List of products by supplier MikroTik

PWR-LINE US is a Type A power adapter with built-in PWR-LINE functionality, designed for microUSB-powered MikroTik routers like the hAP mini or hAP lite. It eliminates the need for LAN cables by creating a seamless connection between PWR-LINE compatible devices over your existing electrical wiring.

The MikroTik CME Gateway (CME22-2n-BG77) is a rugged outdoor CAT-M narrowband LTE IoT gateway — single-core MIPSBE QCA9531 at 650 MHz, 64 MB RAM, 16 MB FLASH, RouterOS v7 License 4, built-in CAT-M narrowband LTE modem (Nano SIM), built-in GPS, single-chain 802.11b/g/n 2.4 GHz Wi-Fi 4 (150 Mbps, 2 dBi) for local management via MikroTik smartphone app, 2× 10/100 Ethernet (Ether1: 802.3af/at PoE-in 18–57V; Ether2: passive PoE-out up to 57V 600 mA), 2-pin DC terminal 12–57V, 31W max consumption, IP66, -40°C to +70°C, MTBF ~100,000 hours at 25°C. CE, FCC, IC, EAC, RoHS certified. Includes 48V 0.95A power adapter, Gigabit PoE injector, two metal rings. 

The MikroTik KNOT (RB924i-2nD-BT5&BG77) is a universal IoT gateway — QCA9531 single-core MIPSBE at 650 MHz, 64 MB RAM, 128 MB NAND, RouterOS v7 License 4, NB-IoT/CAT-M cellular modem (Nano SIM), 2.4 GHz 802.11b/g/n Wi-Fi 4 (300 Mbps, 1.5 dBi), Bluetooth 5.2 (uUFL connector), GPS (SMA female), RS485 serial console, 2× 100 Mbps Ethernet (PoE-in 802.3af/at on Ether1, passive PoE-out up to 57V 12W on Ether2), microUSB, DIN rail mount + K-47 wall mount included, IP20, passive cooling, 122 × 87 × 26 mm, -40°C to +70°C, MTBF ~100,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 24V 1.2A adapter, K-47 wall mount, USB OTG cable, DIN rail mount. USD 99.00.

TG-BT5-IN: Compact indoor Bluetooth tags designed for proximity-based IoT tracking. Perfect for asset tracking in warehouses, construction sites, and other indoor environments. Features iBeacon, Eddystone, and MikroTik telemetrysupport.

The MikroTik GESP+POE-IN is a passive PoE injector with built-in surge protection — injects passive PoE power to mast-mounted antennas and access points while protecting downstream switches from lightning strikes and static build-up on outdoor cable runs. Designed as the ground-level companion to the GESP surge protector (mounted at the top of the mast) — together forming a dual-end surge protection system for outdoor deployments. Passive device — no RouterOS, no firmware, no configuration. Includes K-73 fastening set. Recommended attachment: PVC zip ties. USD 12.00.

The MikroTik MTP250-53V47-OD is an outdoor AC/DC power supply unit — 53V DC output, 250W, IP67 (fully dust-tight + immersion rated), designed for MikroTik netPower outdoor switches and devices requiring above-30V DC input, pole/wall mount compatible, 2× hose clamps included for mast mounting, sturdy sealed enclosure, -40°C to +70°C operating range, MTBF ~100,000 hours at 25°C. Primary use case: PTZ security camera networks and higher-voltage outdoor switch deployments. Companion variant: MTP250-26V94-OD (26V 250W for 12–30V devices). CE, EAC, RoHS certified. No RouterOS — standalone PSU. USD 99.00.

The MikroTik G1483 is a 6Ah LiFePO4 lithium iron phosphate battery backup unit designed for the MikroTik RB5009UG+S+IN, RB5009UPr+S+IN, RB5009UG+S+IN, and the hEX refresh (E50UG) — delivering 21.6Wh of backup energy at 3.6V nominal from a 1× 18650-format LiFePO4 cell array, with integrated charge management, over-discharge protection, and a battery health indicator. Dimensions 132 × 74 × 27 mm, weight 260 g. The correct battery backup unit to stock alongside any RB5009 or hEX refresh deployment where brief power interruption must not result in router reboot, configuration loss, or network downtime.

The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.

The RBPOE is a cost-effective passive PoE injector designed for powering 10/100Mbps RouterBOARD devices. It simplifies installations by reducing the number of cables required.

These 9 micron (OS2) fiber optic cable is made with Corning ClearCurve LBL glass fiber, which exceeds ITU-T G.657.A2/B2 and remains compatible and fully compliant with ITU-T G.652.D. It has 3mm jacket and rated low smoke zero halogen (LSZH) & riser (OFNR). They are tested to provide the optimum data transmission and network stability. They are used for connections to data center, CATV, fiber test equipment, LAN, telecommunication networks, FTTx, communication rooms and fiber optic communication system.