List of products by brand MikroTik

The MikroTik G1251-0250WNA is the official 250W hot-swap replacement power supply unit for the CRS812 DDQ 400G aggregation switch. Rated at 12Vdc, 20.8A output, it is a direct drop-in spare that can be replaced on the go — no switch restart, no downtime, no service disruption. It is the correct on-site spare for any production CRS812 DDQ deployment where power supply redundancy and zero-downtime replacement are operational requirements.

The MikroTik TN19-0250-55 is the official open-frame 250W replacement power supply unit for the CRS418 series rackmount switches. Rated at 55Vdc input at 4.5A, it is a direct drop-in spare for CRS418 deployments where redundant or failed PSU modules need to be replaced without taking the switch offline. MTBF is approximately 100,000 hours at 25°C.

The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.

The MikroTik PW48V-12V85W is an open-frame DC-DC power supply designed specifically for use with MikroTik Cloud Core Routers (CCR) from revision r2 onwards. It accepts ±48V DC telecom power input (with a supported range of 36V to 57V at up to 3A) and converts it to a regulated 12V / 7A (85W) output, allowing CCR devices to be powered directly from standard telecom ±48V DC plant infrastructure. An ideal solution for ISP and carrier-grade deployments where ±48V DC power is the standard.

The R11e-5HacD is a high-performance dual-chain 802.11ac/a/n miniPCIe card designed for seamless integration with MikroTik RouterBOARDs or other compatible devices with a miniPCIe slot. Its compact design, robust performance, and intuitive LED indicators make it an ideal choice for advanced wireless setups requiring speed and precision.

The MikroTik SXTsq Lite5 is a compact, cost-effective 5GHz CPE/Backbone device with a 16dBi antenna, ideal for point-to-point links up to 12 km.

The hAP (Home Access Point) is a compact 2.4GHz wireless AP with five Ethernet ports, PoE-out on port 5, and USB support for 3G/4G connectivity. Ideal for homes and small offices.

The MikroTik TG-LR92 is a configurable LoRaWAN sensor tag for temperature, humidity, motion, tilt, event, and door or lid monitoring. It supports US915 and 2.4 GHz LoRa, LoRaWAN 1.0.4 Class A/B, IP67 enclosure, event-based telemetry, configurable profiles, and long battery life up to around 5 years depending on configuration. Ideal for IoT, logistics, storage, cold-chain, and asset monitoring.

Universal rack rails for larger MikroTik devices and deep server cabinets from 23” to 40”. The 23–40 Rack Rail R0 provides stable rear support for heavy or large-format devices where standard rack ears are not enough. It is ideal for products like RDS2216, CCR2216, CRS520, CRS354-48P, CRS812, CRS804, and future MikroTik rackmount devices.

TG-LR82 is a compact LoRaWAN multi-sensor device with temperature, humidity, motion, and event detection, designed for long-range IoT monitoring with low power consumption and flexible automation.