List of products by supplier MikroTik

The MikroTik hAP be lite is an affordable Wi-Fi 7 router and access point with RouterOS v7, dual-band wireless, 1x 2.5G Ethernet port, 3x Gigabit Ethernet ports, USB-C power, 512 MB RAM, and compact desktop design. It supports Wi-Fi 7 Multi-Link Operation and is ideal for homes, small offices, labs, and users who need advanced RouterOS features in a small and budget-friendly device.

The MikroTik SolidRACK 5 mini is a compact 10-inch 5U desktop rack designed for routers, switches, power distribution equipment, and other standard 10" rack devices. It features an adjustable mounting angle, sliding mounting nuts, lightweight aluminium construction, extra cable-management space, and under-desk mounting support, making it ideal for compact network installations. 

The MikroTik MTP60-12V50-RS-DC is a 60W DC-DC hot-swappable power supply designed for compatible MikroTik devices including the CCR2004-16G-2S+, CRS504-4XQ-IN, and CRS510-8XS-2XQ-IN. It accepts -36V to -57V DC input and provides 12V DC output at up to 5A, making it ideal for integrating these devices into -48V DC-powered infrastructure while maintaining redundant power capability. 

The MikroTik RB4011iGS+5HacQ2HnD-IN is a powerful indoor router combining ten Gigabit Ethernet ports, a 10Gbps SFP+ cage, and integrated dual-band 802.11ac Wi-Fi in a single desktop unit. At its core is a quad-core Cortex A15 AL21400 processor — the same architecture used in MikroTik's carrier-grade hardware — paired with 1 GB of RAM and hardware-accelerated IPsec, delivering serious routing performance for demanding environments. The 5GHz four-chain radio delivers up to 1733 Mbit/s (Wi-Fi 5), while the 2.4GHz two-chain radio adds 300 Mbit/s 802.11n coverage. Running RouterOS v7 with a MiniPCI-e expansion slot, passive PoE output on port 10, and dual power input options.

The wAP ac LTE6 kit is a robust, dual-band wireless access point with CAT6 LTE modem for up to 300 Mbps download speed. Designed for indoor and outdoor use, it’s ideal for homes, remote areas, or as a backup connectivity solution.

The MikroTik GESP+POE-IN is a passive PoE injector with built-in surge protection — injects passive PoE power to mast-mounted antennas and access points while protecting downstream switches from lightning strikes and static build-up on outdoor cable runs. Designed as the ground-level companion to the GESP surge protector (mounted at the top of the mast) — together forming a dual-end surge protection system for outdoor deployments. Passive device — no RouterOS, no firmware, no configuration. Includes K-73 fastening set. Recommended attachment: PVC zip ties. USD 12.00.

The MikroTik PW48V-12V85W is an open-frame DC-DC power supply designed specifically for use with MikroTik Cloud Core Routers (CCR) from revision r2 onwards. It accepts ±48V DC telecom power input (with a supported range of 36V to 57V at up to 3A) and converts it to a regulated 12V / 7A (85W) output, allowing CCR devices to be powered directly from standard telecom ±48V DC plant infrastructure. An ideal solution for ISP and carrier-grade deployments where ±48V DC power is the standard.

The MikroTik XQ+CM0000-XS+ is a QSFP28 to SFP28 form-factor converter — a passive adapter that allows any SFP / SFP+ / SFP28 module (1G / 10G / 25G) to be inserted into a QSFP28 100G/40G port, enabling the use of existing SFP28 transceivers and DAC cables in QSFP28 port-equipped switches without a separate SFP28 switch layer. Tested ambient temperature -20°C to +85°C, MTBF ~100,000 hours at 25°C. No certifications published. The correct port-conversion accessory for CRS504-4XQ-IN, CRS518-16XS-2XQ-RM, CRS510-8XS-2XQ-IN, and any MikroTik or third-party switch with QSFP28 ports where existing SFP28 25G, SFP+ 10G, or SFP 1G modules need to be utilised without rewiring or adding a downstream switch.

The MikroTik DPS-550AB-36G is the official 550W hot-swap replacement power supply unit for the MikroTik ROSE Data Server (RDS2216). Engineered to match the RDS2216's energy-efficient, low heat-output architecture, it can be installed and replaced live — no shutdown, no service interruption, no data loss. At 12V / 550W output, the DPS-550AB-36G is the correct spare PSU to keep on-site for any ROSE Data Server deployment where uptime is a requirement.

The MikroTik LHG 5 ax (LHG-5axD) is the compact, budget-entry Wi-Fi 6 long-range outdoor CPE in MikroTik's LHG ax series — the same modern 802.11ax platform as the XL model, at 24.5 dBi antenna gain. With 5 GHz Wi-Fi 6 at 1,200 Mbps, WPA3 security, Gigabit Ethernet with passive PoE-in (12–28V), dual-core IPQ-5010 ARM CPU, 256 MB RAM, aerodynamic grid antenna, IP54 weatherproofing, and FCC and IC certification, it is purpose-built for stable point-to-point links up to 20 km — ideal for building-to-building bridges, WISP CPE deployments, and remote site connectivity at an accessible entry price.