List of products by supplier MikroTik

The MikroTik NetMetal ax is a heavy-duty outdoor Wi-Fi 6 access point — AX3000 dual-band 802.11ax, 2×2 MIMO on both 2.4 GHz (574 Mbps, IPQ-5010, integrated 4 dBi dipole antennas) and 5 GHz (2,400 Mbps, QCN-6102, integrated 4 dBi dipole antennas), dual-core ARM32 IPQ-5010 at 800 MHz, 256 MB RAM, 128 MB NAND, RouterOS v7 License 4, 2× Gigabit Ethernet with 802.3af/at PoE-in on Ether1, DC jack (12–57V), USB 2.0 Type-A, metal die-cast enclosure, IP66, -40°C to +70°C, MTBF ~100,000 hours at 25°C. CE, EAC, RoHS certified. Includes N-type female external antenna connectors for both bands.

The MikroTik RB4011iGS+5HacQ2HnD-IN is a powerful indoor router combining ten Gigabit Ethernet ports, a 10Gbps SFP+ cage, and integrated dual-band 802.11ac Wi-Fi in a single desktop unit. At its core is a quad-core Cortex A15 AL21400 processor — the same architecture used in MikroTik's carrier-grade hardware — paired with 1 GB of RAM and hardware-accelerated IPsec, delivering serious routing performance for demanding environments. The 5GHz four-chain radio delivers up to 1733 Mbit/s (Wi-Fi 5), while the 2.4GHz two-chain radio adds 300 Mbit/s 802.11n coverage. Running RouterOS v7 with a MiniPCI-e expansion slot, passive PoE output on port 10, and dual power input options.

wAP LR9 kit is an out-of-the-box gateway solution for LoRa® technology, operating in the 902-928 MHz frequency range. It includes a weatherproof access point with a 2.4 GHz WLAN interface and an Ethernet port, pre-configured for seamless connectivity to public or private LoRa® servers.

The MikroTik GESP+POE-IN is a passive PoE injector with built-in surge protection — injects passive PoE power to mast-mounted antennas and access points while protecting downstream switches from lightning strikes and static build-up on outdoor cable runs. Designed as the ground-level companion to the GESP surge protector (mounted at the top of the mast) — together forming a dual-end surge protection system for outdoor deployments. Passive device — no RouterOS, no firmware, no configuration. Includes K-73 fastening set. Recommended attachment: PVC zip ties. USD 12.00.

The MikroTik PW48V-12V85W is an open-frame DC-DC power supply designed specifically for use with MikroTik Cloud Core Routers (CCR) from revision r2 onwards. It accepts ±48V DC telecom power input (with a supported range of 36V to 57V at up to 3A) and converts it to a regulated 12V / 7A (85W) output, allowing CCR devices to be powered directly from standard telecom ±48V DC plant infrastructure. An ideal solution for ISP and carrier-grade deployments where ±48V DC power is the standard.

The MikroTik MTP250-53V47-OD is an outdoor-rated AC/DC power supply unit designed to provide centralised 53 V power for MikroTik's netPower product line and other outdoor devices requiring higher-voltage DC power. Delivering up to 250 W at 53 V (approximately 4.7 A), it is housed in a rugged IP67-rated enclosure that provides full protection against dust ingress and immersion, making it suitable for demanding pole or wall-mount outdoor installations. It is the higher-voltage companion to the MTP250-26V94-OD (26 V / 250 W), and the appropriate choice for setups such as networks of PTZ security cameras or other outdoor equipment that requires a higher DC supply voltage. Two hose clamps are included for pole mounting. Certifications include CE, EAC, and RoHS.

The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.

The MikroTik DPS-550AB-36G is the official 550W hot-swap replacement power supply unit for the MikroTik ROSE Data Server (RDS2216). Engineered to match the RDS2216's energy-efficient, low heat-output architecture, it can be installed and replaced live — no shutdown, no service interruption, no data loss. At 12V / 550W output, the DPS-550AB-36G is the correct spare PSU to keep on-site for any ROSE Data Server deployment where uptime is a requirement.

The MikroTik LHG 5 ax (LHG-5axD) is the compact, budget-entry Wi-Fi 6 long-range outdoor CPE in MikroTik's LHG ax series — the same modern 802.11ax platform as the XL model, at 24.5 dBi antenna gain. With 5 GHz Wi-Fi 6 at 1,200 Mbps, WPA3 security, Gigabit Ethernet with passive PoE-in (12–28V), dual-core IPQ-5010 ARM CPU, 256 MB RAM, aerodynamic grid antenna, IP54 weatherproofing, and FCC and IC certification, it is purpose-built for stable point-to-point links up to 20 km — ideal for building-to-building bridges, WISP CPE deployments, and remote site connectivity at an accessible entry price.

The MikroTik LHG XL 5 ax (LHG-5axD-XL) is the high-gain long-range outdoor Wi-Fi 6 CPE built for point-to-point links that demand maximum reach and signal stability. With a 27 dBi integrated grid antenna, 5 GHz 802.11a/n/ac/ax at 1,200 Mbps, WPA3 security, dual-core IPQ-5010 ARM CPU, 256 MB RAM, passive PoE powering (12–28V), IP54 weatherproofing, FCC and IC certification, and RouterOS v7 — it is capable of stable PtP links up to 30 km in ideal conditions. The XL model is the right choice when the standard LHG 5 ax (24.5 dBi) is not enough.