List of products by supplier MikroTik

The hAP ac² is a dual-concurrent wireless access point offering simultaneous 2.4GHz and 5GHz coverage, five Gigabit Ethernet ports, USB support, and IPsec hardware encryption in a compact, versatile design.

The GPEN11 is a wall-mountable power injector designed to power uplink devices with PoE. As part of the GPEN (Gigabit Passive Ethernet Network) concept, it provides a cost-effective and easily deployable alternative to traditional GPON installations.

The MikroTik netPower Lite 8P (CSS610-8P-2S+OUT) is a compact, low-cost outdoor PoE switch with an integrated UPS and smart battery charger — keeping CCTV cameras, access points, and wireless backhaul online even when the grid goes dark. It features 8× Gigabit Ethernet PoE-out (802.3af/at), 2× 10G SFP+ uplinks, 120W total PoE budget, 24–57V DC input, IP54 weatherproofing, and SwOS Lite — built for WISPs, CCTV deployments, apartment buildings, utilities, and smart-city installations.

The GESP is a Gigabit Ethernet Surge Protector housed in an IP67-rated waterproof enclosure. It safeguards network equipment from lightning and surge damage, ensuring reliable performance in outdoor and harsh conditions.

The MikroTik LHGG LTE7 Kit (LHGGR&R11e-LTE7) is a rugged outdoor LTE Cat7 router with a built-in 17 dBi directional grid antenna for last-mile internet in remote and rural locations. It delivers up to 300 Mbps downlink and 100 Mbps uplink — double the upload speed of the LTE6 predecessor — with expanded band support including B28 and B32. IP54 rated, pole or mast mountable, and operating from -40°C to +70°C, it ships with RouterOS v7 preinstalled.

The MikroTik DQ+BC0003-DS+ is a 3m passive QSFP56 breakout DAC cable that splits a single 200G port into four independent 50G connections. It replaces the XQ+BC0003-XS+ at the same price while adding 200G to 4×50G support, and retains full backward compatibility with 100G to 4×25G and 40G to 4×10G breakout modes. Purpose-built for MikroTik CRS812 DDQ and CRS804 DDQ 200G and 400G switch deployments.

SXTsq Embedded LTE4 Global is a rugged outdoor LTE device with global band support, directional antenna, and eSIM — ideal for reliable connectivity anywhere in the world.

The MikroTik GPeR-IP67-Case is a weatherproof outdoor enclosure designed exclusively for GPeR units — IP68 rated (dust-tight and submersion-proof despite the IP67 name on the label), wall and pole mountable, suitable for extending Ethernet networks in mines, caves, maintenance shafts, and outdoor installations. Product code GPeR-IP67-Case. EAN 4752224008374. No active electronics — passive mechanical enclosure accessory. MTBF approximately 100,000 hours at 25°C. Dimensions not published by MikroTik.

The MikroTik hAP ac3 (RBD53iG-5HacD2HnD) is a dual-band 802.11ac Wave 2 home router — IPQ-4019 quad-core MIPS at 716 MHz, 128 MB RAM, 16 MB flash, RouterOS v7 License 4, 5× GbE (Ether1 WAN + Ether2–5 LAN switch), 2.4 GHz 802.11b/g/n 3×3 MIMO (300 Mbps) + 5 GHz 802.11ac Wave 2 3×3 MIMO (867 Mbps), 6 internal antennas, USB 2.0 type A, PoE-out on Ether5 (up to 57V passthrough), passive cooling, 198 × 123 × 30 mm, -40°C to +70°C, MTBF ~100,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 24V 1.2A power adapter. 

The MikroTik CSS610-8G-2S+IN is a compact 10-port Layer 2 managed switch — 88E6393X switch chip, 8× GbE + 2× SFP+ 10G, 20 Gbps full-duplex switching capacity, SwOS web management interface, 1× RJ45 serial console, passive cooling, desktop or rackmount (1U with SFP+ ports facing rear), DC jack (24–57V) or 802.3af/at PoE-in on Ether1, 7.5W max without attachments, 175 × 110 × 28 mm, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Non-PoE variant of the CSS610-8P-2S+IN. Includes 24V 1A power adapter and K-55 screw set. USD 99.00.