CCR Series

The MikroTik CCR2216-1G-12XS-2XQ is MikroTik's flagship cloud core router — Amazon Annapurna Labs AL73400 16-core ARM64 at 2,000 MHz, Marvell Prestera Aldrin2 98DX8525 switch chip (L3 hardware offloading, 4× 25G CPU lines), 16 GB DDR4 RAM, 128 MB NAND, 2× M.2 SATA slots, RouterOS v7 License 6, 12× SFP28 (25G), 2× QSFP28 (100G), 1× GbE, RJ45 serial console, 2× hot-swap AC PSU (100–240V, 50–60 Hz), 4× hot-swap fans, 128W max / 80W without attachments, CPU + PCB + voltage monitors, IP20, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 2× IEC cord, rack ears, cable management brackets, K-82 fastening set. USD 2,795.00.

The MikroTik CCR2116-12G-4S+ is a 1U rack-mount ISP edge router — Amazon Annapurna Labs AL73400 16-core ARM64 at 2,000 MHz, Marvell Aldrin 98DX3255 switch chip (L3 hardware offloading, 4× 10G CPU lines), 16 GB DDR4 RAM, 128 MB NAND, 1× M.2 PCIe slot, RouterOS v7 License 6, 12× GbE (switch chip) + 1× GbE (direct CPU management), 4× SFP+ (10G), RJ45 serial console, 2× AC PSU (100–240V, 47–63 Hz), 4 fans, 83W max / 60W without attachments, CPU + PCB + voltage monitors, mode button, 443 × 199 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes 2× IEC cord, rack bracket, K-57 kit. USD 995.00.

The MikroTik CCR2004-1G-12S+2XS is a 1U rackmount cloud core router — AL32400 quad-core ARM64 at 1,700 MHz, 4 GB ECC RAM, 128 MB NAND flash, RouterOS v7 License 6, 1× GbE + 12× SFP+ 10G + 2× SFP28 25G, RJ45 serial console, dual redundant AC input (100–240V, 2× IEC cords), 60W max / 31W without attachments, 2 fans, IP20, 443 × 224 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Highest single-core performance in the CCR2004 family — up to 3.4 Gbps single IPsec tunnel, strong BGP feed processing. Includes 2× IEC cords, K10 screw and feet kit, rackmount bracket. Free software updates for life of product or minimum 5 years from purchase.

The MikroTik CCR2004-16G-2S+PC is a passively cooled cloud core router — quad-core ARM64 Amazon Annapurna Labs AL32400 (Alpine v2) at 1.2 GHz, 2× Marvell 88E6191 switch chips, 4 GB DDR4 RAM, 128 MB NAND, RouterOS v7 License 6, 16× Gigabit Ethernet (2× groups of 8, each with dedicated 10G CPU uplink), 2× SFP+ (10G), RJ45 serial console, 1× USB, 2× DC inputs (DC jack + 2-pin terminal, 36–57V), 36W max / 30W without attachments, fully passive cooling, IP20, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes rack ears, 48V 0.95A adapter, K-83 kit. USD 465.00.

The MikroTik CCR2004-16G-2S+ is a 1U rack-mount SMB router — Annapurna Labs AL32400 quad-core ARMv8 Cortex-A57 at 1,700 MHz, Marvell 88E6191X switch chip (two groups of 8× GbE each on a dedicated 10 Gbps full-duplex line to CPU), 4 GB DDR4 RAM, 128 MB NAND, RouterOS v7 License 6, 16× GbE + 2× SFP+ 10G, RJ45 serial console, USB, dual redundant AC PSU (100–240V, 50–60 Hz), 2 fans, 48W max / 35W without attachments, CPU + PCB + voltage monitors, 443 × 210 × 44 mm, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS. Includes rack ears, 2× IEC cord, K-57 kit. USD 465.00.

The MikroTik CCR2004-1G-2XS-PCIe is a PCIe network interface card with a full RouterOS v7 router on-card — Amazon Annapurna Labs AL52400 quad-core ARM64 at 1,500 MHz, 4 GB DDR4 RAM, 128 MB NAND, RouterOS v7 License 6, 2× SFP28 (25G), 1× GbE (management), 4 virtual PCIe Ethernet interfaces (2× passthrough to SFP28 + 2× bridged to GbE), wire-speed 100 Gbps with jumbo frames, 1 fan, 29W max / 22W without attachments, CPU + PCB + voltage + current monitors, IP20, -20°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes small and large brackets. USD 199.00.

The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. USD 59.00. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.

The MikroTik XQ+DA0003 is a 3-metre passive direct attach copper (DAC) twinax cable with integrated QSFP28/QSFP+ connectors — dual-rate 100G (QSFP28-to-QSFP28) and 40G (QSFP+-to-QSFP+), no optical transceivers, no fiber, plug-and-play copper interconnect. Compatible with MikroTik CCR2216, CRS504-4XQ-IN/OUT, CRS510-8XS-2XQ-IN, CRS518-16XS-2XQ-RM, and any IEEE 100GBASE-CR4 / 40GBASE-CR4 compliant QSFP28 or QSFP+ port. Flexible twinax construction. MTBF ~100,000 hours at 25°C. No certifications listed (passive copper assembly). USD 59.00.

The S+AO0005 is a 5-meter SFP+ Active Optics direct attach cable that supports 10Gbps connectivity. It provides a cost-effective solution for connecting two SFP/SFP+ devices within or across adjacent racks.

The MikroTik XQ+DA0001 is a 1-metre passive direct attach copper (DAC) twinax cable with integrated QSFP28/QSFP+ connectors — dual-rate 100G (QSFP28-to-QSFP28) and 40G (QSFP+-to-QSFP+), no optical transceivers, no fiber, plug-and-play copper interconnect. The 1m sibling to the XQ+DA0003 (3m, USD 59.00) — correct for side-by-side rack unit or same-shelf installations where a 3m cable would add unnecessary slack. Compatible with MikroTik CCR2216, CRS504-4XQ-IN/OUT, CRS510-8XS-2XQ-IN, CRS518-16XS-2XQ-RM. MTBF ~100,000 hours at 25°C. No certifications listed (passive copper assembly). USD 39.00.