100G QSFP28 DAC

The 100G QSFP28 DAC stands at the forefront of data transfer solutions, delivering a striking speed of 100Gbps. Housed in the QSFP28 form factor, it showcases four channels, each proficient at a 25Gbps rate. This DAC is emblematic of superior bandwidth, minimal latency, and energy efficiency, making it the choice par excellence for data center and server interconnections.

 Show Moreexpand_more
 Show Lessexpand_less
SYNOXX 100G QSFP28 DAC Cable QSFP28 5m | EDQPY-5-26
New
SYNOXX 100G QSFP28 DAC Cable EDQPY-5-26 QSFP28 5m
In stock
The SYNOXX EDQPY-5-26 is a 100G QSFP28 to QSFP28 passive direct attach copper 
(DAC) cable delivering 100Gbps over a 5-metre 26AWG twinax connection — purpose-built 
for extended-rack and cross-row 100G deployments where 1m and 3m cables fall short, 
including end-of-row switch connections, long cable tray runs, and flexible spine-to-leaf 
links requiring extra reach on the passive copper budget. Based on a 4×25G architecture, 
compliant with SFF-8636 and IEEE 802.3bj, with a two-wire I2C interface for monitoring 
and control, low power consumption, and low crosstalk across the full 5m run. 
Hot-pluggable, RoHS compliant, and IC Certified.
US$96.00
ETU 100G QSFP28 TO 4X SFP28 DAC 3M
New
ETU 100G QSFP28 TO 4* SFP28 DAC 3M
Available!
High-performance 100G QSFP28 to 4x SFP28 passive DAC breakout cable designed for data center and high-speed networking applications, featuring low crosstalk, low insertion loss, and excellent signal integrity.
US$80.00
SYNOXX 100G QSFP28 to 4xSFP28 Breakout DAC 3m | EDQPY-4SP3
SYNOXX 100G QSFP28 Breakout DAC Cable EDQPY-4SP3 QSFP28 to 4×SFP28 3m
In stock
The SYNOXX EDQPY-4SP3 is a 100G QSFP28 to 4×SFP28 passive direct attach copper 
(DAC) breakout cable that splits a single 100G QSFP28 port into four independent 
25G SFP28 connections over 3 metres of twinax copper — enabling cost-effective 
25G server and storage connectivity from a 100G spine or leaf switch port without 
additional transceivers. Compliant with IEEE 802.3bj, SFF-8636, and SFF-8402 
standards, featuring EEPROM support for device identification, low insertion loss, 
and passive operation with no active components required. Hot-pluggable, RoHS 
compliant, and IC Certified.
US$80.00
ETU 100G QSFP28 TO QSFP28 DAC 3M
New
ETU 100G QSFP28 TO QSFP28 DAC 3M
Available!
High-speed 100G QSFP28 to QSFP28 DAC cable, SFF-8636 compliant, IEEE 802.3bj support, low power consumption, excellent signal integrity.
US$68.00
SYNOXX 100G QSFP28 DAC Cable QSFP28 3m | EDQPY-3
SYNOXX 100G QSFP28 DAC Cable EDQPY-3 QSFP28 3m
In stock
The SYNOXX EDQPY-3 is a 100G QSFP28 to QSFP28 passive direct attach copper (DAC) 
cable delivering 100Gbps over a 3-metre twinax connection using a 4×25G lane 
architecture — purpose-built for cross-rack and adjacent-rack 100G connections where 
1-metre cables fall short. Compliant with SFF-8636 and IEEE 802.3bj, featuring a 
two-wire I2C interface for monitoring and control, low crosstalk design, and power 
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.
US$68.00
ETU 100G QSFP28 TO QSFP28 DAC 1M
New
ETU 100G QSFP28 TO QSFP28 DAC 1M
Available!
High-speed 100G QSFP28 to QSFP28 DAC cable, SFF-8636 compliant, IEEE 802.3bj support, low power consumption, excellent signal integrity.
US$39.00
SYNOXX 100G QSFP28 DAC Cable QSFP28 1m | EDQPY-1
SYNOXX 100G QSFP28 DAC Cable EDQPY-1 QSFP28 1m
In stock
The SYNOXX EDQPY-1 is a 100G QSFP28 to QSFP28 passive direct attach copper (DAC) 
cable delivering 100Gbps data transfers over a 1-metre twinax connection using a 
4×25G lane architecture — the ideal same-rack interconnect for 100G spine-leaf 
switching environments. Compliant with SFF-8636 and IEEE 802.3bj, featuring a 
two-wire I2C interface for monitoring and control, low crosstalk, and power 
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.
US$39.00