List of products by supplier MikroTik

The MikroTik XQ+DA0001 is a 1-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. Designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices — including the CCR2216, CRS504, CRS518, CRS510, and CRS520 — it offers a plug-and-play, zero-latency alternative to fibre transceivers and patch cables for within-cabinet or same-rack connections. The 1-metre length is the ideal choice for connecting devices installed in adjacent rack units or a tightly grouped cabinet stack.

The MikroTik XQ+DA0003 is a 3-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. It is designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices such as the CCR2216, CRS504, CRS518, CRS510, and CRS520, offering a latency-free, plug-and-play alternative to optical transceivers and fibre patch cables for rack-to-rack or within-cabinet connections. The 3-metre length provides enough reach to comfortably span adjacent rack units or nearby racks while keeping cable management tidy and installations clean.

The S-RJ01 is an RJ45 SFP module supporting 10/100/1000M speeds for copper Ethernet connections. Compatible with most Gigabit SFP ports, it offers seamless integration with various networking devices.

The MikroTik XS+85LC01D is a cost-effective multimode SFP/SFP+/SFP28 transceiver module supporting 1.25G, 10G, and 25G data rates over distances of up to 100 metres via a Dual LC UPC connector. Operating at 850 nm wavelength, it is compatible with a wide range of MikroTik devices including the RB5009, CCR2116, netPower series, and various CRS and CSS switches. Built-in digital diagnostics provide real-time monitoring of key transceiver parameters to assist with network health visibility and proactive maintenance planning.

The MikroTik CRS304-4XG-IN is a compact 4-port 10 Gigabit Ethernet desktop switch and router — 4× RJ45 10GbE copper ports (no SFP, no SFP+), Marvell Prestera 98DX3236 switch chip, quad-core ARM64 AL21400 at 1,400 MHz, 1 GB RAM, 1 GB NAND, dual-boot SwOS and RouterOS v7 License 6, USB 3.0 Type-A, DC jack (18–28V), passive cooling, IP20, -20°C to +50°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes 24V 1.2A power adapter. The correct compact 10GbE desktop switch for homelab operators, small server rooms, and 10G-ready workstation deployments where RJ45 copper 10GbE connectivity is required without SFP+ cabling, transceivers, or rack infrastructure.

The MikroTik wAP ax is a compact dual-band Wi-Fi 6 outdoor and indoor access point — AX3000 with 2×2 MIMO on both 2.4 GHz (574 Mbps, IPQ-5010, 6.9 dBi) and 5 GHz (2,400 Mbps, QCN-6102, 7 dBi), dual-core ARM32 IPQ-5010 at 800 MHz, 256 MB RAM, 128 MB NAND, 2× Gigabit Ethernet ports with 802.3af/at PoE-in, DC jack (12–57V), passive cooling, IP54, -40°C to +70°C, RouterOS v7 License 4, 9W max. WPA3/OWE, CAPsMAN-ready, fast roaming. CE, FCC, IC, EAC, and RoHS certified — fully IC-certified for Canadian sale. Includes 24V 0.8A power adapter, Gigabit PoE injector, desktop stand, ceiling mount bracket, wAP mount, K-52 fastening set, hose clamp, and plastic zip tie. 

The MikroTik GPeRx4 is a compact, IP68-rated outdoor PoE extender that splits a single high-power 802.3bt PoE input into three standard 802.3af/at PoE-out connections. It allows a single high-power PoE port to power multiple devices simultaneously, without the need for additional cabling infrastructure. Managed via SwOS Lite, it supports interface monitoring, VLAN configuration, traffic shaping, SNMP reporting, and fault detection — making it a smart and practical solution for outdoor PoE deployments. Note that the output ports are isolated and communicate only with the input port; this device functions as a PoE extender, not a switch.

The MikroTik CSS318-16G-2S+IN is a compact, passively cooled managed switch featuring 16 Gigabit Ethernet ports and 2 SFP+ 10G uplink ports, running MikroTik's lightweight SwOS operating system. Housed in a 10-inch form factor chassis that also fits 19-inch racks, it is ideal for deployments where 24 ports are too many and 8 ports simply are not enough. With browser-based configuration, broad SwOS feature support, and very low power consumption, it offers a practical and scalable solution for small to medium network environments.

The MikroTik RB260GS is a compact smart switch with 5x Gigabit Ethernet ports, 1 SFP cage, and SwOS for easy configuration. Ideal for small office and home networks.

The MikroTik CRS328-4C-20S-4S+RM is a feature-rich 1U rackmount managed switch offering 28 independent ports in a highly flexible configuration: twenty 1GbE SFP cages, four 10GbE SFP+ cages, and four combo ports that accept either a Gigabit Ethernet RJ45 connection or an SFP module. Powered by the 98DX3236 switching chip with a dual-core 800 MHz ARM CPU and 512 MB of RAM, it delivers non-blocking Layer 2 wire-speed switching. Like other CRS-series devices, it supports dual boot between RouterOS and SwitchOS, allowing operators to choose between full Layer 3 routing capability or a streamlined managed switch interface. Dual redundant power supplies provide high-availability operation.