4× Gigabit Ethernet, 1× 2.5G Ethernet (PoE-in passive 18–28V), passive PoE-out on Ether1 (15W max), USB 3.0 Type-A 1.5A, DC jack 12–28V, 38W max, passive cooling, IP20, -40°C to +70°C, MTBF ~200,000 hours. CE, FCC, IC, EAC, RoHS certified. Includes 24V 1.5A adapter, HGO indoor antenna kit, K-47 wall mount set, hAP case base. USD 139.00.

The MikroTik netPower Lite 7R (CSS610-1Gi-7R-2S+OUT) is an outdoor reverse PoE switch designed for MikroTik's GPEN concept — Marvell 88E6193X switch chip, SwitchOS Lite, 8× GbE (7× reverse PoE-in 12–57V passive + 1× passive PoE-out) + 2× SFP+ 10G, 28 Gbps non-blocking throughput, 56 Gbps switching capacity, 41.7 Mpps forwarding rate, triple power input (DC jack, passive PoE-in, 2-pin terminal, all 12–57V), 29W max / 7W without attachments, passive cooling, IP54, 303.5 × 211.9 × 71.3 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-66 fastening set and 2× hose clamps. Power supply not included.

wAP 60G AP: A weatherproof, integrated 60 GHz Base Station with 60° beamforming antenna. Supports up to 8 simultaneous clients for indoor or outdoor Point-to-Multipoint, Point-to-Point, or CPE setups.

The MikroTik L009UiGS-2HaxD-IN is a compact indoor ARM router with integrated 2.4 GHz Wi-Fi 6 — dual-core ARM32 IPQ-5018 at 800 MHz, Marvell 88E6190 switch chip, 512 MB RAM, 128 MB NAND, RouterOS v7 License 5, 2.4 GHz 802.11b/g/n/ax Wi-Fi 6 AX600 2-chain 574 Mbps (IPQ-5018, 4 dBi external RP-SMA antennas via HGO indoor antenna kit), 8× Gigabit Ethernet (Ether1: 802.3af/at PoE-in 24–56V; Ether8: passive PoE-out 1A), 1× SFP port (2.5G supported), 1× USB 3.0 Type-A (max 1.5A, USB Power Reset), RJ45 serial console, DC jack 24–56V, 47W max consumption, passive cooling (heatsink enclosure), IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS certified. Includes 24V 1.5A power adapter, HGO indoor antenna kit, K-55 screw kit. 

The MikroTik cAP ax (cAPGi-5HaxD2HaxD) is the Wi-Fi 6 generation of MikroTik's best-selling ceiling access point — dual-band AX1800, 2.4 GHz 802.11b/g/n/ax 2-chain 574 Mbps 6 dBi (QCN-5022) + 5 GHz 802.11a/n/ac/ax 2-chain 1,200 Mbps 5.5 dBi (QCN-5052), IPQ-6010 quad-core ARM64 at 864–1,800 MHz (auto), IPQ-6010 integrated switch, 1 GB RAM, 128 MB NAND, RouterOS v7 License 4, 2× Gigabit Ethernet (Ether1: 802.3af/at PoE-in 18–57V; Ether2: passive PoE-out up to 57V), DC jack 18–57V, 36W max consumption, passive cooling, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS certified. Includes 48V 0.95A power adapter, Gigabit PoE injector, K-81 fastening set, cAP ax ceiling bracket, cAP ax ceiling mount.

The MikroTik SXT LTE7 Kit (SXTR&R11e-LTE7) is a rugged, weatherproof outdoor LTE CPE that upgrades the proven SXT enclosure with the R11e-LTE7 Cat7 modem — delivering faster uploads, carrier aggregation, and expanded band support including B28 and B32. It features 2× Micro-SIM slots for backup and roaming flexibility, PoE-in on Ether1 and PoE-out on Ether2, a wide 12–57V power range, 1× MiniPCIe expansion slot, IP54 weatherproofing, and RouterOS v7 — purpose-built for farms, countryside estates, off-grid connections, and any remote location still within LTE coverage.

The MikroTik Chateau LTE7 (D53G-5HacD2HnD-TC&R11e-LTE7) is an affordable, elegantly designed home and small office LTE Cat7 router — keeping the signature Chateau aesthetic and quad-core IPQ-4019 platform while upgrading to the R11e-LTE7 modem for faster uploads, Band 28, and carrier aggregation at a lower price than the previous LTE6 model. It features dual-band Wi-Fi 5 (300 Mbps at 2.4 GHz + 867 Mbps at 5 GHz), 5× Gigabit Ethernet ports, 1× Micro SIM slot, 1× USB-A port, 256 MB RAM, and full RouterOS v7 — purpose-built for households and small businesses that want reliable LTE connectivity without ISP-supplied equipment.

The MikroTik L009UiGS-RM is a compact rackmount ARM router — dual-core ARM32 IPQ-5018 at 800 MHz, Marvell 88E6190 switch chip, 512 MB RAM, 128 MB NAND, RouterOS v7 License 5, 8× Gigabit Ethernet ports (Ether1: 802.3af/at PoE-in 24–56V; Ether8: passive PoE-out 1A), 1× SFP port (2.5G supported), 1× USB 3.0 Type-A (max 1.5A, USB Power Reset), RJ45 serial console, DC jack 24–56V, 40W max consumption, passive cooling (heatsink enclosure), IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes 24V 1.5A power adapter, rackmount kit K-79, K-55 screw kit, K-87, adhesive pads.